-
New from Uncle Al's Toys! Horikawa Space Station replica Antenna Dish and Mast in Red or Silver Gray. Made exactly like the original this antenna dish and mast will fit perfectly should your Space Station be lacking. My tower (sold separately)also comes with the drive wheel and shaft. These dishes are used on both the red and blue versions of this toy.
-
Marx Dick Tracy Squad Car / Army Command Car / Fire Chief Car replacement siren light. This fabulous replacement light is exactly like the original and comes completely wired with socket and bulb. Just attach and install as original. The rear housing can also be molded in olive drab on request but standard in stock is yellow/red
-
Replacement front bumper cones for the rare Sensco Japan Future Car or the TV Space Patrol friction car. The TV Space Patrol Car cones come with the slight teal blue tint as original and the Future Car comes clear green tinted as original. Please specify which you need at the time you order. These cones are sold only in pairs for a perfect color match on your rare toy. TV Space Patrol Car tin mounting rings are sold separately.
-
This PLASTIC WING for the 1/10 scale battery operated Asahi Junior Toys Gold Leaf Lotus 49 Ford F-1 race car. The wing was created from a mold taken from an original toy part and is an exact copy of the original, perfect fitting and strong material. Many of these cars are missing this accessory and now there is this excellent replacement available from Uncle Al's Toys. Please note that this listing is for ONE WING ONLY - NO CAR. These parts are in stock and ready to ship!
-
This listing is for a new replacement engine cover for the Nomura R-10 VW Space Patrol Car or for the Nomura Piston Tractor. This clear engine cover may have been used on other Nomura toys that I'm unaware of. The part was created from a mold taken of an original toy part and is guaranteed a perfect fit and crystal clear. The toys pictured are used to clarify the part in this listing and are NOT INCLUDED or for sale.
-
Yonezawa X-5 Space Tank Replica Antennas - These replacement antennas are two-piece spring and plastic ball parts modeled after original toy parts and are a guaranteed fit. You get one red ball antenna and one blue ball antenna.
-
A clear replacement canopy for the K logo/Alps Space Fighter X-Y-105 space toy.</p>
-
Marx Hootin Hollow Haunted House Witch is a perfect reproduction of the original toy part. The replacement made from tin, decorated and mounts to the door just like original! Marx Hootin Hollow Haunted House can be seen in a mid 1960's TV commercial featuring a spooky announcer and two children playing with the house. The actions are triggered by pressing the buttons on the side. A jumping cat, a witch behind the opening front door, a ghost floating in the air behind a lighted window. A scary window shade, a shaking roof with banging shutters, a skeleton that jumps out of the chimney. A spooky, eerie sound and a frightening loud whistling noise. All of these features are operated with 3 'D' cell batteries.
-
The rare, Sensco 'TV Space Patrol Car' modeled after the famous Cadillac XP-74 concept car. Uncle Al's offers a beautiful replacement blue tinted canopy as well as the almost always missing baby blue bumperette cones. Only found here!
-
Kanto Space Patrol Friction version replica cannon expertly crafted for a perfect fit.
-
A replacement contact set for the Nomura Radar Robot Battery Box. The contact set includes the new brass contacts and mounting boards as shown. The Nomura Radar Robot face controller is not included. If your controller is still in good condition but the contacts are either broken or damaged from leaking batteries, this is your cure! These are made from the same materials and thicknesses as the originals and are guaranteed to be a perfect fit. No one else makes these and Uncle Al can re-create contacts and mounting boards for ANY vintage battery toy!
-
This is an item that I've needed to make for some time and finally have it ready for purchase. The Bandai Volkswagen Bus battery operated version has this delicate, rear opening door that is so often missing from these toys. I had a toy with a damaged original door that I was able to recreate in tin to look and function just as original. This new tin door comes as shown in white automotive primer for $95.00 USD and can be finish painted in either RED or CREAM IVORY as the two original toy color versions that were available for an additional $25.00. It also comes with the hinge pin for mounting the door to the vehicle. This is an absolute must have if your bus is missing its rear hatch door and it is available no where else!
