-
Daiya Japan Martian Supersensitive Radar Jeep - These are replacement windshield domes for the Daiya, Martian Supersensitive Radar Jeep. Sold as a set of two for a perfectly matched set and best look.
-
A new flexible plastic square tip propeller for the Cragstan or Yonezawa battery operated DC-7c aircraft toys. The perfect solution to those old broken or glue covered propellers. Our new prop is a bit more flexible than the original. Please note the wings must be disassembled in order to correctly install these propellers.
-
This brand new replacement seat for the Doepke Model Toy is created from a mold taken of an original toy part and is guaranteed to fit perfectly. The seat has the same bosses with a drilled hole to accommodate screw on fastening just like original. The seat should be washed with soap and water to remove mold release agent before painting or adhering cloth. This seat is available no where else but here and is in stock.
-
Here we have a replacement windows for the battery-operated Horikawa Space Station. The replacement windows are vacuum formed of the same thickness clear plastic as the originals for a perfect fit.
-
A new cockpit/canopy set for the Hubley Kiddie Toy Fighter Bomber and P-47 die cast metal airplanes. We create all of our reproduction parts from a duplicating process using original toy parts (NOT 3D!). This ensures a perfect fitting and authentic replacement part requiring no refinishing or alteration prior to installation. The results are undeniable and sure to please. We employ the same process when re-creating our tin and metal parts, which we pre-fit to an original toy prior to shipment.
-
A replica cap compartment cover for the 1950's Ideal Atomic Machine Gun. This cap is near perfect and almost a dead ringer for the often missing plug. The fit is tested on my own toy and an original stack of 5 Kilgore Roll Caps (not included) is inserted and then capped. I believe the original cap was a hollow injection molded part and quite flimsy, which is why they're almost always missing. I still resin cast my part but I designed it to be solid with the exterior look of the original. Please ask if you're looking for or need custom parts!
-
A replacement brass metal battery holder and lightbulb for the 1960’s Ideal Toys Robert the Robot. The battery holder is a perfect fitting replacement brass part complete with a correct, new bulb. We test fit each battery bar to an original toy robot to ensure an exact fitting installation.
To install, just remove Robert's head and insert the battery into the holder. Install the part into the robot's body cavity and reinstall the head. He is now ready to light up!
-
Irwin 'Man From Mars' Replacement Bubble Helmet A two piece bubble helmet for the Irwin 'Man From Mars' wind up toy from the 1950's. The helmet comes in two pieces as shown and installs just as the original. There are 4 alignment pins on one helmet half and 4 corresponding holes on the other half. A small bit of super glue to each pin will secure the helmet to the spaceman. There is a hole in the top of the helmet for the rubber antenna, which is also available here on this site. Many of the original bubbles are missing, cracked and re-glued or have become clouded or crazed from age. My new bubble is guaranteed to be an excellent fit and remain clear for years to come!
-
Irwin Man From Mars Replacement Antenna</p> This is an exact copy of the original Irwin Man From Mars Antenna and is molded in rubber. It will fit the original plastic helmet or our new replacement helmet, also sold here. The antenna should be softened in hot water prior to installing in an original, sealed helmet so as not to crack the plastic from too much stress. Just insert with a slight twisting motion. You could also add a drop of dish soap for lubrication to the antenna base to ease insertion. These parts are in stock and ready to ship.
-
A replacement hat brim for the Strauss Jenny The Balky Mule Wind Up Toy.
-
Kanto Space Patrol Friction version replica cannon expertly crafted for a perfect fit.
-
Lincoln Continental Hood Ornament Antenna Set A reproduction tin and metal hood ornament/antenna combination for the Linemar 1956 Lincoln Continental tin cars. These parts are compatible with all versions of the Linemar Lincoln battery operated friction and remote control. The company liked to ship these parts separately from the toy and as a result, these parts were often lost. I fabricate the reproduction hood ornament exactly as the original with a large tab on the bottom side. This feature allows the hood ornament to insert easily into the slot above the grill. The reproduction antenna is the same as the original diameter of the shaft and fits correctly into the hole in the fender. The car in the picture is for display purposes only and is not for sale. These parts are now made to order. Please allow two weeks for delivery.
-
Replacement Battery Cover for the Marusan Cadillac This listing is for a tin replacement battery box cover for the battery operated version of the Marusan Cadillac. The cover is often found missing from the Cadillac cars since the attachment is not permanent. As you can see, this new cover fits perfectly and looks great! A side by side comparison shows very slight differences between the two covers. My replacement has a larger piece of electrical board installed and the tongue latch is a bit longer for a better hold to the car. We prime the cover before finishing it with an automotive lacquer that matches the Marusan black color. The painted cover is then given a final polish. Just remove the cover from the packaging and install it on your car. Absolutely no disappointments with this part!
-
A wonderful 1953 Marusan Kosuge Cadillac friction toy in excellent, fully working condition. A must have for collectors and enthusiasts alike!
