-
New in original plain box. A 1920s style, polished aluminum ashtray measures about 3.5” x 5.75”. A great collectible most likely made in the Prohibition Era. Selling AS IS since the age is unknown, but assuming during the 1950's. There are many versions of this novelty available in different metals, ceramics and Bakelite. I acquired this particular item from the Pomona, California Hot Rod Swap Meet in the early 1980's.
-
Ford Gas-Turbine Van Friction Motor by M.K.K. Powered by a friction motor. Quality construction, heavy gauge metal. A nicely constructed reproduction box. Known as the Ford Gas Turbine, Experimental Superhighway Truck, this vehicle was designed to be the cutting edge of hauling transportation efficiency in 1964. It featured 600 H.P. and a cruising range of 600 miles. Our featured toy is in lightly played with condition, strong friction motor and opening rear trailer door. It's missing one light from the roof of the trailer (at the moment. I'll see if I can find it or make a new replacement.) This is an extremely collectible toy and had to come by in such nice shape.
-
Thimble-Drome Curtiss Pusher by L.M. Cox. The 1911 vintage style, engine powered airplane is a ready to assemble flying model. Complete with a T-D babe bee engine. The Thimble-Drome Curtiss flying model was only produced for one year, (1960/61) due to its delicate nature and inability to survive smooth landings. The model kits came with a parts re-ordering form that I assume was used extensively by model flyers! One of my favorite all-time kits that is extremely well made and has excellent detail. The pilot figure comes with lead weights that fit inside his legs and acts as the counterbalance to the power of the gas, .029 engine. This kit is becoming exceedingly rare to find in any condition, but this kit offered is 100%original, including the decal sheet. I offer replacement waterslide decals for this model elsewhere on our site.
-
A Gemmy Triumph the Insult Comic Dog Plush Toy in the box. Press his foot and listen to Triumph's insults as he moves his mouth to the words. This Gemmy Original features Synchro-Motion, a cutting-edge animation technology that synchronizes the motion of the mouth to words or songs, allowing an inanimate figure to come to life before your eyes. A great novelty toy for your collection or as a gift.
-
An extremely rare, in this condition, 1960s B & B Traffic Signal Bar Lamp, new in the box. The lamp is approximately 19" tall and has 3 light settings. Quality construction with corded electrical and a knob switch on the front to operate. A great novelty piece for your home bar or as a party decoration. This item has been in my personal collection for many years. I searched to find this perfectly mint, unused and unopened relic for a long time. You don't find these better than this! Bagged with crisp, original plating, this beauty is ready for display in OR out of the box. This has only been out for these pictures. Enjoy!
-
The Carousel Texaco Gas Pump Gumball Machine Bank looks like a vintage style Texaco gas pump. Quality construction, made of die cast metal with a safe plastic globe. The bank stands 21" tall and the globe on top lights up. The globe is battery powered and works. The globe holds up to 1.5 lbs of gumballs or other types of treats like candy or peanuts. The coin mechanism accepts pennies, nickels, dimes and quarters. Or set it for free dispensing. This item is new and was opened only to photograph and verify light function. This is an excellent collectible for your Texaco oil enthusiast or gas and oil memorabilia collector!
-
Made in Japan. An old family favorite and an excellent Holiday gift! Santa rings his bell to usher in the Christmas spirit!
-
This RARE, Yonezawa Alfa #53 Racer comes from the private collection of a dear friend who has been collecting toy cars for over 50 years. This is a nearly flawless, RARE race car and is 100% all original. The friction motor mechanism is strong and smooth. It is huge at 11" in length and 4 1/2" high to the top of the driver's helmet. This is an incredible, rare toy featuring the extremely unique, painted 'Sports' hubcaps. I don't believe these have been offered on any other Yonezawa car. Zero disappointments and an absolute 'must have' for the serious Indy car, open wheel racer collector. Additional photos will be provided to interested buyers. Please feel free to ask. Due to the nature of this item, interested buyers need to contact me for purchase. Payment may be made by cash, good personal check, money order / cashier’s check or bank wire transfer ONLY. Arrangements can be made for personal pick up or professional packaging and shipping. The price for this toy is $4,500.00 or you are welcome to negotiate an offer.