-
Tin replacement battery box cover for the battery operated Yonezawa Electro Special 21 Racer. These are often missing from the 21 cars. The tooling for this cover was created from an original cover to ensure a perfect, factory fit. The cover is primed and finished in an automotive lacquer that matches the Yonezawa black color and then polished. Just remove from the package and install on your car. Absolutely no disappointments with this part! Other parts are available for this toy. The toy pictured is used to clarify the part in this listing and is not for sale.
-
A replacement tail fin for the Yoshiya SS Space Friction Rocket. It installs just as the original. The Replacement Tail Fin is a specific component designed for the restoration or repair of the Rocket toy.
-
Bandai Area Radiation Tester Replacement LIGHT POD, Right Hand RED is now finally available. These light pods were created from molds made of the original toy parts. The brass contacts for the light bulbs are hand made of the same thickness and configuration of the original parts. The same wattage bulbs are installed and colored as original. Ample wire is supplied and will be trimmed to length when you install. It should be noted that the pods are designed to be installed in the same fashion as the original parts. Some skill is required to open the tin pod pylons (not included - you must have the original pylons). The pods are secured to the pylon by brass eyelets with a minimum length of approximately 3/16". Once mounted, the wiring for each pod is trimmed to length and soldered to the pylon electrical mount pins. Be sure to apply electrical tape over the solder connections before reassembling the two pylon halves. The pods are also available as a set for a discounted rate of $250.00.
-
This is a replacement WIND UP KEY for the CIJ Alfa P2 Racer , made in France. All dimensions for the replacement were taken from an original key. The brass shaft diameter and the steel winding handle are of the same thickness as the original key. The length is correct and allows winding without interference or binding near the back wheel of the toy. If you look closely at the pictures, I also drilled and inserted a brass locking pin which secures the handle to the shaft, just as original. These can be ordered with black painted steel winding handle or aged patina. Please specify when ordering. These are in stock in both variations shown here. Make your Alfa complete with one of these rare keys.
-
This is a replacement head for the 1939 Ideal Novelty and Toy Company, Superman composition toy/doll figure. This is the first known Superman toy and they are extremely rare and in high demand. This replacement head was created from a mold made of an original head. This resin cast replacement comes with a metal loop inside, just as original, so that it will accept the spring and metal hook that comprise the flexible joints of the legs. Please allow 14 days from the time of ordering and purchase as these are made to order.
-
This is a real, metal replacement battery box for the Cragstan Mr. Robot toy. It comes complete with the contact boards with new contacts and installs exactly like the original.
-
Bandai Area Radiation Tester Replacement LIGHT PODS, L&R Set of two lights are now finally available. These light pods were created from molds made of the original toy parts. The brass contacts for the light bulbs are hand made of the same thickness and configuration of the original parts. The same wattage bulbs are installed and colored as original. Ample wire is supplied and will be trimmed to length when you install. It should be noted that the pods are designed to be installed in the same fashion as the original parts. Some skill is required to open the tin pod pylons (not included - you must have the original pylons). The pods are secured to the pylon by brass eyelets with a minimum length of approximately 3/16". Once mounted, the wiring for each pod is trimmed to length and soldered to the pylon electrical mount pins. Be sure to apply electrical tape over the solder connections before reassembling the two pylon halves. The pods are also available separately for $135.00 each. A discount savings is applied when buying the set of two and is reflected in this price of $250.00.
-
Made exactly like the original, this tin tower will fit perfectly should your Space Station be lacking. My tower also comes with the drive wheel and shaft for the large plastic antenna dish. (sold separately) This tower is used on both the red and blue versions of this toy.
-
Only available through Uncle Al's Toys is the 100% complete and brand new remote control for the Marx Hi-Bouncer Moon Scout Robot toy. All parts are created exactly like the original and these are made to order and take about 2 weeks to complete. Please note that my pictures show my replacement in a different color than the original light blue. This is only to show you that this is for real! Your remote will be molded in the same light blue as original and orientation of colored control buttons will also be the same as original. As far as I know, Hi- Bouncer is the only toy to ever use this style remote, making it an absolute must have to complete your robot to original condition. Just add your own wire and you're ready to go!
