-
The "AMT ERTL Ala-Kart 1:25 Scale Model Kit" is a finely detailed replica of the Ala-Kart, a legendary custom hot rod designed by George Barris and Richard Peters.
-
Features SS graphics, 454 SS wheels, exclusive interior and detailed 454 cu. in. engine.
-
AMT ERTL Fiber Optic Lighting Kit. Customize any model kit, picture or other project with AMT's fiber optic lighting accessories kit. Complete with everything except batteries. Opened by Uncle and guaranteed complete!
-
AMT ERTL Fireball 500 1:25 Scale Plastic Model Kit SEALED. The SSXR Barracuda as seen in the American International Pictures movie "Fireball 500".
-
Features a detailed interior, Mickey Thompson "Sportsman" tires, and a dual overhead cam "Hemi" engine. The AMT Ertl Pro Street '70 Coronet Super Bee 1/25 Scale Model Kit 6140 is a highly detailed and authentic replica of the classic 1970 Dodge Coronet Super Bee, a car renowned for its power and distinctive style.
-
New from Uncle Al's Toys! Horikawa Space Station replica Antenna Dish and Mast in Red or Silver Gray. Made exactly like the original this antenna dish and mast will fit perfectly should your Space Station be lacking. My tower (sold separately)also comes with the drive wheel and shaft. These dishes are used on both the red and blue versions of this toy.
-
1929 Buddy L #208 Transportation Company Bus, 100% Original - This is one of the finest, all original, heavy pressed steel toy busses that you will ever see. This Buddy L Transportation Coach is in incredible, 100% original, unrestored condition with the original leather pull cord still attached. At an impressive 30" length, it's one of the largest toy busses ever produced. The toy has minor surface imperfections and there is mild wear to the original aluminum wheels. As this was also considered a 'ride on' style toy, the steerable front wheels were operated by the riding child turning the spare tires on either side of the front cowl. The toy features steerable wheels and both left and right front opening doors. The original paint is time aged but remarkably few chips or imperfections. The original decals are at 90%. Plated surfaces are tarnished and left unrestored. This is a true museum piece that was acquired from a reputable, world travelled dealer of fine antiquities. There are no disappointments here. Additional photos are available on request and please, only serious inquiries answered. This toy can be purchased through direct contact ONLY and acceptable payment will be by bank draft, direct wire transfer or verified personal check.
-
Anzio Beach Plastic Model Sealed Kit 1968 by Aurora. Complete with 7 Vehicles (4 Tanks, LCT, Raft, Jeep), Bunkers, Ridges, Barricades, Trees, Rocks, Barrels, Boxes, Bales and 50 Combat Troops (American and Axis).
-
Here we have a complete 4-piece replacement Peter Tork Guitar Player Figure for the large-scale battery-operated Pontiac GTO Monkeemobile. This exceptional toy comes from the manufacturer Aoshin ASC. Our Peter Tork figure comes in 4 pieces, just like the original. You will receive a figure with the body and arms in LIGHT BLUE and the head in FLESH TONE. We complete the figure with all of the paint details such as hair, hands and the shirt giving us a finished product closely resembling the original product. The figure also comes with mounting screws for attachment.
-
A replacement red button for the battery-operated sound box. If your Monkeemobile is missing this button, the sound mechanism is very hard to operate. Just a drop of Super Glue will bond the replacement button to the stem. The button is translucent red, just like the original. Many additional parts are available for this toy. Please keep looking at Uncle Al's!
-
Here we have a complete 4-piece replacement Davey Jones Guitar Player Figure for the large-scale battery-operated Pontiac GTO Monkeemobile. This exceptional toy comes from the manufacturer Aoshin ASC. Our figure comes in 4 pieces like the original. You will receive a figure with the body and arms in MEDIUM BLUE and the head in FLESH TONE. We complete the figure with all of the paint details such as hair, hands and the shirt to give us a finished product closely resembling the original product. The figure also comes with mounting screws for attachment.
