-
Replacement Battery Cover for the Marusan Cadillac This listing is for a tin replacement battery box cover for the battery operated version of the Marusan Cadillac. The cover is often found missing from the Cadillac cars since the attachment is not permanent. As you can see, this new cover fits perfectly and looks great! A side by side comparison shows very slight differences between the two covers. My replacement has a larger piece of electrical board installed and the tongue latch is a bit longer for a better hold to the car. We prime the cover before finishing it with an automotive lacquer that matches the Marusan black color. The painted cover is then given a final polish. Just remove the cover from the packaging and install it on your car. Absolutely no disappointments with this part!
-
A wonderful 1953 Marusan Kosuge Cadillac friction toy in excellent, fully working condition. A must have for collectors and enthusiasts alike!
-
Marx Captain Space Solar Scout Rifle REPLACEMENT CLEAR LENS. Crystal clear and screws on just like the original. Listing is for the CLEAR LENS ONLY, gun shown for identification and clarity only. These are in stock and ready to ship.
-
Marx Hootin Hollow Haunted House Black CAT is a perfect reproduction of the original toy part. Many of these Marx houses are either missing the entire cat or the cat is missing the tail, which is quite fragile and prone to breakage. I take great care to cast the cat in black plastic and add paint for the yellow eyes and red tongue, just like the original! Marx Hootin' Hollow Haunted House first appeared on TV in the mid 1960's. The commercial features a spooky announcer and two children playing with and truly enjoying the houses many amazing features. The toy boasts a jumping cat, a witch behind the opening front door, a ghost floating in the air behind a lighted window, a scary window shade, a shaking roof with banging shutters, a skeleton that jumps out of the chimney, a spooky, eerie sound and a frightening loud whistling noise. All of these features are operated by buttons and 3 'D' cell batteries. We have other parts available for this toy: the witch behind the door, the skeleton in the chimney, the gray buttons, and the tin inner battery box.
-
Hootin Hollow Haunted House Button is a perfect reproduction of the original toy part. If your haunted house is missing any of the little buttons for operating the different house functions, your prayers are answered! We carefully color match our plastic to blend in our new buttons with your existing toy buttons. Marx Hootin Hollow Haunted House first appeared on TV in the mid 1960’s. The commercial features a spooky announcer and two children playing with and truly enjoying the houses many amazing features. The toy boasts a jumping cat, a witch behind the opening front door, a ghost floating in the air behind a lighted window, a scary window shade, a skeleton that jumps out of the chimney, a shaking roof with banging shutters, a spooky, eerie sound and a frightening loud whistling noise. All of these features operate by buttons and 3 ‘D’ cell batteries. Other parts we have available for this toy include the witch behind the door, the standing black cat, the jumping skeleton, the tin battery box door, the tin inner battery box and the tin rear house panel.
-
Hootin’ Hollow Haunted House Skeleton is a perfect reproduction of the original toy part. If your haunted house is missing the skeleton that’s jumping out of the chimney, your prayers are answered! Marx Hootin’ Hollow Haunted House first appeared on TV in the mid 1960’s. The commercial features a spooky announcer and two children playing with and truly enjoying the houses many amazing features. The toy boasts a jumping cat, a witch behind the opening front door, a ghost floating in the air behind a lighted window, a scary window shade, a shaking roof with banging shutters, a spooky, eerie sound and a frightening loud whistling noise. All of these features are operated by buttons and 3 ‘D’ cell batteries. Other parts we have available for this toy include the witch behind the door, the standing black cat, the tin battery box door, the tin inner battery box and the tin rear house panel.
-
Marx Hootin Hollow Haunted House Witch is a perfect reproduction of the original toy part. The replacement made from tin, decorated and mounts to the door just like original! Marx Hootin Hollow Haunted House can be seen in a mid 1960's TV commercial featuring a spooky announcer and two children playing with the house. The actions are triggered by pressing the buttons on the side. A jumping cat, a witch behind the opening front door, a ghost floating in the air behind a lighted window. A scary window shade, a shaking roof with banging shutters, a skeleton that jumps out of the chimney. A spooky, eerie sound and a frightening loud whistling noise. All of these features are operated with 3 'D' cell batteries.