-
Ichiko Space Patrol Car Astronaut Driver Head - This is a replacement replica tin head for the Ichiko Space Patrol Car. I fabricated my first one of these from pictures of the original. They are comprised of four pieces, front and rear of the helmet, inside face and outer earmuffs and strap. I have since acquired an original head and have created new tooling so that my replacement head is now near perfect! I also replicate the windshields and frames for this toy which run $175.00. These take about 4 weeks to complete from the time of order.
-
Beautiful Bandai BMW Isetta friction powered vehicle in excellent original condition. Friction motor is sound and firm as new and the toy features a realistic opening front end to enter the vehicle.
-
Available ONLY through Uncle Al's Toys is this ALL TIN replica robot driver head for the rare 'Y' Company Space Patrol Car. This head was created from photographs of the auction car from the Griffith's Auction of 2000. Only two tabs held the original head to the toy, which is probably why so many heads were lost. Also available for this car are replacement hub caps and tinted windshield!
-
Kanto Battery Operated Space Patrol - Replica Tower and Radar Dish, available ONLY through Uncle Al! - You won't find a more accurate, perfect fitting replica tower anywhere else. An outstanding original was borrowed for reference in the dimensioning, fit and color of this replica and it installs just as the original - an easy installation that you can do yourself with my instructions. The Kanto Space Patrol vehicle is one of the most highly sought after space toy collectibles and many times is missing this critical detail part. My re-creation is made exactly like the original 10 piece part. It comes painted in the correct colors and installs in minutes. This part is hand made to order, so please allow a minimum of two weeks for assembly prior to shipping. Another fine part available nowhere else!
-
Just like the original, this fin is faithfully recreated in tin. To make each half of the fin shape, custom stamping dies were created from an original Atom Jet fin. The halves are hand-assembled, and each new fin is then pre-fitted to an original toy ensuring accuracy and a perfect fit. We complete the fin with paint colors matching as close as possible to the original colors. The results are undeniable and sure to please. Installation is a breeze because the fin snaps easily into place like the original. *WE MAKE EACH FIN TO ORDER, SO PLEASE ALLOW EIGHT WEEKS FOR COMPLETION.*
-
Masudaya 'Queen Of The Sea' battery operated ocean liner in excellent working original condition. The Queen requires 3 'D' cell batteries for operation and features Bump N Go action, loud ships horn, red and green flashing lights and spinning radar antenna. The antenna and metal ship's flag are Uncle Al's reproductions. There is some very minor rust damage near the battery compartment but not inside. Awesome toy nearly 24" long.
-
Beautiful vintage 1950's Japan Masudaya 'Space Giant' flying saucer battery operated toy in tremendous condition. This large (12") diameter toy requires 3 'D' cell batteries and features Bump n' Go action, eerie whistling sound and flashing alternating lights on the deck as well as tail fins. A very nice, rare collectible spaceship!
-
Without a doubt, one of the RAREST and coolest space toys ever made. 1960's Bandai Sears Radiation Tester Exclusive Area battery operated toy in nice working condition. This toy was available ONLY through Sears and could be found in their 1961 catalog. It operates on two 'D'cell batteries and features Bump N Go action, opening rear bay doors, a smoky fog emits while the radiation tester unfolds and lifts out of the bay. The arm retracts back into the bay and the doors close and the toy is on it's way again. During the entire cycle, the light pods in the rear flash red and green intermittently and are very bright. This early Japanese tin toy is a highly sought after space toy example and is sure to please. As can be seen in the pictures, the toy is in working condition and shows playwear and no paint touch ups. The battery compartment is very clean. This is a sizable toy stretching 21 inches in length, 5 inches wide and nearly 6 inches tall to the top of the antenna. Uncle Al's Toys is the only maker and provider of replacement parts for this toy. Both toys available here have replacement light pods, large antenna and front sight. Also included but not shown is a wonderful, first quality reproduction box, also available nowhere else! A great old vintage battery operated space toy that makes an outstanding functioning shelf piece display. This is not one to miss!
Copyright © 2024 Uncle Al's Toys. All rights reserved.
Website design and developed by Concept Infoway LLC