-
Here we have a new RED replacement jet cone for your Nomura (TN) Japan 3 Stage Rocket. The pins on the original toy cones were very easily broken due to their outside location on the main body of the rocket. This toy REALLY moves when in operation and it's understandable why these fragile parts would break. The installation of these parts is not for the inexperienced individual. There are tiny light bulbs (not included) on very short wires that mount to the back of the cones and great care must be taken when removing the old cones. This is the ONLY source for this toy part and it is a perfect replacement!
-
A wonderful Marusan, Japan Sunbeam Motorcycle with Sidecar battery-operated toy in excellent, fully working condition. The Sunbeam operates with two 'D' cell batteries inserted into the sidecar. The sidecar switch operates the headlight, red license plate, taillight and the front running light. Upon battery insertion and without operating the light switch, power is instantly available to the electric motor to power the bike. The bike operates by switch movement on the gas tank. First gear is slow speed, second gear for higher speed and neutral or 'off'. The front fork is steerable and can be positioned for straight or circular motoring direction. These were very sensitive and fragile toys and most became shelf displays due to mishandling. This toy has been thoroughly checked and adjusted for superior function. Truly a delight and a must have for motorcycle collectors and enthusiasts alike!
-
A replica hand crank for the 1950's Ideal Atomic Machine Gun. Created from a mold taken of an original toy part, it is stronger than original because I solid cast the square end that fits into the gun. I also solid cast the pin for turning the crank. The fit is tested on my own toy to ensure accuracy. I still resin cast my part but I designed it to be solid with the exterior look of the original. Please ask if you're looking for or need custom parts!
-
This is a replacement head for the 1939 Ideal Novelty and Toy Company, Superman composition toy/doll figure. This is the first known Superman toy and they are extremely rare and in high demand. This replacement head was created from a mold made of an original head. This resin cast replacement comes with a metal loop inside, just as original, so that it will accept the spring and metal hook that comprise the flexible joints of the legs. Please allow 14 days from the time of ordering and purchase as these are made to order.
-
Marx Hootin Hollow Haunted House Black CAT is a perfect reproduction of the original toy part. Many of these Marx houses are either missing the entire cat or the cat is missing the tail, which is quite fragile and prone to breakage. I take great care to cast the cat in black plastic and add paint for the yellow eyes and red tongue, just like the original! Marx Hootin' Hollow Haunted House first appeared on TV in the mid 1960's. The commercial features a spooky announcer and two children playing with and truly enjoying the houses many amazing features. The toy boasts a jumping cat, a witch behind the opening front door, a ghost floating in the air behind a lighted window, a scary window shade, a shaking roof with banging shutters, a skeleton that jumps out of the chimney, a spooky, eerie sound and a frightening loud whistling noise. All of these features are operated by buttons and 3 'D' cell batteries. We have other parts available for this toy: the witch behind the door, the skeleton in the chimney, the gray buttons, and the tin inner battery box.
-
TN Nomura Astronaut Helmet. A replacement astronaut helmet for the battery-operated Nomura Moon Patrol Space Division #3 or the Mobile Space TV Unit with Trailer. Created from a mold taken of the original toy part to guarantee a perfect fit. The helmet includes both a red and yellow cone. The red cone is correct for the Mobile Space TV Unit with Trailer and the yellow cone is correct for the Nomura Moon Patrol.
-
Old Fashioned Double Decker Bus by Modern Toys The Old Fashioned Double Decker Bus by Modern Toys of Japan is a wonderful, large size battery operated tin bus that is new in its original box. The toy is complete with box inserts. It operates on 2 'D' cell batteries (not included) and features bump n go action. This is a beautiful mint condition toy fresh from my personal collection and is sure to please! The Double Decker Bus is a wonderful example of the standard mode of transportation of the early 20th century. The Double Decker Bus was and still is commonly used for tourism in America as well as Europe. This toy bus has many features such as mystery action, sounding horn and engine sound and funny shaking action as it rolls on its journey. This marvelous toy has never been out of the box and never seen a battery since the factory. As good as these toys get!
