Product Categories in this Section
-
This listing is for a reproduction of an early German (1953 - 1970) dash mounted mileage counter. These were quite often used with early Volkswagens and other European vehicles that didn't have gas gauges. I make these from a mold taken from an original disassembled counter. The original counter had a white counter shroud with black base and number wheels featuring white numbers.
-
This is a replacement ASTRONAUT PILOT FIGURE that fits in both the Pyro X-300 and X-400 rocket spaceships from the 1950's. The figure has a little button on the bottom that fits into the mounting hole of the toy. It is glued into place as original. You may have to remove old plastic from the mount hole to secure properly. The X-300 require one figure while the X-400 requires two figures.
-
Yonezawa Cragstan DC-7, Automatic Multi-Action Prop-Jet Plane, replacement ANTENNA, fits the large scale battery operated prop planes by Yonezawa, American Airlines DC-7, United Airlines DC-7, TWA Airlines DC-7, Northwest Airlines DC-7, Eastern Airlines DC-7. This high quality replacement part is created from a mold of an original toy part to ensure the greatest accuracy. A drop of super glue will hold it in place and is guaranteed to be a perfect fit! As this toy was manufactured with many different features and airline names, we offer a wide variety of additional replacement parts. Common to all the planes is the red beacon lens listed separately here in the toy parts category. Also available are the white propellers ( round tip and square tip), and red nacelle engine covers.
-
Tippco 1930's Mercedes Fuhrerwagen Staff Car Replacement Hood Ornament created from an original piece and made of cast metal. Installs just like the as original.
-
Pyro X-300 Space Cruiser rocket ship clear replacement nose cone, crystal clear and easily snaps in place like the original. Other parts are available for this toy as well as the Pyro X-400.
-
Marx Captain Space Solar Scout Rifle REPLACEMENT CLEAR LENS. Crystal clear and screws on just like the original. Listing is for the CLEAR LENS ONLY, gun shown for identification and clarity only. These are in stock and ready to ship.
-
Bandai Rolls Royce Silver Cloud 'Flying Lady' hood ornament replica, faithfully reproduced to fit exactly like the original installation. I cast my replica from an original ornament. Unlike the replacements offered by my competitors, my 'Flying Lady' still has her head . . . *PLEASE NOTE* You may have to disassemble the toy in order to install this part, depending on whether or not the original emblem was pulled completely out or snapped off. If a piece is still showing on the top of the radiator shell, you can carefully trim the emblem base with an exacto knife and push the remainder of the shaft through the hole. The new ornament can be glued in place rather than opening the toy. These are in stock and ready to go!
-
A replica cap compartment cover for the 1950's Ideal Atomic Machine Gun. This cap is near perfect and almost a dead ringer for the often missing plug. The fit is tested on my own toy and an original stack of 5 Kilgore Roll Caps (not included) is inserted and then capped. I believe the original cap was a hollow injection molded part and quite flimsy, which is why they're almost always missing. I still resin cast my part but I designed it to be solid with the exterior look of the original. Please ask if you're looking for or need custom parts!
-
A replacement Race Car Driver for the Marx Mechanical Roadster and Indy race car offered in yellow or white. Please contact me to let me know your color selection. This is a near perfect replacement toy part made from a mold taken from an original part. It will install just like the original with no disappointments! These items are in stock and ready to ship. Looking for a great Marx car?
-
Pyro X-400 Space Explorer Replacement Canopy for the 1960's Pyro X-400 Space Explorer plastic spaceship. Created from a mold taken of an original toy part to ensure the utmost accuracy in the snap-fit installation, just like the original.
-
A nice Alps Windup Proud Peacock. The toy is all tin with rubber feet. When the toy is wound, the peacock walks and spreads his fan. He works wonderfully and would be a very nice addition to your tin toy collection.