-
This RARE, Yonezawa Racer comes from the private collection of a dear friend who has been collecting toy cars for over 50 years. This is a nearly flawless, RARE race car and is 100% all original. The friction motor mechanism is strong and smooth. It is 11" in length and 4 1/2" high to the top of the driver's helmet. An excellent companion piece to the Yonezawa #53 racer also listed here at Uncle Al's. Zero disappointments and an absolute 'must have' for the serious Indy car collector. Additional photos will be provided to interested buyers. Please feel free to ask. Due to the nature of this item, interested buyers need to contact me for purchase. Payment may be made by cash, good personal check, money order / cashier’s check or bank wire transfer ONLY. Arrangements can be made for personal pick up or professional packaging and shipping. The price for this toy is $4,500.00 or you are welcome to negotiate an offer.
-
This RARE, Wuco Racer comes from the private collection of a dear friend who has been collecting toy cars for over 50 years. This is a nearly flawless, RARE race car and is 100% all original. The friction motor mechanism is strong and smooth. It is huge at 20" in length and 7" high to the top of the driver's helmet. This is the last known use of the Yonezawa Champion's Racer stamping dies from the 1960's. Prior to this offering by Wuco, the dies were used by Gem of France, who created and sold the #42 Super Racer. As I have owned and sold all versions of this large toy, this particular example is one of the finest I've ever seen. Zero disappointments and an absolute 'must have' for the serious Indy car collector. Additional photos will be provided to interested buyers. Please feel free to ask. Due to the nature of this item, interested buyers need to contact me for purchase. Payment may be made by cash, good personal check, money order / cashier’s check or bank wire transfer ONLY. Arrangements can be made for personal pick up or professional packaging and shipping. The price for this toy is $15000.00 or you are welcome to negotiate an offer.
-
This extremely rare CIJ Alfa Romeo P2 racer was manufactured between the years 1925 and 1935. This comes from the private collection of a dear friend who has been collecting toy cars for over 50 years. Though the toy shows age, the patina is tremendous and is 100% all original. The wind-up mechanism is still functional and strong, the steering operates by the steering wheel and also works. I will include one of Uncle Al's custom-made wind-up keys with the purchase. Please don't confuse this toy with the re-issue Alfa P2. Quality wise, there is no comparison. Many of the details that made the original toy so authentic to the real Alfa P2 racer are missing from the re-issue. Pay particular attention to the wheels, grills and decals and you'll see what I mean. Due to the nature of this item, interested buyers need to contact me for purchase. Payment may be made by cash, good personal check, money order / cashier's check or bank wire transfer ONLY. Arrangements can be made for personal pick up or professional packaging and shipping. The price for this toy is $15000.00 or you are welcome to negotiate an offer.
-
This extremely rare CIJ Alfa Romeo P2 racer was manufactured between the years 1925 and 1935. This comes from the private collection of a dear friend who has been collecting toy cars for over 50 years. Though the toy shows age, the patina is tremendous and is 100% all original. The wind-up mechanism is still functional and strong, the steering operates by the steering wheel and also works. I will include one of Uncle Al's custom-made wind-up keys with the purchase. Please don't confuse this toy with the re-issue Alfa P2. Quality wise, there is no comparison. Many of the details that made the original toy so authentic to the real Alfa P2 racer are missing from the re-issue. Pay particular attention to the wheels, grills and decals and you'll see what I mean. Due to the nature of this item, interested buyers need to contact me for purchase. Payment may be made by cash, good personal check, money order / cashier's check or bank wire transfer ONLY. Arrangements can be made for personal pick up or professional packaging and shipping. The price for this toy is $15000.00 or you are welcome to negotiate an offer.
-
This listing is for a new, WORKING replacement antenna for the Marx Colonel Hap Hazard and Hi- Bouncer Moon Scout battery operated robots. All of our reproduction parts are created from a duplicating process (NOT 3D!) using original toy parts. Parts such as this one, which feature electric, lighted components, are thoroughly researched and materials are used that most closely create the function of original parts. Correct diameter brass tubing is used on the base of the antenna for seamless, constant electrical contact just as the original part. This is done to ensure perfect fitting and authentic replacement parts that require no refinishing or altering prior to installing on your vintage toys. The results are undeniable and sure to please. We also employ this process when re-creating our tin and metal parts, which are always pre-fitted to an original toy prior to shipping to you.
