-
Santa & Friends action figures from the Holiday TV classic "Rudolph the Red-Nosed Reindeer and the Island of Misfit Toys". This exceptionally well-made set from the Memory Lane collection is from my wife's personal holiday collection. The package is open but complete with all of the accessories. The set includes Mrs. Claus, Skinny Santa, baby Rudolph & Foreman Elf. This set originally sold in 2002 by Playing Mantis. Remember to check out the shop for our other Rudolph items.
-
This listing is for a new replacement engine cover for the Nomura R-10 VW Space Patrol Car or for the Nomura Piston Tractor. This clear engine cover may have been used on other Nomura toys that I'm unaware of. The part was created from a mold taken of an original toy part and is guaranteed a perfect fit and crystal clear. The toys pictured are used to clarify the part in this listing and are NOT INCLUDED or for sale.
-
Here is a nice set of replacement rubber grips for your Marusan Sunbeam motorcycle toy. These grips were reproduced from molds taken of original rubber grips and then re-cast in rubber for a perfect, tight fit and an exact reproduced part for authenticity. These will also fit the Bandai Meguro Motorcycle toys. Dramatically improve the look of your bikes if your grips are worn, old and split or just plain missing.
-
Hootin Hollow Haunted House Button is a perfect reproduction of the original toy part. If your haunted house is missing any of the little buttons for operating the different house functions, your prayers are answered! We carefully color match our plastic to blend in our new buttons with your existing toy buttons. Marx Hootin Hollow Haunted House first appeared on TV in the mid 1960’s. The commercial features a spooky announcer and two children playing with and truly enjoying the houses many amazing features. The toy boasts a jumping cat, a witch behind the opening front door, a ghost floating in the air behind a lighted window, a scary window shade, a skeleton that jumps out of the chimney, a shaking roof with banging shutters, a spooky, eerie sound and a frightening loud whistling noise. All of these features operate by buttons and 3 ‘D’ cell batteries. Other parts we have available for this toy include the witch behind the door, the standing black cat, the jumping skeleton, the tin battery box door, the tin inner battery box and the tin rear house panel.
-
Battery Box Marx Hootin Hollow Haunted House is a perfect fitting replacement tin part complete with battery contacts. Each battery box is test fit to an original toy rear panel to ensure an exact fitting installation. Just solder your wires and go! The battery contacts are slightly different than the original ONLY in that I have installed the flexible brass contact at both ends rather than the round stationary contact as original. The contact board is also gray vs. the original tan color. *Please note* You will see in one of the gallery pictures that I have installed 3 'D' Cell batteries in the new box. These are Heavy Duty batteries - NOT ALKALINE BATTERIES! Alkaline batteries did not exist at the time the haunted house and many other tin battery toys were made. Slightly dimensionally larger than the heavy duty batteries, it explains why so many vintage toys with either tin OR plastic battery boxes have damaged battery boxes. Always remember, NO ALKALINE BATTERIES IN ANTIQUE/VINTAGE TOYS! Marx Hootin’ Hollow Haunted House first appeared on TV in the mid 1960’s. The commercial features a spooky announcer and two children playing with and truly enjoying the houses many amazing features. The toy boasts a jumping cat, a witch behind the opening front door, a ghost floating in the air behind a lighted window, a scary window shade, a shaking roof with banging shutters, a spooky, eerie sound and a frightening loud whistling noise. All of these features are operated by buttons and 3 ‘D’ cell batteries. Other available parts we make for this toy include the witch behind the door, the standing black cat, and the gray plastic buttons. Please watch for the Marx Hootin’ Hollow Haunted House to appear in stock at Uncle Al’s Toys!
-
Hootin’ Hollow Haunted House Skeleton is a perfect reproduction of the original toy part. If your haunted house is missing the skeleton that’s jumping out of the chimney, your prayers are answered! Marx Hootin’ Hollow Haunted House first appeared on TV in the mid 1960’s. The commercial features a spooky announcer and two children playing with and truly enjoying the houses many amazing features. The toy boasts a jumping cat, a witch behind the opening front door, a ghost floating in the air behind a lighted window, a scary window shade, a shaking roof with banging shutters, a spooky, eerie sound and a frightening loud whistling noise. All of these features are operated by buttons and 3 ‘D’ cell batteries. Other parts we have available for this toy include the witch behind the door, the standing black cat, the tin battery box door, the tin inner battery box and the tin rear house panel.
