Product Categories in this Section
-
Cragstan Great Astronaut Replacement Face Shield. We create the face shield from a mold taken of an original part. This ensures a perfect fitting and authentic replacement part requiring no refinishing or alteration prior to installation. The results are undeniable and sure to please. We also employ the same process when re-creating our tin and metal parts, which we pre-fit to an original toy prior to shipping to you.
-
This is a real, metal replacement battery box for the Cragstan Mr. Robot toy. It comes complete with the contact boards with new contacts and installs exactly like the original.
-
Cragstan Mr. Robot Replacement Eyes. This is a set of replacement eyes for the Cragstan Mr. Robot. These easily glue in place with just a couple drops of super glue.
-
Daiya Japan Martian Supersensitive Radar Jeep - These are replacement windshield domes for the Daiya, Martian Supersensitive Radar Jeep. Sold as a set of two for a perfectly matched set and best look.
-
Dan Dare SS Eagle Spaceship Canopy for the tin friction rocket from Mettoy of Great Britton. This replacement canopy is an exact copy of an original toy part and is produced in amber tint. The canopy is a removable toy part that allows for flint sparking replacement. This new part contains all of the original flaws of the master part and looks tremendous! Uncle Al is the only toy specialist making this part in amber tint to match the original! Just snap it on and you're good to go.
-
A new flexible plastic square tip propeller for the Cragstan or Yonezawa battery operated DC-7c aircraft toys. The perfect solution to those old broken or glue covered propellers. Our new prop is a bit more flexible than the original. Please note the wings must be disassembled in order to correctly install these propellers.
-
This brand new replacement seat for the Doepke Model Toy is created from a mold taken of an original toy part and is guaranteed to fit perfectly. The seat has the same bosses with a drilled hole to accommodate screw on fastening just like original. The seat should be washed with soap and water to remove mold release agent before painting or adhering cloth. This seat is available no where else but here and is in stock.
-
Duromold Flying Saucer Bank Dome - This listing is for one replacement dome for the Duromold Flying Saucer Bank. This dome is an exact replica of the original part and is guaranteed to be a perfect fit! Just pop it on! The bank in the photographs is for display purposes only and not for sale.
-
Here we have a replacement windows for the battery-operated Horikawa Space Station. The replacement windows are vacuum formed of the same thickness clear plastic as the originals for a perfect fit.
-
Made exactly like the original, this tin tower will fit perfectly should your Space Station be lacking. My tower also comes with the drive wheel and shaft for the large plastic antenna dish. (sold separately) This tower is used on both the red and blue versions of this toy.
-
A new cockpit/canopy set for the Hubley Kiddie Toy Fighter Bomber and P-47 die cast metal airplanes. We create all of our reproduction parts from a duplicating process using original toy parts (NOT 3D!). This ensures a perfect fitting and authentic replacement part requiring no refinishing or alteration prior to installation. The results are undeniable and sure to please. We employ the same process when re-creating our tin and metal parts, which we pre-fit to an original toy prior to shipment.
-
Ichiko Space Patrol Car Astronaut Driver Head - This is a replacement replica tin head for the Ichiko Space Patrol Car. I fabricated my first one of these from pictures of the original. They are comprised of four pieces, front and rear of the helmet, inside face and outer earmuffs and strap. I have since acquired an original head and have created new tooling so that my replacement head is now near perfect! I also replicate the windshields and frames for this toy which run $175.00. These take about 4 weeks to complete from the time of order.
-
A replica cap compartment cover for the 1950's Ideal Atomic Machine Gun. This cap is near perfect and almost a dead ringer for the often missing plug. The fit is tested on my own toy and an original stack of 5 Kilgore Roll Caps (not included) is inserted and then capped. I believe the original cap was a hollow injection molded part and quite flimsy, which is why they're almost always missing. I still resin cast my part but I designed it to be solid with the exterior look of the original. Please ask if you're looking for or need custom parts!
-
A replica hand crank for the 1950's Ideal Atomic Machine Gun. Created from a mold taken of an original toy part, it is stronger than original because I solid cast the square end that fits into the gun. I also solid cast the pin for turning the crank. The fit is tested on my own toy to ensure accuracy. I still resin cast my part but I designed it to be solid with the exterior look of the original. Please ask if you're looking for or need custom parts!
-
A replacement brass metal battery holder and lightbulb for the 1960’s Ideal Toys Robert the Robot. The battery holder is a perfect fitting replacement brass part complete with a correct, new bulb. We test fit each battery bar to an original toy robot to ensure an exact fitting installation.
