Product Categories in this Section
-
The REPLACEMENT GEAR COVER for the Asahi Toy, Junior Products Lotus 49 F-1 battery-operated race car. Created from a mold taken of the original toy part, it is guaranteed to be a perfect fit. It is possible for tiny bubbles to appear in the casting, as shown in the pictures. This was my first cast part and more recent casts have been bubble-free. The gear cover can be installed on the two different engine versions of the Lotus toy. Plated engines used on the wing cars have molded bosses to mount the wing. This version utilizes the tiny mounting pins on the clear gear cover. Engines without plating are for the non-wing cars and the clear gear cover is installed with the pins removed as the engine has no holes for the pins to go into. The pins can be easily trimmed off for a flush fit. Both versions require the cover to be glued on and just a drop of super glue to each pin area is sufficient.
-
Irwin Man From Mars Replacement Antenna</p> This is an exact copy of the original Irwin Man From Mars Antenna and is molded in rubber. It will fit the original plastic helmet or our new replacement helmet, also sold here. The antenna should be softened in hot water prior to installing in an original, sealed helmet so as not to crack the plastic from too much stress. Just insert with a slight twisting motion. You could also add a drop of dish soap for lubrication to the antenna base to ease insertion. These parts are in stock and ready to ship.
-
The Robby Space Patrol, Moon Patrol replacement lens is available in red or green. This high-quality replacement part is guaranteed to be a perfect fit! Please specify your color choice.
-
&amp;amp;lt;span style="font-size: large;">A replacement Battery Cover Latch for the Nomura Robby Space Patrol/Moon Patrol. The latch attaches <span class="yoast-text-mark">class="yoast-text-mark">e="font-size: large;">to your existing battery cover door. This latch can be used on Robby Space Patrol, the Moon Car - Moon Patrol Space Division #3 and the Moon Space Ship.
-
Here we have a replacement windows for the battery-operated Horikawa Space Station. The replacement windows are vacuum formed of the same thickness clear plastic as the originals for a perfect fit.
-
A new flexible plastic square tip propeller for the Cragstan or Yonezawa battery operated DC-7c aircraft toys. The perfect solution to those old broken or glue covered propellers. Our new prop is a bit more flexible than the original. Please note the wings must be disassembled in order to correctly install these propellers.
-
A replacement Injection Cover for the Asahi Toy, Junior Products Lotus 49 F-1 battery-operated race car. Created from a mold taken of the original toy part, it is guaranteed to be a perfect fit.
-
Tommy-Ray Space Gun Replacement Bee Hive Battery Cap - A perfect fitting replacement Bee Hive Battery Cap for the B-W Molded Plastics Company 'Tommy-Ray Space Gun'. The space gun is a battery operated toy featuring a noisy, vibrating ray gun blast with a light up gun tip. The toy operates on two 'D' cell batteries. When batteries are inserted into the back of the gun, a folding brass contact tips up against the negative side of the battery and the Bee Hive Cap secures the brass tightly to the battery. Without the cap, the battery does not maintain contact. Due to the nature of the plastic used in manufacturing this toy, warping of the plastic battery opening often occurs in the absence of the cap. This issue can be remedied by applying medium heat with a heat gun or hair dryer completely around the battery opening, but not TOO much. *Be sure to remove the batteries before attempting this procedure!* Once softened the cap can be used to round the opening once more by manipulating the tabs of the cap into the opening and allowing the warmed plastic to cool, but this process must be done quickly as the plastic cools quickly. Many Tommy-Ray Space Guns no longer work. There is little to no way to service them because of the adhesive and type of plastic used. They are literally fused together and I've yet to successfully separate one to date. With that being said, they are still excellent display toys when complete and REALLY look good with the matching helmet and box.
-
A perfect fitting replacement Bee Hive Gun Tip for the B-W Molded Plastics Company 'Tommy-Ray Space Gun'. The space gun is a battery operated toy featuring a noisy, vibrating ray gun blast with a light up gun tip. The toy operates on two 'D' cell batteries. The Bee Hive Gun Tip is a removable toy part that provides access to the light bulb in the end of the gun and it slips snugly over the plastic that surrounds the back of the light bulb. Many Tommy-Ray Space Guns no longer work. There is little to no way to service them because of the adhesive and type of plastic used. They are literally fused together and I've yet to successfully separate one to date. With that being said, it is still an excellent display toy when complete and it REALLY looks good with the matching helmet and box.