-
Alps Lincoln Futura Metal Steering Wheel is an exact fitting replica of the original toy steering wheel. This part will fit all variations of the Alps Futura cars; friction, battery operated, and remote control. The replacement wheel mounts to the toy using the same tab/slot configuration and is easy to install. Also available for this toy are the rubber tires and the spring shaft deck antenna. The Alps Futura concept car is a stunning creation that is still popular today. Alps did a magnificent job of recreating this fine automobile in the tin.
-
Replacement Battery Cover for the Marusan Cadillac This listing is for a tin replacement battery box cover for the battery operated version of the Marusan Cadillac. The cover is often found missing from the Cadillac cars since the attachment is not permanent. As you can see, this new cover fits perfectly and looks great! A side by side comparison shows very slight differences between the two covers. My replacement has a larger piece of electrical board installed and the tongue latch is a bit longer for a better hold to the car. We prime the cover before finishing it with an automotive lacquer that matches the Marusan black color. The painted cover is then given a final polish. Just remove the cover from the packaging and install it on your car. Absolutely no disappointments with this part!
-
This listing is for a metal replacement battery cover door that fits the Nomura battery operated Robby Space Patrol, the Moon Car - Moon Patrol Space Division #3 and the Moon Space Ship. This replacement door is a hand worked, three piece reproduction of the original cover and each one is fitted to a toy to ensure proper fit and function. The bottom of the toy needs to be accessible in order to properly attach the cover. The hinges come pre-bent for proper insertion and care must be taken when installing. The reason so many of these toys end up with missing covers is primarily due to the fragile design of the hinges. Once the hinges are inserted into the 'L' slots (working from the inside of the toy), the hinge pins that are bent at 90 degrees are straightened with a plier to form a 'T' shape, effectively locking the door in place. I use a duck bill plier to flatten the hinge completely. If you are uncomfortable opening up the toy, the door hinges can be carefully inserted into the 'L' shaped slots and then closed and latched but please note that this should only be done if you don't intend to insert the batteries. The cover, when inserted this way is only being supported by one half of each hinge. The battery weight will put too much pressure on the hinge and could break the pins. As you can see in the pictures, I've inserted a door into the bottom of one of my toys to test the fit of the door when the latch is engaged. Each door I make is tested in this fashion to guarantee an excellent fit for your toy. Other parts are available for this toy and will be listed soon.
-
Produced by RC2 Collectibles in 2005, the 1971 Dodge Hemi Rod Shop Challenger SS/DA 1:18 scale diecast model car is part of the Supercar Collectibles series of custom, limited edition cars. This MOPAR diecast model is a true-to-scale replica of one of the cars owned by Gil Kirk's famous Rod Shop. The Rod Shop was a well known Speed Shop in the Columbus Ohio area. In 1971, Gil Kirk and Jim Thompson got together with Chrysler and formed an all Dodge race team. The scope of the team was considerable, participating in many of the sportsman classes and Pro Stock. The highly-detailed model features an opening doors, trunk, and hood, steerable front wheels, and a beautifully detailed interior and chassis. The dimensions of the car are approximately L-10.5, W-4, H-3 inches. The window box dimensions are L-13.75 x W-6.5 x H-5.75 inches. The car is still in its original packaging. Never displayed and the box only shows minor storage wear. A must have for true collectors!
-
The 1969 Pontiac GTO Restoration Alley diecast model car by MotorMax is a limited edition model of 1200 pieces. The highly-detailed model features opening doors and trunk, removable front hood, chrome accents, and posable front tires. The dimensions of the car are approximately L-11, W-4.5, H-3 inches. The window box dimensions are L-14 x W-6.5 x H-4.75 inches. The model is new in its original packaging with the plastic banding still around the model. The box shows minimal storage wear. A must have for true collectors!
-
Hot Wheels 1932 Ford Diecast Model Car, Deuces Wild, High Boy Street Rod, designed by Greg Padington and produced by Mattel in 2000. Brand new in the box with minimal shelf wear.
Copyright © 2024 Uncle Al's Toys. All rights reserved.
Website design and developed by Concept Infoway LLC