-
A new replacement small driver for the Marx Race Cars requiring a smaller driver with a single mounting pin. The part is cast in the white color as shown. Please see my other listing offering the dual mounting pin driver. It is a bit larger and fits the larger race cars and roadsters. These replacement drivers are the nicest available and fit perfectly just as the originals.
-
Another NEW part from Uncle Al's Toys and available NO WHERE ELSE is this great replacement lens for the Marx or Halco flashlight pistols, Marx Space Patrol Atomic Flashlight Pistol, Halco Planet Patrol Flashlight Pistol and Rex Mars Planet Patrol Flashlight Pistol. Beautifully clear lens screws on just like the original and can be made in slightly tinted colors upon request. Uncle Al is also a specialist in repairing broken plastic ray guns!
-
A replacement cast metal propeller for the Mastercrafters Sessions Airplane Clock. Cast from a mold created of an original clock part and is a guaranteed fit for your clock. I cast these parts myself. All of the pictures you see here are of the new replacement part, not an original. The metal castings are filed, sanded and lightly polished. I decided not to plate the propeller as they looked quite appropriate in the lightly polished bare metal state. Protect the integrity and value of your clock by reinstalling a REAL METAL replacement propeller. This is a bare metal casting and is NOT plated.
-
A new replacement, metal tail wheel for the Master Crafters Sessions Wooden Airplane table clock. I made a mold of an original tail wheel, and I cast and finish these myself.
-
Reproduction Whistle for the Masudaya Sonicon Rocket. With a blow of the whistle, you control the direction of the rocket. Guaranteed to perform just like the original whistle!
-
A replacement Amber Canopy for the A.L. Maxey Challenger Jr. race car. Created from a mold taken of an original part to ensure an accurate fit.
-
This listing is for a plastic replacement battery cover for the Melvin G Miller Texas Oil Well Pumping Unit. The battery cover comes in red or white and the wording can say Humble or Wildcat. Please specify your selection when you place the order. You will receive one replacement battery cover. The pumping unit in the picture is for display purposes only.
-
Alps Lincoln Futura Metal Steering Wheel is an exact fitting replica of the original toy steering wheel. This part will fit all variations of the Alps Futura cars; friction, battery operated, and remote control. The replacement wheel mounts to the toy using the same tab/slot configuration and is easy to install. Also available for this toy are the rubber tires and the spring shaft deck antenna. The Alps Futura concept car is a stunning creation that is still popular today. Alps did a magnificent job of recreating this fine automobile in the tin.
-
Here we have a new RED replacement jet cone for your Nomura (TN) Japan 3 Stage Rocket. The pins on the original toy cones were very easily broken due to their outside location on the main body of the rocket. This toy REALLY moves when in operation and it's understandable why these fragile parts would break. The installation of these parts is not for the inexperienced individual. There are tiny light bulbs (not included) on very short wires that mount to the back of the cones and great care must be taken when removing the old cones. This is the ONLY source for this toy part and it is a perfect replacement!
-
This listing is for a new replacement engine cover for the Nomura R-10 VW Space Patrol Car or for the Nomura Piston Tractor. This clear engine cover may have been used on other Nomura toys that I'm unaware of. The part was created from a mold taken of an original toy part and is guaranteed a perfect fit and crystal clear. The toys pictured are used to clarify the part in this listing and are NOT INCLUDED or for sale.