To install, just remove Robert's head and insert the battery into the holder. Install the part into the robot's body cavity and reinstall the head. He is now ready to light up!
-
Irwin 'Man From Mars' Replacement Bubble Helmet A two piece bubble helmet for the Irwin 'Man From Mars' wind up toy from the 1950's. The helmet comes in two pieces as shown and installs just as the original. There are 4 alignment pins on one helmet half and 4 corresponding holes on the other half. A small bit of super glue to each pin will secure the helmet to the spaceman. There is a hole in the top of the helmet for the rubber antenna, which is also available here on this site. Many of the original bubbles are missing, cracked and re-glued or have become clouded or crazed from age. My new bubble is guaranteed to be an excellent fit and remain clear for years to come!
-
Irwin Man From Mars Replacement Antenna</p> This is an exact copy of the original Irwin Man From Mars Antenna and is molded in rubber. It will fit the original plastic helmet or our new replacement helmet, also sold here. The antenna should be softened in hot water prior to installing in an original, sealed helmet so as not to crack the plastic from too much stress. Just insert with a slight twisting motion. You could also add a drop of dish soap for lubrication to the antenna base to ease insertion. These parts are in stock and ready to ship.
-
A replacement hat brim for the Strauss Jenny The Balky Mule Wind Up Toy.
-
Kanto Battery Operated Space Patrol - Replica Tower and Radar Dish, available ONLY through Uncle Al! - You won't find a more accurate, perfect fitting replica tower anywhere else. An outstanding original was borrowed for reference in the dimensioning, fit and color of this replica and it installs just as the original - an easy installation that you can do yourself with my instructions. The Kanto Space Patrol vehicle is one of the most highly sought after space toy collectibles and many times is missing this critical detail part. My re-creation is made exactly like the original 10 piece part. It comes painted in the correct colors and installs in minutes. This part is hand made to order, so please allow a minimum of two weeks for assembly prior to shipping. Another fine part available nowhere else!
-
Kanto Space Patrol Friction version replica cannon expertly crafted for a perfect fit.
-
Lincoln Continental Hood Ornament Antenna Set A reproduction tin and metal hood ornament/antenna combination for the Linemar 1956 Lincoln Continental tin cars. These parts are compatible with all versions of the Linemar Lincoln battery operated friction and remote control. The company liked to ship these parts separately from the toy and as a result, these parts were often lost. I fabricate the reproduction hood ornament exactly as the original with a large tab on the bottom side. This feature allows the hood ornament to insert easily into the slot above the grill. The reproduction antenna is the same as the original diameter of the shaft and fits correctly into the hole in the fender. The car in the picture is for display purposes only and is not for sale. These parts are now made to order. Please allow two weeks for delivery.
-
A reproduction metal cast anchor which fits the early 1900’s Large Marklin battleships. This anchor will fit the Battleship New York, Columbia and several others. Available in painted (black) or unpainted condition. I had the pleasure of performing some intricate repairs on a Columbia Battleship. Part of the Malcolm Forbes Collection and acquired at auction by The Dallas Elite Toy Museum. Other custom parts are available upon request.
-
Replacement Battery Cover for the Marusan Cadillac This listing is for a tin replacement battery box cover for the battery operated version of the Marusan Cadillac. The cover is often found missing from the Cadillac cars since the attachment is not permanent. As you can see, this new cover fits perfectly and looks great! A side by side comparison shows very slight differences between the two covers. My replacement has a larger piece of electrical board installed and the tongue latch is a bit longer for a better hold to the car. We prime the cover before finishing it with an automotive lacquer that matches the Marusan black color. The painted cover is then given a final polish. Just remove the cover from the packaging and install it on your car. Absolutely no disappointments with this part!
-
Here we have a Convertible Replacement Windshield for the Marx Dick Tracy squad car. This is a brand-new replacement windshield for the 1950's 20" tin Marx Dick Tracy squad, Marx Army Command and Fire Chief friction drive cars. The windshield is created from a mold taken of an original 6 PIN windshield. This windshield will also fit the 4 PIN vehicles simply by removing the second pins from the ends. The convertible replacement windshield is fitted to a tin vehicle during the curing process for a guaranteed excellent fit!
-
A new replacement RED LENS for the large 20" Marx friction cars with Electric Siren lights. The lens will fit the Marx Dick Tracy Squad Car, the Army Command Car and the Fire Chief Car. This lens is an exact copy of the original and is made to function exactly the same.