-
Masudaya Space Giant Flying Saucer Replacement Tail Fins. We create all of our reproduction parts from a duplicating process using original toy parts (NOT 3D!). This ensures a perfect fitting and authentic replacement part requiring no refinishing or alteration prior to installation. The results are undeniable and sure to please. We also employ the same process when re-creating our tin and metal parts, which we pre-fit to an original toy prior to shipping to you.Your new tail fin lenses are cast in RED or GREEN. They come as a set of left and right lenses. You can order one each color or both the same color. Please specify when you order.
-
Vintage Handmade Bronze Wiking Ship by Edward Aagaard for Copenhagen Iron Art. This listing is for a patinated bronze Viking Ship made by Edward Aagaard for Iron Art in Copenhagen, Denmark. Beautifully crafted and detailed model with a dragon head on the bow and its tail on the stern. Fourteen individual shields are attached to each side of the boat using ropes made of metal wire. The mast and bench seat are made of wood and the sail is made of copper with a depiction of a bird in the center of the sail. The boat is intact and complete. It is stamped Iron Art Copenhagen on the rudder. Measures approximately 16 inches long and 13.5 inches tall. Wooden boat stand included.
-
Vintage Handmade Bronze Wiking Ship by Edward Aagaard for Copenhagen Iron Art. This listing is for a patinated bronze Viking Ship made by Edward Aagaard for Iron Art in Copenhagen, Denmark. Beautifully crafted and detailed model with a dragon head on the bow and its tail on the stern. Shields are molded into each side of the boat and are not removable. The mast and bench seat are made of wood and the sail is made of copper with a depiction of a bird in the center of the sail. The boat is intact and complete. It is stamped Iron Art Copenhagen on the rudder. Measures approximately 16 inches long and 13.5 inches tall. Wooden boat stand included.
-
Marx Linemar Feeding Bird Watcher Battery Operated Toy is in excellent, 100% complete working condition. Baby birds chirp with opening beaks while mother bird swings in from her limb perch to drop worm breakfast to the little ones. A very vivid and imagination driven toy for all ages! Feeding Bird Watcher operates on two 'D' cell batteries installed in the base.
-
Rare, TN Toys Frankenstein Hand Mechanical Bank Wind-Up made in Japan. Wind the key and watch Frankenstein's hand come out of the house and grab the coin. This bank comes with the even rarer original box. Newer versions of this bank are called 'Mystery Bank'. Frankenstein Hand Mechanical Bank is in excellent working, original condition.
-
This is a brand new custom toy manufactured by Uncle Al's Toys and is called Robot Super Cycle. Color stylings are reminiscent of the vintage tin Bandai Super Cycle. Robot Super Cycle features a die cast metal cycle with rubber tires and a tin, seated robot. The cycle and robot are hand embellished with lacquer paints, colored rhinestones and a real, working compass! Each unit is unique and serialized by Uncle Al. Toy measures approximately 7" x 4" x 2.25 ". The Uncle Al version is a special order item and requires a 4 week delivery time.
-
San Mechanical Smoking Dog "Mc Pooch" Battery Operated Tin Toy. Dog walks and smokes his pipe, billowing smoke as he goes! Works excellent and requires two 'D' cell batteries for operation.
-
Cragstan Great Astronaut Replacement Face Shield. We create the face shield from a mold taken of an original part. This ensures a perfect fitting and authentic replacement part requiring no refinishing or alteration prior to installation. The results are undeniable and sure to please. We also employ the same process when re-creating our tin and metal parts, which we pre-fit to an original toy prior to shipping to you.
-
Beautiful, Cragstan Great Astronaut robot toy in excellent, original condition. Great Astronaut is very similar to the Alps Television Space Man Robot, featuring a rotating space scene in his chest, with swaying arms as he walks. He operates on 2 'D' cell batteries in his back oxygen tanks. This is a must have 'holy grail' robot for true vintage robot and space toy collectors.
-
A Hubley Kiddie Toy American Eagle Fighter Bomber and P-47 pressed steel die cast metal toy airplane in the original box. The plane has retractable landing gear and both wings fold up. Made in the USA by Hubley Kiddie Toy. Hubley American Eagle Diecast Fighter/Bomber 2-Blade Propeller Airplane in Original Box. This P-47 die cast metal toy airplane has retractable landing gear and both wings fold up. Made in the USA by Hubley Kiddie Toy. This particular version features a 2-blade propeller. Please see our other offering featuring a four-blade propeller.
