-
A 1957 Tonka Rescue Squad No 5 Fire Dept Metro Van, a favorite of Tonka collectors. The pressed steel van is in original condition and shows moderate playwear. The Rescue Metro Van is also part of the 3-piece Tonka B-212 Fire Rescue Set that was also available in 1957. This toy has reproduction door handles in the rear and new headlights. Add this beautiful piece to your pressed steel collection today! Discover the Best Vintage Toys Online Find the Best Vintage Toys from Various Product Categories Best Selling Toys | Action Figure Toys | Antique Toy Parts | Battery Operated Toys | Custom Toys | Diecast Toys | Dinosaur Toys | Holiday Toys & Decorations | Original Toy Parts | Other Toys & Antiques | Remote Control Toys | Space Toys | Toy Banks | Toy Car | Toy Guns | Toy Model Kits | Toy Replacement Parts | Toy Robots | Transportation Toys | Wind Up Toys Join us on social media. Facebook | Instagram | LinkedIn | Twitter
-
A replica cap compartment cover for the 1950's Ideal Atomic Machine Gun. This cap is near perfect and almost a dead ringer for the often missing plug. The fit is tested on my own toy and an original stack of 5 Kilgore Roll Caps (not included) is inserted and then capped. I believe the original cap was a hollow injection molded part and quite flimsy, which is why they're almost always missing. I still resin cast my part but I designed it to be solid with the exterior look of the original. Please ask if you're looking for or need custom parts!
-
Bandai Rolls Royce Silver Cloud 'Flying Lady' hood ornament replica, faithfully reproduced to fit exactly like the original installation. I cast my replica from an original ornament. Unlike the replacements offered by my competitors, my 'Flying Lady' still has her head . . . *PLEASE NOTE* You may have to disassemble the toy in order to install this part, depending on whether or not the original emblem was pulled completely out or snapped off. If a piece is still showing on the top of the radiator shell, you can carefully trim the emblem base with an exacto knife and push the remainder of the shaft through the hole. The new ornament can be glued in place rather than opening the toy. These are in stock and ready to go!
-
Marx Captain Space Solar Scout Rifle REPLACEMENT CLEAR LENS. Crystal clear and screws on just like the original. Listing is for the CLEAR LENS ONLY, gun shown for identification and clarity only. These are in stock and ready to ship.
-
Pyro X-300 Space Cruiser rocket ship clear replacement nose cone, crystal clear and easily snaps in place like the original. Other parts are available for this toy as well as the Pyro X-400.
-
Tippco 1930's Mercedes Fuhrerwagen Staff Car Replacement Hood Ornament created from an original piece and made of cast metal. Installs just like the as original.
-
Yonezawa Cragstan DC-7, Automatic Multi-Action Prop-Jet Plane, replacement ANTENNA, fits the large scale battery operated prop planes by Yonezawa, American Airlines DC-7, United Airlines DC-7, TWA Airlines DC-7, Northwest Airlines DC-7, Eastern Airlines DC-7. This high quality replacement part is created from a mold of an original toy part to ensure the greatest accuracy. A drop of super glue will hold it in place and is guaranteed to be a perfect fit! As this toy was manufactured with many different features and airline names, we offer a wide variety of additional replacement parts. Common to all the planes is the red beacon lens listed separately here in the toy parts category. Also available are the white propellers ( round tip and square tip), and red nacelle engine covers.
-
This is a replacement ASTRONAUT PILOT FIGURE that fits in both the Pyro X-300 and X-400 rocket spaceships from the 1950's. The figure has a little button on the bottom that fits into the mounting hole of the toy. It is glued into place as original. You may have to remove old plastic from the mount hole to secure properly. The X-300 require one figure while the X-400 requires two figures.
-
This listing is for a reproduction of an early German (1953 - 1970) dash mounted mileage counter. These were quite often used with early Volkswagens and other European vehicles that didn't have gas gauges. I make these from a mold taken from an original disassembled counter. The original counter had a white counter shroud with black base and number wheels featuring white numbers.
-
Yonezawa Champions Racer Replica Box, Agajanian This is a brand new, high grade replica box for the large Champions Racer #98 car or the Agajanian Racer of the same size. A good friend lent me his pristine original box to take dimensions and photograph the image. As you can see, the artwork is flawless and crisp. I added a bit of distress to this example so that it would look more age appropriate to the car. (Car is NOT included and is NOT available for sale at this time. It is shown for clarity and to demonstrate fit inside the new box.) Much attention to detail was employed in the creation of this replica, such as the exact box dimensions, folded seam lines for all panels, the return legs for stapling, the correct image size, border reveal and so much more. The last 4 images are of a straight forward crisp box with now additional detailing or aging. I'll be happy to age and distress upon request. As you can see in my photos, the box looks fabulous when displayed with the Champions Racer.(not included) And because the box fits the car perfectly, it's an excellent bit of protection for moving or storage. Even if you don't have the car, the box is an excellent display piece! Very few original boxes exist and seldom show up for sale. When they do show up, they're almost as costly as the cars themselves. I only have a few of these fine reproductions available so don't hesitate. You won't be disappointed!