-
A replacement gun tip for the 1950's Marx Captain Space Solar Scout Rifle. We create parts from a mold taken of an original toy part cast in urethane. It is as close to an injection molded original toy part as you can get. It is NOT a 3D printed part! The gun tip simply slides on to the end of your rifle. Install the screw and nut (not included) and you're done. The replacement tip is available in three Marx colors; red, green and blue. We test fit each part and guarantee the part to be a perfect fit.
-
Marx Captain Space Solar Scout Rifle REPLACEMENT CLEAR LENS. Crystal clear and screws on just like the original. Listing is for the CLEAR LENS ONLY, gun shown for identification and clarity only. These are in stock and ready to ship.
-
A new, replacement metal helmet ring and fiber insulator for the Marx Colonel Hap Hazard battery operated Robot and the Marx Hi-Bouncer Moon Scout Robot. These parts are commonly missing from the toy because of aggressive removal of the lighted antenna. The ring and fiber gasket design keeps the lighted antenna from shorting out during operation. We fabricate these parts from original toy parts for dimensional reference. Test fitting each part to the original toy ensures a hassle free, easy installation.
-
New hollow cast OXYGEN TANKS for the Marx Colonel Hap Hazard battery operated robot (set of 2). We create our reproduction parts from a duplicating process using original toy parts (NOT 3D!). This process ensures a perfect fitting and authentic replacement part requiring no refinishing or alteration prior to installation. The results are undeniable and sure to please. We employ the same process when re-creating our tin and metal parts, which we pre-fit to an original toy prior to shipment.
-
A new battery cover LATCH for the Marx Colonel Hap Hazard battery operated robot. We create our reproduction parts from a duplicating process using original toy parts (NOT 3D!). This process ensures a perfect fitting and authentic replacement part requiring no refinishing or alteration prior to installation. The results are undeniable and sure to please. We employ the same process when re-creating our tin and metal parts, which we pre-fit to an original toy prior to shipment.Your new latch comes with the brass mounting eyelet as shown, JUST AS ORIGINAL!
-
A new ON/OFF SWITCH for the Marx Colonel Hap Hazard battery operated robot. We create all of our reproduction parts from a duplicating process using original toy parts (NOT 3D!). This process ensures a perfect fitting and authentic replacement part requiring no refinishing or alteration prior to installation. The results are undeniable and sure to please. We employ the same process when re-creating our tin and metal parts, which we pre-fit to an original toy prior to shipment.
-
This listing is for a new, WORKING replacement antenna for the Marx Colonel Hap Hazard and Hi- Bouncer Moon Scout battery operated robots. All of our reproduction parts are created from a duplicating process (NOT 3D!) using original toy parts. Parts such as this one, which feature electric, lighted components, are thoroughly researched and materials are used that most closely create the function of original parts. Correct diameter brass tubing is used on the base of the antenna for seamless, constant electrical contact just as the original part. This is done to ensure perfect fitting and authentic replacement parts that require no refinishing or altering prior to installing on your vintage toys. The results are undeniable and sure to please. We also employ this process when re-creating our tin and metal parts, which are always pre-fitted to an original toy prior to shipping to you.
-
Marx Dick Tracy Squad Car / Army Command Car / Fire Chief Car replacement siren light. This fabulous replacement light is exactly like the original and comes completely wired with socket and bulb. Just attach and install as original. The rear housing can also be molded in olive drab on request but standard in stock is yellow/red
-
A replacement windshield for the Marx Mechanical Roaster and Marx Disney Parade wind-up cars. Created from a mold taken of an original toy part and guaranteed to fit exactly like the original. The Marx Roadster wind-up vehicles are identified by their lithographed license plates 'D-6581' and are technically called the Mechanical Roadster. They have solid rubber wheels and a clockwork spring motor. The Marx Disney Parade Roadsters are covered in colorful lithographed images of various Disney characters. Both versions of this toy share the common clear plastic windshield and steering wheel. These vehicles were first introduced around 1950.
-
A replacement steering wheel for the Marx Disney Parade and Marx Mechanical Roadster wind-up cars. Created from a mold taken of an original toy part and guaranteed to fit exactly like the original. The Marx Roadster wind-up vehicles are identified by their lithographed license plates 'D-6581' and are technically called the Mechanical Roadster. They have solid rubber wheels and a clockwork spring motor. The Marx Disney Parade Roadsters are covered in colorful lithographed images of various Disney characters. Both versions of this toy share the common clear plastic windshield and steering wheel. These vehicles were first introduced around 1950.
-
Marx Electra II Propeller, Square Tip, Replacement Plastic NEW flexible plastic propellers for the Marx Electra II aircraft toys are the perfect solution to those old broken or glue covered propellers. These new props are a bit more flexible than the originals propellers. It installs easily.