-
Marx Captain Space Solar Scout Rifle REPLACEMENT CLEAR LENS. Crystal clear and screws on just like the original. Listing is for the CLEAR LENS ONLY, gun shown for identification and clarity only. These are in stock and ready to ship.
-
Marx Hootin Hollow Haunted House Black CAT is a perfect reproduction of the original toy part. Many of these Marx houses are either missing the entire cat or the cat is missing the tail, which is quite fragile and prone to breakage. I take great care to cast the cat in black plastic and add paint for the yellow eyes and red tongue, just like the original! Marx Hootin' Hollow Haunted House first appeared on TV in the mid 1960's. The commercial features a spooky announcer and two children playing with and truly enjoying the houses many amazing features. The toy boasts a jumping cat, a witch behind the opening front door, a ghost floating in the air behind a lighted window, a scary window shade, a shaking roof with banging shutters, a skeleton that jumps out of the chimney, a spooky, eerie sound and a frightening loud whistling noise. All of these features are operated by buttons and 3 'D' cell batteries. We have other parts available for this toy: the witch behind the door, the skeleton in the chimney, the gray buttons, and the tin inner battery box.
-
Hootin Hollow Haunted House Button is a perfect reproduction of the original toy part. If your haunted house is missing any of the little buttons for operating the different house functions, your prayers are answered! We carefully color match our plastic to blend in our new buttons with your existing toy buttons. Marx Hootin Hollow Haunted House first appeared on TV in the mid 1960’s. The commercial features a spooky announcer and two children playing with and truly enjoying the houses many amazing features. The toy boasts a jumping cat, a witch behind the opening front door, a ghost floating in the air behind a lighted window, a scary window shade, a skeleton that jumps out of the chimney, a shaking roof with banging shutters, a spooky, eerie sound and a frightening loud whistling noise. All of these features operate by buttons and 3 ‘D’ cell batteries. Other parts we have available for this toy include the witch behind the door, the standing black cat, the jumping skeleton, the tin battery box door, the tin inner battery box and the tin rear house panel.
-
Hootin’ Hollow Haunted House Skeleton is a perfect reproduction of the original toy part. If your haunted house is missing the skeleton that’s jumping out of the chimney, your prayers are answered! Marx Hootin’ Hollow Haunted House first appeared on TV in the mid 1960’s. The commercial features a spooky announcer and two children playing with and truly enjoying the houses many amazing features. The toy boasts a jumping cat, a witch behind the opening front door, a ghost floating in the air behind a lighted window, a scary window shade, a shaking roof with banging shutters, a spooky, eerie sound and a frightening loud whistling noise. All of these features are operated by buttons and 3 ‘D’ cell batteries. Other parts we have available for this toy include the witch behind the door, the standing black cat, the tin battery box door, the tin inner battery box and the tin rear house panel.
-
Marx Hootin Hollow Haunted House Witch is a perfect reproduction of the original toy part. The replacement made from tin, decorated and mounts to the door just like original! Marx Hootin Hollow Haunted House can be seen in a mid 1960's TV commercial featuring a spooky announcer and two children playing with the house. The actions are triggered by pressing the buttons on the side. A jumping cat, a witch behind the opening front door, a ghost floating in the air behind a lighted window. A scary window shade, a shaking roof with banging shutters, a skeleton that jumps out of the chimney. A spooky, eerie sound and a frightening loud whistling noise. All of these features are operated with 3 'D' cell batteries.
-
A new replacement small driver for the Marx Race Cars requiring a smaller driver with a single mounting pin. The part is cast in the white color as shown. Please see my other listing offering the dual mounting pin driver. It is a bit larger and fits the larger race cars and roadsters. These replacement drivers are the nicest available and fit perfectly just as the originals.
-
Another NEW part from Uncle Al's Toys and available NO WHERE ELSE is this great replacement lens for the Marx or Halco flashlight pistols, Marx Space Patrol Atomic Flashlight Pistol, Halco Planet Patrol Flashlight Pistol and Rex Mars Planet Patrol Flashlight Pistol. Beautifully clear lens screws on just like the original and can be made in slightly tinted colors upon request. Uncle Al is also a specialist in repairing broken plastic ray guns!
-
A replacement cast metal propeller for the Mastercrafters Sessions Airplane Clock. Cast from a mold created of an original clock part and is a guaranteed fit for your clock. I cast these parts myself. All of the pictures you see here are of the new replacement part, not an original. The metal castings are filed, sanded and lightly polished. I decided not to plate the propeller as they looked quite appropriate in the lightly polished bare metal state. Protect the integrity and value of your clock by reinstalling a REAL METAL replacement propeller. This is a bare metal casting and is NOT plated.
-
A new replacement, metal tail wheel for the Master Crafters Sessions Wooden Airplane table clock. I made a mold of an original tail wheel, and I cast and finish these myself.
-
Reproduction Whistle for the Masudaya Sonicon Rocket. With a blow of the whistle, you control the direction of the rocket. Guaranteed to perform just like the original whistle!
Copyright © 2024 Uncle Al's Toys. All rights reserved.
Website design and developed by Concept Infoway LLC