-
AMT ERTL Fiber Optic Lighting Kit. Customize any model kit, picture or other project with AMT's fiber optic lighting accessories kit. Complete with everything except batteries. Opened by Uncle and guaranteed complete!
-
Tamiya Solar Powered Dragonfly Kit Plastic Model #76007-3000. Utilizes a cam and crank mechanism powered by a solar motor and panel to create the realistic dragonfly wing action. To gain more direct solar light, you can adjust the solar panel to different angles. Recommended for ages 10 and older.
-
Revell Sox & Martin Boss Cuda 1:25 Scale Plastic Model Kit #GC-1800. Features 426 Hemi Super Stock engine, 1-PC hood and scoop, a roll bar cage, bucket seat and keystone wheels. Kit was opened by Uncle Al and is guaranteed complete!
-
Lindberg Little Red Wagon Drag Racing Team 1:25 Static Model Kit SEALED. Features include detailed chassis, engine, tires, and interior. Chrome plated parts. Also features the incredible Dodge race truck hauler!
-
Revell Tommy Ivo Showboat Four Engine Dragster 1:25 Scale Plastic Model Kit #H1285:198. Features four "hot" engines, metal axles, chrome front and rear ends, and 4 M & H Racemaster drag slicks.
-
Features a detailed interior, Mickey Thompson "Sportsman" tires, and a dual overhead cam "Hemi" engine. The AMT Ertl Pro Street '70 Coronet Super Bee 1/25 Scale Model Kit 6140 is a highly detailed and authentic replica of the classic 1970 Dodge Coronet Super Bee, a car renowned for its power and distinctive style.
-
Features SS graphics, 454 SS wheels, exclusive interior and detailed 454 cu. in. engine.
-
Jo-Han Sox & Martin Superbird 1:25 Scale Plastic Model Kit #C-1770. The wild super stocker. Molded in white, clear and plated parts.
-
Model is 9.25" long. Blue, clear and plated parts. Features detailed body, chassis and interior, hood opens to show the massive 440 c.i. V-8 engine. Uncle Al's favorite dream car, opened and inspected by Uncle and guaranteed complete!
-
Revell Sox & Martin GTX 1:25 Scale Plastic Model Kit #7365. Molded in white, clear and plated parts. Super Stock drag equipment, Keystone mags and slicks.
-
AMT ERTL Fireball 500 1:25 Scale Plastic Model Kit SEALED. The SSXR Barracuda as seen in the American International Pictures movie "Fireball 500".
-
Tommy Ivo 2 Engine Dragster. One of 5000 made by GMP in 2004. 1:18 scale. No. 14008. An exact model car intended for adult collectors. Not suitable for children under 14 years of age. Bonus DVD is missing. Beautiful die cast model car in pristine condition.
-
Tommy Ivo 4 Engine Dragster - GMP 1:18 Metal Diecast Model. One of 5000 made by GMP in 2006. Bonus DVD included. 1:18 scale. Part No. G1800809. Exact model car intended for adult collectors. Not suitable for children under 14 years of age. Die cast model car.
-
A nice Holdraketa Friction Tin Rocket. Made in Hungary in 1986. A high-quality 'push and go' friction power motor. It runs horizontally until the nose bumps into something triggering another action. The rocket can stand itself upright and the ladder unfolds and drops down to the ground. Inside you will see an astronaut. Box and rocket are in good condition overall. The rocket measures 15.25" long.
-
Lindberg Little Red Wagon 1:25 Plastic Model Kit #72158. Molded in hi-gloss plastic so no painting is necessary. Offers 2 fully detailed engine choices and hemi-head racing 426. Also features vinyl tires and clicks, detailed interior, opening hinged doors, and chrome plated parts.
-
The "AMT ERTL Ala-Kart 1:25 Scale Model Kit" is a finely detailed replica of the Ala-Kart, a legendary custom hot rod designed by George Barris and Richard Peters.
-
Scale Models 1929 Ford Model A Station Wagon#4006 Die Cast Model Kit Unassembled. Over 75 realistic pieces. Includes English instructions.