-
This listing is for a metal replacement battery cover door that fits the Nomura battery operated Robby Space Patrol, the Moon Car - Moon Patrol Space Division #3 and the Moon Space Ship. This replacement door is a hand worked, three piece reproduction of the original cover and each one is fitted to a toy to ensure proper fit and function. The bottom of the toy needs to be accessible in order to properly attach the cover. The hinges come pre-bent for proper insertion and care must be taken when installing. The reason so many of these toys end up with missing covers is primarily due to the fragile design of the hinges. Once the hinges are inserted into the 'L' slots (working from the inside of the toy), the hinge pins that are bent at 90 degrees are straightened with a plier to form a 'T' shape, effectively locking the door in place. I use a duck bill plier to flatten the hinge completely. If you are uncomfortable opening up the toy, the door hinges can be carefully inserted into the 'L' shaped slots and then closed and latched but please note that this should only be done if you don't intend to insert the batteries. The cover, when inserted this way is only being supported by one half of each hinge. The battery weight will put too much pressure on the hinge and could break the pins. As you can see in the pictures, I've inserted a door into the bottom of one of my toys to test the fit of the door when the latch is engaged. Each door I make is tested in this fashion to guarantee an excellent fit for your toy. Other parts are available for this toy and will be listed soon.
-
&amp;amp;lt;span style="font-size: large;">A replacement Battery Cover Latch for the Nomura Robby Space Patrol/Moon Patrol. The latch attaches <span class="yoast-text-mark">class="yoast-text-mark">e="font-size: large;">to your existing battery cover door. This latch can be used on Robby Space Patrol, the Moon Car - Moon Patrol Space Division #3 and the Moon Space Ship.
-
Pyro X-300 Space Cruiser rocket ship clear replacement nose cone, crystal clear and easily snaps in place like the original. Other parts are available for this toy as well as the Pyro X-400.
-
Pyro X-400 Space Explorer Replacement Canopy for the 1960's Pyro X-400 Space Explorer plastic spaceship. Created from a mold taken of an original toy part to ensure the utmost accuracy in the snap-fit installation, just like the original.
-
This tail wheel was cast from a mold created of an original clock part and is a guaranteed fit for your clock. I cast these parts myself. All of the pictures you see here are of the new replacement part, not an original. The metal castings are filed, sanded and lightly polished. I haven't tried plating them yet as they looked quite appropriate in the lightly polished bare metal state. Protect the integrity and value of your clock by reinstalling a REAL METAL replacement tail wheel. This is a bare metal casting and is NOT plated. *Please note that the Sessions Airplane Clock shown is my personal clock and is shown for reference only and is not included or for sale. You will receive ONE TAIL WHEEL ONLY.
-
Replacement Steering Wheel for Urbana Mfg. CROSBY Electric Towmotor Forklift Salesman Sample
-
The Robby Space Patrol, Moon Patrol replacement lens is available in red or green. This high-quality replacement part is guaranteed to be a perfect fit! Please specify your color choice.
-
Replacement front bumper cones for the rare Sensco Japan Future Car or the TV Space Patrol friction car. The TV Space Patrol Car cones come with the slight teal blue tint as original and the Future Car comes clear green tinted as original. Please specify which you need at the time you order. These cones are sold only in pairs for a perfect color match on your rare toy. TV Space Patrol Car tin mounting rings are sold separately.
-
A set of replacement Ears for the Strauss Jenny the Balky Mule toy.
-
A replacement Race Car Driver for the Marx Mechanical Roadster and Indy race car offered in yellow or white. Please contact me to let me know your color selection. This is a near perfect replacement toy part made from a mold taken from an original part. It will install just like the original with no disappointments! These items are in stock and ready to ship. Looking for a great Marx car?
-
Thomas Toys Atom Bomber B-29, Replacement Metal Bomb - This is a replacement metal bomb for the 1950's Thomas Toys plastic B-29 Atom Bomber toy aircraft. It was made from a mold of an original toy part and is authentic to the toy.
-
High-quality replacment feder light part made from cast metal for the Tippco 1930's Mercedes Fuhrerwagen Staff Car.