-
A reproduction metal cast anchor which fits the early 1900’s Large Marklin battleships. This anchor will fit the Battleship New York, Columbia and several others. Available in painted (black) or unpainted condition. I had the pleasure of performing some intricate repairs on a Columbia Battleship. Part of the Malcolm Forbes Collection and acquired at auction by The Dallas Elite Toy Museum. Other custom parts are available upon request.
-
This is a Bandai 1959 Cadillac tin friction car in excellent original condition. The toy has very minor scuffing (possibly box rub) and is virtually un-played with. The tire treads are crisp and the friction is very strong. This toy has been in my personal collection for several years. This would be a beautiful addition to any tin toy car collectors fleet.
-
Bandai Area Radiation Tester Replacement LIGHT POD, Left Hand GREEN is now finally available. These light pods were created from molds made of the original toy parts. The brass contacts for the light bulbs are hand made of the same thickness and configuration of the original parts. The same wattage bulbs are installed and colored as original. Ample wire is supplied and will be trimmed to length when you install. It should be noted that the pods are designed to be installed in the same fashion as the original parts. Some skill is required to open the tin pod pylons (not included - you must have the original pylons). The pods are secured to the pylon by brass eyelets with a minimum length of approximately 3/16". Once mounted, the wiring for each pod is trimmed to length and soldered to the pylon electrical mount pins. Be sure to apply electrical tape over the solder connections before reassembling the two pylon halves. The pods are also available as a set for a discounted rate of $250.00.
-
Bandai Area Radiation Tester Replacement LIGHT POD, Right Hand RED is now finally available. These light pods were created from molds made of the original toy parts. The brass contacts for the light bulbs are hand made of the same thickness and configuration of the original parts. The same wattage bulbs are installed and colored as original. Ample wire is supplied and will be trimmed to length when you install. It should be noted that the pods are designed to be installed in the same fashion as the original parts. Some skill is required to open the tin pod pylons (not included - you must have the original pylons). The pods are secured to the pylon by brass eyelets with a minimum length of approximately 3/16". Once mounted, the wiring for each pod is trimmed to length and soldered to the pylon electrical mount pins. Be sure to apply electrical tape over the solder connections before reassembling the two pylon halves. The pods are also available as a set for a discounted rate of $250.00.
-
Bandai Area Radiation Tester Replacement LIGHT PODS, L&R Set of two lights are now finally available. These light pods were created from molds made of the original toy parts. The brass contacts for the light bulbs are hand made of the same thickness and configuration of the original parts. The same wattage bulbs are installed and colored as original. Ample wire is supplied and will be trimmed to length when you install. It should be noted that the pods are designed to be installed in the same fashion as the original parts. Some skill is required to open the tin pod pylons (not included - you must have the original pylons). The pods are secured to the pylon by brass eyelets with a minimum length of approximately 3/16". Once mounted, the wiring for each pod is trimmed to length and soldered to the pylon electrical mount pins. Be sure to apply electrical tape over the solder connections before reassembling the two pylon halves. The pods are also available separately for $135.00 each. A discount savings is applied when buying the set of two and is reflected in this price of $250.00.
-
Comet Monorail Battery Operated Toy, TN Nomura Japan is in excellent working condition. This toy comes complete with metal track and the original box. The Monorail car operates on 'D' cell batteries. It features forward and reverse action and has red and green lights which correspond with the movement. The track layout is approximately 20" by 30". The Monorail car is suspended by the metal uprights and wire track that snap together to form the layout. The litho is bright and crisp and shows very light playwear overall. This toy was produced in the 1950's in Japan due in part to the popularity of the Disneyland Theme Park Monorail in California. It can be played with or used as an attractive display piece.
-
Bandai Area Radiation Tester Replacement RADAR DISH is a 3 piece part. The dish has a plastic backing, center plastic mount and a metal reflector. It attaches to the toy exactly as the original with holes for the mounting pin and extension arm. More parts are available for this toy.
-
This is a replacement front sight for the 1960's Sears Exclusive Bandai Area Radiation Tester. This part was cast from a mold of an original toy part and installs to the toy as original. Simply insert the end into the toy with a little adhesive and press into place. Many other parts are available for this toy.