-
'Candy Vending Machine' battery operated saving bank from Wonderful Toy Company, 1950's. This RARE and highly collectible tin battery op is in excellent WORKING condition. It operates on two 'D' cell batteries. The toy has miscellaneous scratches and scuffs, mostly from the removable top tin cover. Originally designed for use with hard candies or peanuts, I recommend small 3/8 diameter wooden or plastic beads. When the cover is removed, insert the beads into the funnel. When a coin (nickels work best) is inserted into the slot, the inside of the toy lights up, Mr. Vendor cranks his handle and rotates the open top drum. As the drum opening passes under the funnel, a couple bead 'candies' fall into the drum and are dispensed through the chute at the front of the toy and the light goes out. This is an awesomely cool and not often seen toy that will be the highlight of your battery-operated toy collection - sure to please! This toy has a rarity scale number of 9 (10 being rarest) and had a book value of $1200.00 (in mint condition) in 1994. This is an extremely fragile toy. The plastic candy funnel will be removed for shipping and the cavity will be filled with styro peanuts to keep the vendor well supported for travel.
-
Just like the original, this fin is faithfully recreated in tin. To make each half of the fin shape, custom stamping dies were created from an original Atom Jet fin. The halves are hand-assembled, and each new fin is then pre-fitted to an original toy ensuring accuracy and a perfect fit. We complete the fin with paint colors matching as close as possible to the original colors. The results are undeniable and sure to please. Installation is a breeze because the fin snaps easily into place like the original. *WE MAKE EACH FIN TO ORDER, SO PLEASE ALLOW EIGHT WEEKS FOR COMPLETION.*
-
An American National Mack Truck Gas Tank Replacement Cap. The cap was created from a mold taken of the original toy part. It is guaranteed to be a perfect fit.
-
This is a real, metal replacement battery box for the Cragstan Mr. Robot toy. It comes complete with the contact boards with new contacts and installs exactly like the original.
-
A replacement gun tip for the 1950's Marx Captain Space Solar Scout Rifle. We create parts from a mold taken of an original toy part cast in urethane. It is as close to an injection molded original toy part as you can get. It is NOT a 3D printed part! The gun tip simply slides on to the end of your rifle. Install the screw and nut (not included) and you're done. The replacement tip is available in three Marx colors; red, green and blue. We test fit each part and guarantee the part to be a perfect fit.
-
A new replacement RED LENS for the large 20" Marx friction cars with Electric Siren lights. The lens will fit the Marx Dick Tracy Squad Car, the Army Command Car and the Fire Chief Car. This lens is an exact copy of the original and is made to function exactly the same.
-
A replacement Red Lens for the Masudaya Space Capsule 6.
-
A replacement tail fin for the Yoshiya SS Space Friction Rocket. It installs just as the original. The Replacement Tail Fin is a specific component designed for the restoration or repair of the Rocket toy.
-
A replacement hat brim for the Strauss Jenny The Balky Mule Wind Up Toy.
-
This listing is for one replacement tin flag for the Wolverine Carousel. The tin flag removes easily from Wolverine Carousel, which is why you often find one or more missing from the toy. The toy in the photographs is for display purposes only and not for sale.
-
Alps Lincoln Futura Replacement Metal Antenna is an exact fitting replica of the original toy deck mounted antenna. This part will fit on all variations of the Alps Futura cars; friction, battery operated and remote control. The replacement antenna mounts to the toy using the same spring shaft configuration and is an easy install. Also available for this toy are the rubber tires and the metal steering wheel. The Alps Futura concept car is a stunning creation that is still popular today. Alps did a magnificent job of recreating this fine automobile in tin.
-
Dan Dare SS Eagle Spaceship Canopy for the tin friction rocket from Mettoy of Great Britton. This replacement canopy is an exact copy of an original toy part and is produced in amber tint. The canopy is a removable toy part that allows for flint sparking replacement. This new part contains all of the original flaws of the master part and looks tremendous! Uncle Al is the only toy specialist making this part in amber tint to match the original! Just snap it on and you're good to go.
-
Lincoln Continental Hood Ornament Antenna Set A reproduction tin and metal hood ornament/antenna combination for the Linemar 1956 Lincoln Continental tin cars. These parts are compatible with all versions of the Linemar Lincoln battery operated friction and remote control. The company liked to ship these parts separately from the toy and as a result, these parts were often lost. I fabricate the reproduction hood ornament exactly as the original with a large tab on the bottom side. This feature allows the hood ornament to insert easily into the slot above the grill. The reproduction antenna is the same as the original diameter of the shaft and fits correctly into the hole in the fender. The car in the picture is for display purposes only and is not for sale. These parts are now made to order. Please allow two weeks for delivery.