-
Tippco Mercedes Fuhrerwagen Staff Car with our Replacement Exhaust Header. This premium quality reproduction is specifically crafted to match the original exhaust header of the iconic 1930s Tippco model, ensuring a seamless integration and perfect fit.
-
TN Nomura Astronaut Helmet. A replacement astronaut helmet for the battery-operated Nomura Moon Patrol Space Division #3 or the Mobile Space TV Unit with Trailer. Created from a mold taken of the original toy part to guarantee a perfect fit. The helmet includes both a red and yellow cone. The red cone is correct for the Mobile Space TV Unit with Trailer and the yellow cone is correct for the Nomura Moon Patrol.
-
Another one of my personal favorites is this fabulous TN/Nomura/Baravelli Sonic Car Dodge Charger in 100% original condition and in the original box with insert foam blocks. The Sonic whistle has never been removed from it's plastic bag. Each blow of the whistle commands the car to perform a different function, forward, reverse, left and right and finally for the machine guns to propel out of the roof of the car with bright flashing muzzle fire! Unique and again, a large 15" long by 6" wide and 5" tall. There is slight oxidation on the brightwork trim of the car but overall is just stunning! Operates on 2 'D' cell and 1 9volt battery.
-
Tommy-Ray Space Gun Replacement Bee Hive Battery Cap - A perfect fitting replacement Bee Hive Battery Cap for the B-W Molded Plastics Company 'Tommy-Ray Space Gun'. The space gun is a battery operated toy featuring a noisy, vibrating ray gun blast with a light up gun tip. The toy operates on two 'D' cell batteries. When batteries are inserted into the back of the gun, a folding brass contact tips up against the negative side of the battery and the Bee Hive Cap secures the brass tightly to the battery. Without the cap, the battery does not maintain contact. Due to the nature of the plastic used in manufacturing this toy, warping of the plastic battery opening often occurs in the absence of the cap. This issue can be remedied by applying medium heat with a heat gun or hair dryer completely around the battery opening, but not TOO much. *Be sure to remove the batteries before attempting this procedure!* Once softened the cap can be used to round the opening once more by manipulating the tabs of the cap into the opening and allowing the warmed plastic to cool, but this process must be done quickly as the plastic cools quickly. Many Tommy-Ray Space Guns no longer work. There is little to no way to service them because of the adhesive and type of plastic used. They are literally fused together and I've yet to successfully separate one to date. With that being said, they are still excellent display toys when complete and REALLY look good with the matching helmet and box.
-
A perfect fitting replacement Bee Hive Gun Tip for the B-W Molded Plastics Company 'Tommy-Ray Space Gun'. The space gun is a battery operated toy featuring a noisy, vibrating ray gun blast with a light up gun tip. The toy operates on two 'D' cell batteries. The Bee Hive Gun Tip is a removable toy part that provides access to the light bulb in the end of the gun and it slips snugly over the plastic that surrounds the back of the light bulb. Many Tommy-Ray Space Guns no longer work. There is little to no way to service them because of the adhesive and type of plastic used. They are literally fused together and I've yet to successfully separate one to date. With that being said, it is still an excellent display toy when complete and it REALLY looks good with the matching helmet and box.
-
A new replacement round rubber cap/plug for the mid 1970's Tomy WEE Waterful and Two Player water games. The replacement cap/plug is an exact copy of an original part and is guaranteed to be a perfect fit. The cap fits perfectly and seals nicely as it is a soft rubber. You can also keep one in the spare compartment underneath, just like the toy originally came with. They are available in WHITE color only. Over time, they will change to a cream color just like the original caps.
-
The Toy Masters Space Survey Jeep friction toy sometimes comes with a tin astronaut driver, but always has a telescope that swings back and forth. A shaft protrudes vertically through the rear of the telescope and the antenna will rotate 360 degrees when mounted atop that shaft. Uncle Al's also fabricates the replacement telescope and cradle assembly for this toy.
Copyright © 2024 Uncle Al's Toys. All rights reserved.
Website design and developed by Concept Infoway LLC