-
Scale Models 1930 Duesenberg "Speed Line Phaeton" Die Cast Model Kit #4015. Unassembled. Over 150 realistic pieces. Includes English instructions. Piece missing from box lid.</p>
-
A 1960's Marx Colonel Hap Hazard battery operated robot in excellent working condition. The Colonel is sporting new replacement oxygen tanks, a new antenna ring and insulator and a replacement antenna from an unknown source. Hap walks with correct arm movement and spinning, flashing antenna. Haps arms can be positioned as desired. This toy has been thoroughly cleaned and restored to top condition by my professional restoration business, with the exception of minor paint chips, scratches and blemishes. Black boots have minor touch ups as well as other black features on the toy.
-
A replacement brass metal battery holder and lightbulb for the 1960’s Ideal Toys Robert the Robot. The battery holder is a perfect fitting replacement brass part complete with a correct, new bulb. We test fit each battery bar to an original toy robot to ensure an exact fitting installation.
To install, just remove Robert's head and insert the battery into the holder. Install the part into the robot's body cavity and reinstall the head. He is now ready to light up!
-
A new replacement small driver for the Marx Race Cars requiring a smaller driver with a single mounting pin. The part is cast in the white color as shown. Please see my other listing offering the dual mounting pin driver. It is a bit larger and fits the larger race cars and roadsters. These replacement drivers are the nicest available and fit perfectly just as the originals.
-
A new, unopened FAO Schwarz Sweet Rocket Candy Dispenser in the very desirable TEAL color. The candy dispenser operates with 4 AA batteries and works by motion sensor. A simple wave under the chute delivers your favorite candy. The package lists item recommendations. The class rocket design and beautiful retro teal color makes this candy dispenser a winner. Perfect for game rooms, bars or space toy collectors. Get it while you can! We purchased the last remaining stock from FAO Schwartz and they're really taking off!
-
A new, replacement metal helmet ring and fiber insulator for the Marx Colonel Hap Hazard battery operated Robot and the Marx Hi-Bouncer Moon Scout Robot. These parts are commonly missing from the toy because of aggressive removal of the lighted antenna. The ring and fiber gasket design keeps the lighted antenna from shorting out during operation. We fabricate these parts from original toy parts for dimensional reference. Test fitting each part to the original toy ensures a hassle free, easy installation.
-
A 1960's Marx Colonel Hap Hazard battery operated robot in excellent working condition. The Colonel is sporting new replacement oxygen tanks, a new antenna ring and insulator and a replacement antenna from an unknown source. Hap walks with correct arm movement and spinning, flashing antenna. Haps arms can be positioned as desired. This toy has been thoroughly cleaned and restored to top condition by my professional restoration business, with the exception of minor paint chips, scratches and blemishes. Black boots have minor touch ups as well as other black features on the toy.
-
New hollow cast OXYGEN TANKS for the Marx Hi-Bouncer Moon Scout battery operated robot (set of 2). We create our reproduction parts from a duplicating process using original toy parts (NOT 3D!). This process ensures a perfect fitting and authentic replacement part requiring no refinishing or alteration prior to installation. The results are undeniable and sure to please. We employ the same process when re-creating our tin and metal parts, which we pre-fit to an original toy prior to shipment.Your new oxygen tanks come hollow cast in white with red painted nozzles as shown, JUST AS ORIGINAL!
-
A new battery cover LATCH for the Marx Colonel Hap Hazard battery operated robot. We create our reproduction parts from a duplicating process using original toy parts (NOT 3D!). This process ensures a perfect fitting and authentic replacement part requiring no refinishing or alteration prior to installation. The results are undeniable and sure to please. We employ the same process when re-creating our tin and metal parts, which we pre-fit to an original toy prior to shipment.Your new latch comes with the brass mounting eyelet as shown, JUST AS ORIGINAL!
-
New hollow cast OXYGEN TANKS for the Marx Colonel Hap Hazard battery operated robot (set of 2). We create our reproduction parts from a duplicating process using original toy parts (NOT 3D!). This process ensures a perfect fitting and authentic replacement part requiring no refinishing or alteration prior to installation. The results are undeniable and sure to please. We employ the same process when re-creating our tin and metal parts, which we pre-fit to an original toy prior to shipment.
Copyright © 2024 Uncle Al's Toys. All rights reserved.
Website design and developed by Concept Infoway LLC