-
Masudaya Queen of the Sea Replacement Light Domes, Set of TWO - This listing is for a set of TWO replacement light bulb covers for the Masudaya 'Queen of the Sea' battery operated tin ocean liner. These covers are and exact replica of the original toy parts and are guaranteed a perfect fit - just pop them on! Other parts are available for this toy such as the light blue radar antenna and the always missing rear tin flag. This great toy from the 1950's is such a nice, LARGE toy but many times nowadays when you find an example of this toy, it's missing some of these key, impossible to find pieces. Look no further, they're here at Uncle Al's!
-
Here is a nice set of replacement rubber grips for your Marusan Sunbeam motorcycle toy. These grips were reproduced from molds taken of original rubber grips and then re-cast in rubber for a perfect, tight fit and an exact reproduced part for authenticity. These will also fit the Bandai Meguro Motorcycle toys. Dramatically improve the look of your bikes if your grips are worn, old and split or just plain missing.
-
Cragstan Mr. Robot Replacement Eyes. This is a set of replacement eyes for the Cragstan Mr. Robot. These easily glue in place with just a couple drops of super glue.
-
A replacement Race Car Driver for the Marx Mechanical Roadster and Indy race car offered in yellow or white. Please contact me to let me know your color selection. This is a near perfect replacement toy part made from a mold taken from an original part. It will install just like the original with no disappointments! These items are in stock and ready to ship. Looking for a great Marx car?
-
Masudaya battery operated Queen of the Sea replica radar antenna. Available ONLY through Uncle Al's Toys is this plastic resin replica antenna available in light blue, dark blue and white. (Please specify color when ordering.)The antenna mounts on a rod protruding from the upper deck of the toy and is nearly always lost. Also available for the Queen is a replica tin flag and the clear light bulb domes for the upper deck! Time to complete your large cruise ship and increase it's value!
-
Tippco Mercedes Fuhrerwagen Staff Car with our Replacement Exhaust Header. This premium quality reproduction is specifically crafted to match the original exhaust header of the iconic 1930s Tippco model, ensuring a seamless integration and perfect fit.
-
Tippco 1930's Mercedes Fuhrerwagen Staff Car Replacement Hood Ornament created from an original piece and made of cast metal. Installs just like the as original.
-
This is a replacement front sight for the 1960's Sears Exclusive Bandai Area Radiation Tester. This part was cast from a mold of an original toy part and installs to the toy as original. Simply insert the end into the toy with a little adhesive and press into place. Many other parts are available for this toy.
-
Replica Knockoff Spinner for Exclusive Sears Indy 500 Turnpike Racers Replica Knockoff Spinner for the Exclusive Sears Indy 500 Turnpike Racers - This listing is for new, white metal reproduction knockoff spinners for the Sears Exclusive battery operated Indianapolis 500 Race Car or the Sears Turnpike Line friction racer and the Sears Indy 500 friction racer. These three toys utilize the same master cast spinner but have different threaded diameters. The battery operated spinner has a smaller diameter hole than the friction cars so PLEASE SPECIFY which spinner you need when you purchase. The white metal castings are a bit softer and the wings are a bit thicker than the originals but as you can see, they look and work great. Holes come drilled and tapped so all you have to do is put them on your cars. Please also note that these are fabricated to mount on original car threaded studs. If someone has broken the original studs and replaced with an aftermarket screw, these will not work. When viewing the pictures, the white Indy 500 car is sporting the new knockoffs. The green Turnpike racer has original cast spinners. Note the larger mounting stud of the Turnpike car. These parts are in stock and ready to go.
-
This listing is for a replica tin flag for the Masudaya 'Queen of the Sea' battery operated tin ocean liner. This tin flag is a nearly exact replica of the original, almost always missing tin flag that fits to the rear of the ocean liner. A shoulder is machined onto the shaft so the flag sits and fits at the appropriate height. Other parts are available for this toy such as the light blue radar antenna and the set of two clear dome light bulb covers. This great toy from the 1950's is such a nice, LARGE toy but many times nowadays when you find an example of this toy, it's missing some of these key, impossible to find pieces. Look no further, they're here at Uncle Al's!
-
A flexible plastic propeller for the Rosko Toy Viscount Airliner aircraft toy. The prop is slightly more flexible than the original part. The wing must be disassembled in order to correctly install this propeller.
-
A nice replica Antenna for the Alps Television Spaceman Robot.
-
Alps Television Spaceman and Revolving Flashing (Door) Robot Replica Ears. These new red ears come as a set to complete your toy. Simply glue in place with a few drops of super glue.
-
This brand new replacement seat for the Doepke Model Toy is created from a mold taken of an original toy part and is guaranteed to fit perfectly. The seat has the same bosses with a drilled hole to accommodate screw on fastening just like original. The seat should be washed with soap and water to remove mold release agent before painting or adhering cloth. This seat is available no where else but here and is in stock.
-
A set of replacement Ears for the Strauss Jenny the Balky Mule toy.