-
Irwin Man From Mars Replacement Antenna</p> This is an exact copy of the original Irwin Man From Mars Antenna and is molded in rubber. It will fit the original plastic helmet or our new replacement helmet, also sold here. The antenna should be softened in hot water prior to installing in an original, sealed helmet so as not to crack the plastic from too much stress. Just insert with a slight twisting motion. You could also add a drop of dish soap for lubrication to the antenna base to ease insertion. These parts are in stock and ready to ship.
-
Lindberg the Civil War, Union Horse-drawn Field Artillery kit. This is a reissue plastic model kit in sealed, new condition. I am the original purchaser of these kits and I only have SIX available so don't hesitate as they never last long. I purchased these kits 11 years ago and just cracked the case seal for these pictures. The second case of 3 kits is still sealed. These models have never seen a temperature above 68 degrees so I know they are crisp and perfect.
-
Reproduction Sonic Whistle for the Sonic Car Dodge Charger. Movement and direction are performed by blowing the whistle. With each blow of the sonic whistle, the dodge charger will move forward, in reverse, make left or right turns, or propel the machine guns out of the roof of the car with bright flashing muzzle fire. Guaranteed to perform just like the original sonic whistle! The pictures of the clear blue whistle were taken to show the detail more clearly. Whistle colors may vary.
-
Replacement tires for the 1950's Yonezawa Atom Jet Racer. Tires are an exact copy of the originals.The toy pictured is used to clarify the new parts in this listing and is NOT INCLUDED or for sale.
-
Yanoman Space Scout S-17 Space Toy replacement metal antenna.
-
A vintage 1967 Corgi Comics Popeye Paddle Wagon with a reproduction box made in England. In excellent condition. A beautiful toy for Popeye collectors!
-
A GuiLoy Indian Scout 1920 Motorcycle 1/6 Scale Die-Cast Metal Model by Hendee Manufacturing Company. New in the box. The box shows some storage wear.
-
Lindberg Power Drive Unit R/C Twin Engine Drive System for Boats. A plug-in electric system designed for Lindberg R/C Boats and other boats of similar size. This system is designed to be used with Lindbergs 30" Chris Craft Constellation, the 30" Chris Craft Sportfisherman, the JFK PT-109 1/32 scale and the Blue Devil Destroyer. I installed one of these kits in a Chris Craft Constellation and the power is extremely impressive. It is also an extremely simple installation with very straight forward instructions. When first offered, these kits retailed for $135.00 in most hobby stores. They are exceedingly rare to find in new condition.
-
A new, unopened FAO Schwarz Sweet Rocket Candy Dispenser in the very desirable TEAL color. The candy dispenser operates with 4 AA batteries and works by motion sensor. A simple wave under the chute delivers your favorite candy. The package lists item recommendations. The class rocket design and beautiful retro teal color makes this candy dispenser a winner. Perfect for game rooms, bars or space toy collectors. Get it while you can! We purchased the last remaining stock from FAO Schwartz and they're really taking off!
-
A new replacement small driver for the Marx Race Cars requiring a smaller driver with a single mounting pin. The part is cast in the white color as shown. Please see my other listing offering the dual mounting pin driver. It is a bit larger and fits the larger race cars and roadsters. These replacement drivers are the nicest available and fit perfectly just as the originals.
-
Marx Hootin Hollow Haunted House Witch is a perfect reproduction of the original toy part. The replacement made from tin, decorated and mounts to the door just like original! Marx Hootin Hollow Haunted House can be seen in a mid 1960's TV commercial featuring a spooky announcer and two children playing with the house. The actions are triggered by pressing the buttons on the side. A jumping cat, a witch behind the opening front door, a ghost floating in the air behind a lighted window. A scary window shade, a shaking roof with banging shutters, a skeleton that jumps out of the chimney. A spooky, eerie sound and a frightening loud whistling noise. All of these features are operated with 3 'D' cell batteries.
-
The REPLACEMENT GEAR COVER for the Asahi Toy, Junior Products Lotus 49 F-1 battery-operated race car. Created from a mold taken of the original toy part, it is guaranteed to be a perfect fit. It is possible for tiny bubbles to appear in the casting, as shown in the pictures. This was my first cast part and more recent casts have been bubble-free. The gear cover can be installed on the two different engine versions of the Lotus toy. Plated engines used on the wing cars have molded bosses to mount the wing. This version utilizes the tiny mounting pins on the clear gear cover. Engines without plating are for the non-wing cars and the clear gear cover is installed with the pins removed as the engine has no holes for the pins to go into. The pins can be easily trimmed off for a flush fit. Both versions require the cover to be glued on and just a drop of super glue to each pin area is sufficient.
-
A replacement Injection Cover for the Asahi Toy, Junior Products Lotus 49 F-1 battery-operated race car. Created from a mold taken of the original toy part, it is guaranteed to be a perfect fit.
-
XM-12 Moon Rocket - Yonezawa - Replacement Cockpit Canopy - Perfect fit replacement, orange color molded just like original! You get one switch ball exactly as shown. The ball can be glued onto the switch with super glue to hold it fast. Our switch ball was created from a mold taken of an excellent condition original part in order to provide you the finest nearly exact copy available. We also offer other parts for this toy and are experts in it's repair and restoration. We will be offering replacement snap on tin fins and the twist on rear plated exhaust with light in the very near future!
Copyright © 2024 Uncle Al's Toys. All rights reserved.
Website design and developed by Concept Infoway LLC