-
Here we have a complete 4 piece replacement Michael Nesmith Driver Figure for the large scale battery-operated Pontiac GTO Monkeemobile. This exceptional toy comes from the manufacturer Aoshin ASC. Our figure comes in 4 pieces, just like the original. You will receive a figure with the body and arms in LIGHT ORANGE and the head in FLESH TONE, so it closely matches the original. We complete the figure with all of the paint details such as hair, hands and the shirt giving us a finished product closely resembling the original product. The figure also comes with mounting screws for attachment. The replacement Michael Nesmith Driver Figure is only available at Uncle Al’s Toys!
-
Asahi Corp. Toys Junior Products, battery operated 1/10 scale Lotus 49 Ford F-1 formula race car, CUSTOM, in excellent working condition. This is a beautiful car that Asahi SHOULD have made but didn't. The car sports the engine cover and front spoiler from a Gold Leaf car. I painted the front spoiler in the special yellow/green paint scheme and added the large silver wing. This is car #36.
It has been in my personal collection for several years and displayed in a glass cabinet.,
The toy has a few minor playwear imperfections but nothing distressing and is still a superior condition, working example to display.
-
The REPLACEMENT GEAR COVER for the Asahi Toy, Junior Products Lotus 49 F-1 battery-operated race car. Created from a mold taken of the original toy part, it is guaranteed to be a perfect fit. It is possible for tiny bubbles to appear in the casting, as shown in the pictures. This was my first cast part and more recent casts have been bubble-free. The gear cover can be installed on the two different engine versions of the Lotus toy. Plated engines used on the wing cars have molded bosses to mount the wing. This version utilizes the tiny mounting pins on the clear gear cover. Engines without plating are for the non-wing cars and the clear gear cover is installed with the pins removed as the engine has no holes for the pins to go into. The pins can be easily trimmed off for a flush fit. Both versions require the cover to be glued on and just a drop of super glue to each pin area is sufficient.
-
A replacement Injection Cover for the Asahi Toy, Junior Products Lotus 49 F-1 battery-operated race car. Created from a mold taken of the original toy part, it is guaranteed to be a perfect fit.
-
This PLASTIC WING for the 1/10 scale battery operated Asahi Junior Toys Gold Leaf Lotus 49 Ford F-1 race car. The wing was created from a mold taken from an original toy part and is an exact copy of the original, perfect fitting and strong material. Many of these cars are missing this accessory and now there is this excellent replacement available from Uncle Al's Toys. Please note that this listing is for ONE WING ONLY - NO CAR. These parts are in stock and ready to ship!
-
This is a complete set (4PCS), two guitars and two drumsticks for the 1960's Aoshin ASC Monkee Mobile battery operated car. The original parts are so often broken or missing from this toy. These are cast replacements from a mold taken from original components and are a perfect fit. I also have replacement arms, bodies, heads, engine and scoop, voice box buttons and hubcaps for this toy with pictures and pricing to come.
-
A 1960's Aoshin ASC Batmobile battery operated toy Batmobile in excellent working condition. It's a 'Mystery Action', bump n' go style toy that requires two 'D' cell batteries for operation. Batman and Robin figures in the cockpit sit below the slow timed, flashing beacon light. A faster flashing light emits through the rocket tubes and red turbine lens in the rear. An extremely cool Batman collectible in beautiful shape!
-
Very nice Ha Ha Toys Astro Spaceman Robot in his original box is ready for action! Ha Ha Toys robots are known for having better quality gear systems than newer versions of this toy and are more sought after because of that. Batteries have been installed and the toy was hand tested for function and then promptly returned to the original packaging. Astro Spaceman Robot walks with swinging arms and his chest 'dash board' lights up. He works great and looks even greater when functioning! This toy comes in its original box with inserts. It was removed for these photographs only.
-
Austin powers car produced by RC2 in 2003, the Austin Powers Mini Cooper diecast model car is a true-to-scale replica of the car driven by the 60's British Intelligence undercover agent himself. Like any spy worth his weight in love beads, Powers relies on specially equipped vehicles to give him the edge in the battle of good versus evil. The Austin Powers Mini Cooper features posable front wheels and opening doors. The dimensions of this "shag-a-delic" replica are approximately L-8, W-3.5, and H-3 inches. The window box dimensions are L-13.75 x W-6.25 x H-5.25 inches. The model is still in its original packaging with the original plastic banding still around the car. It was never displayed and the box only shows some minor wear from storage. A must-have for true collectors!