-
This is a wonderful Alps 'Auto Doggie' Mustang convertible battery operated car, made in Japan. The toy is a 'Bump N' Go multi directional mover. Auto Doggie is in excellent working condition with the original driver and a replacement dog. (The other dog ran away . . .) When the toy is in play, the car moves about the room and the doggie barks and makes a jumping movement in the passenger seat. It's a large toy measuring 14" long and 5" wide. It is in excellent working condition and is always in a glass cabinet on display in my collection.
-
Add a splash of color to your bike with the new BIG CHIEF bicycle accessory light set! The 308 stainless steel mounting stem needs no extra care and secures easily to the bicycle/s axel utilizing the wheel mounting nut, front or rear. The light has a 36†wire lead that attaches to a 'positive' battery lead and the mounting stem acts as the system ground. These units attach to original tank bike lights or dynamo light systems. Future editions will be available as LED wireless installation. The Big Chief bike light is available in red or blue with more colors to be added soon. It is currently sold in pairs with FREE SHIPPING (lower 48 only). Made in the USA!
-
The BIG CHIEF DELUXE bicycle light is hand painted in brilliant, vibrant multicolor. The 308 stainless steel mounting stem needs no extra care and secures easily to the bicycle's axel utilizing the wheel mounting nut, front or rear. The light has a 36" wire lead that attaches to a 'positive' battery lead and the mounting stem acts as the system ground. The lights to attach to both original tank bike lighting or dynamo light systems. Future editions of light pairs will be available as LED wireless installation. Coming soon, Uncle Al's Toys will introduce another version of the Big Chief light for your fender.
-
A reproduction metal cast canon barrel for the early 1900's Large Marklin battleships. The barrel will fit other battleships, like the Battleship New York and the Columbia. My cast barrels pick up all of the fine details of the original. I individually drill each barrel center to the correct inner diameter and add a tiny breach hole at the rear. The barrel measures 2" long. A barrel comes in a patina condition to reflect the condition of your toy, or it can be patinated as new for completely restored toy boats. I had the pleasure of performing intricate repairs on a Columbia Battleship from the Malcolm Forbes Collection. Other custom parts are available upon request.
-
Here we have a beautiful Bluebird National Park Excursion Bus by Daiya of Japan. This very nice size bus is 14"long, 4 1/2" wide and approximately 4" tall. It has friction drive with sound and is all tin construction with celluloid windshield and rear window. An extremely nice condition and rare bus toy to add to your transportation collection.
-
flexible, plastic propeller for the battery-operated Cragstan or Yonezawa DC-7 aircraft toy. Created from a mold of an original toy part to guarantee a perfect fit. The replacement prop is a bit more flexible than the original material. The wings must be disassembled in order to correctly install the propeller. Parts are available for other versions of the DC-7. The square tip propeller, the translucent red beacon lenses, white radar antennas and the translucent red engine covers.
-
A new flexible plastic square tip propeller for the Cragstan or Yonezawa battery operated DC-7c aircraft toys. The perfect solution to those old broken or glue covered propellers. Our new prop is a bit more flexible than the original. Please note the wings must be disassembled in order to correctly install these propellers.
-
Very nice Schylling Collectors Series Thunder Robot in his original box is ready for action! This beautiful RED Thunder Robot is highly sought after. Batteries have been installed and the toy was hand tested for function and then promptly returned to the original packaging. Thunder Robot walks across the Earth with his antenna spinning and raises his gun arms to fire his lasers. He works great and looks even greater when functioning! The red color is rare and highly desirable. It looks fantastic in the box, on your shelf or in you collectibles cabinet! Very impressive to see in full operation!
-
This is the I.W.G. Rocket Ship, Rocket World, Green Version in Box. It is an extremely fun sort of 'steam punky' rocket ship with a light up cockpit and crazy animal figure. I know there is a whole back story to the Stange Co. Rocket World toy offerings in this series but the large rocket ships really got to me! These are VERY hard to come by now and go for a premium price when you can find them. This toy comes complete with the inserts and original box. The gun fell out of the blister insert during the photo shoot but it's there.
Copyright © 2024 Uncle Al's Toys. All rights reserved.
Website design and developed by Concept Infoway LLC