Questions? Call Us : (630) 254-1458

July 1, 2022

Shop

  • Mr. Christmas Ornament Santa's Lighted Animated Tree Top for your Christmas Tree. Made in 1994, this novel ornament is part of the Mr. Christmas Mechanical Collectibles. Plug it in and watch Santa turn and wave his lighted lantern. Quality construction and in good working condition. Removed from the box for testing purposes only. This is new and unused.
  • Jupiter 2 Lost in Space Model Kit 1/35 Scale Sealed Moebius Models 2018. Assembled kit is 18 inches in diameter.
  • Yonezawa USAF F100 FW 707 Tin Jet Plane Yonezawa F-100 Super Sabre 707, friction powered jet offered separately here and at one time, together with the Yonezawa Jet Plane Base. The plane has the special retainers for locking into the Jet Plane Base, located directly below the main wings. Excellent condition!
  • 1930's Wyandotte Boat Tail Racer with Lights in excellent original condition with replacement lights and tires that have been patina aged to match the condition of the racer. The paint has original luster and moderate overall patina. The racer is missing the headlight bar and sold in as-is condition.
  • Another wonderful friction car is the Bandai Rolls Royce Silver Cloud Convertible. This beautiful convertible is in excellent, fully working condition. A must have for collectors and enthusiasts alike!
  • This listing is for a reproduction of an early German (1953 - 1970) dash mounted mileage counter. These were quite often used with early Volkswagens and other European vehicles that didn't have gas gauges. I make these from a mold taken from an original disassembled counter. The original counter had a white counter shroud with black base and number wheels featuring white numbers.
  • This is a replacement WIND UP KEY for the CIJ Alfa P2 Racer , made in France. All dimensions for the replacement were taken from an original key. The brass shaft diameter and the steel winding handle are of the same thickness as the original key. The length is correct and allows winding without interference or binding near the back wheel of the toy. If you look closely at the pictures, I also drilled and inserted a brass locking pin which secures the handle to the shaft, just as original. These can be ordered with black painted steel winding handle or aged patina. Please specify when ordering. These are in stock in both variations shown here. Make your Alfa complete with one of these rare keys.
  • Bandai Area Radiation Tester Replacement LIGHT POD, Left Hand GREEN is now finally available. These light pods were created from molds made of the original toy parts. The brass contacts for the light bulbs are hand made of the same thickness and configuration of the original parts. The same wattage bulbs are installed and colored as original. Ample wire is supplied and will be trimmed to length when you install. It should be noted that the pods are designed to be installed in the same fashion as the original parts. Some skill is required to open the tin pod pylons (not included - you must have the original pylons). The pods are secured to the pylon by brass eyelets with a minimum length of approximately 3/16". Once mounted, the wiring for each pod is trimmed to length and soldered to the pylon electrical mount pins. Be sure to apply electrical tape over the solder connections before reassembling the two pylon halves. The pods are also available as a set for a discounted rate of $250.00.
  • Bandai Area Radiation Tester Replacement LIGHT POD, Right Hand RED is now finally available. These light pods were created from molds made of the original toy parts. The brass contacts for the light bulbs are hand made of the same thickness and configuration of the original parts. The same wattage bulbs are installed and colored as original. Ample wire is supplied and will be trimmed to length when you install. It should be noted that the pods are designed to be installed in the same fashion as the original parts. Some skill is required to open the tin pod pylons (not included - you must have the original pylons). The pods are secured to the pylon by brass eyelets with a minimum length of approximately 3/16". Once mounted, the wiring for each pod is trimmed to length and soldered to the pylon electrical mount pins. Be sure to apply electrical tape over the solder connections before reassembling the two pylon halves. The pods are also available as a set for a discounted rate of $250.00.
  • Add a splash of color to your bike with the new BIG CHIEF bicycle accessory light set! The 308 stainless steel mounting stem needs no extra care and secures easily to the bicycle/s axel utilizing the wheel mounting nut, front or rear. The light has a 36” wire lead that attaches to a 'positive' battery lead and the mounting stem acts as the system ground. These units attach to original tank bike lights or dynamo light systems. Future editions will be available as LED wireless installation. The Big Chief bike light is available in red or blue with more colors to be added soon. It is currently sold in pairs with FREE SHIPPING (lower 48 only). Made in the USA!
  • Unassembled 1/20 scale vintage METAL model kit. These kits are a true delight to build. The modeler should possess intermediate model building skills and will need tools such as miniature drill bits and jewelers files, as well as a small flat blade screwdriver for assembly. Paints and adhesives are also necessary.
  • A 1960's Marx Bristol 188 XF926 Jet Aeroplane. A very clean battery-operated toy in excellent working condition. The Bristol 188 XF-926 Jet airplane was made in Japan and was modeled after an experimental aircraft designed by and made by the Bristol Aircraft Company in the 1950's. The toy engines "power up" and light up one after the other. The jet then taxis along for a short distance, stops and repeats. One of the many Marx battery operated fighting jets in amazing condition!

Go to Top