-
<span style="float: none; background-color: #ffffff; color: #333333; cursor: text; font-family: Georgia,'Times New Roman','Bitstream Charter',Times,serif; font-size: 16px; font-style: normal; font-variant: normal; font-weight: 400; letter-spacing: normal; text-align: left; text-decoration: none; text-indent: 0px;">New from Uncle Al's is this great set of replacement TAIL LIGHTS for the Bandai 1959 Cadillac tin friction automobile. You get a left and a right to complete the rear end of your car. Some modeling experience is helpful, but if you're doing this yourself you're probably already quite handy! These are very small and fit the 11 1/2" version of the car. Bandai 1959 Cadillac replacement tail lights, sold in pairs and currently only available HERE! These require the installer to trim off the mold pin in order to properly fit into the plated trim on the toy and are a PERFECT FIT replacement made from a mold of the original parts. My replacements are shown installed on one of my Cadillacs!
-
This is a Bandai 1959 Cadillac tin friction car in excellent original condition. The toy has very minor scuffing (possibly box rub) and is virtually un-played with. The tire treads are crisp and the friction is very strong. This toy has been in my personal collection for several years. This would be a beautiful addition to any tin toy car collectors fleet.
-
A replacement antenna for the 1960's Sears Exclusive Bandai Area Radiation Tester. Modeled from pictures of an original toy part, the Antenna installs to the toy the just like the original. We have many other parts available for this toy! Sears Exclusive toys are highly sought after and extremely collectible because of their diverse subject matter and outstanding quality. The Area Radiation Tester made its first and only appearance in the 1961 edition of the Sears Christmas Catalog as a Sears Exclusive toy. A truly unique and futuristic toy, the Area Radiation Tester is an action toy. Featuring Bump N Go movement, alternating flashing red and green light pods and an articulated radar arm that rises from the rear of the toy in a cloud of smoke! Operates on two 'D' cell batteries inserted into the bottom of the toy. To commence the action, simply slide the carefully hidden On/Off switch on the rear of the toy. The toy automatically comes to a full stop when the rising radar dish pops through the bay doors. Truly an amazing sight to view this toy in operation!
-
A replacement Canopy for the Bandai Area Radiation Tester. The pivotal and meticulously crafted component, embodying precision and authenticity to cater to the discerning needs of enthusiasts and collectors seeking to revive the functionality and aesthetics of their cherished vintage radiation testers.
-
This is a replacement front sight for the 1960's Sears Exclusive Bandai Area Radiation Tester. This part was cast from a mold of an original toy part and installs to the toy as original. Simply insert the end into the toy with a little adhesive and press into place. Many other parts are available for this toy.
-
Bandai Area Radiation Tester Replacement LIGHT POD, Left Hand GREEN is now finally available. These light pods were created from molds made of the original toy parts. The brass contacts for the light bulbs are hand made of the same thickness and configuration of the original parts. The same wattage bulbs are installed and colored as original. Ample wire is supplied and will be trimmed to length when you install. It should be noted that the pods are designed to be installed in the same fashion as the original parts. Some skill is required to open the tin pod pylons (not included - you must have the original pylons). The pods are secured to the pylon by brass eyelets with a minimum length of approximately 3/16". Once mounted, the wiring for each pod is trimmed to length and soldered to the pylon electrical mount pins. Be sure to apply electrical tape over the solder connections before reassembling the two pylon halves. The pods are also available as a set for a discounted rate of $250.00.
-
Bandai Area Radiation Tester Replacement LIGHT POD, Right Hand RED is now finally available. These light pods were created from molds made of the original toy parts. The brass contacts for the light bulbs are hand made of the same thickness and configuration of the original parts. The same wattage bulbs are installed and colored as original. Ample wire is supplied and will be trimmed to length when you install. It should be noted that the pods are designed to be installed in the same fashion as the original parts. Some skill is required to open the tin pod pylons (not included - you must have the original pylons). The pods are secured to the pylon by brass eyelets with a minimum length of approximately 3/16". Once mounted, the wiring for each pod is trimmed to length and soldered to the pylon electrical mount pins. Be sure to apply electrical tape over the solder connections before reassembling the two pylon halves. The pods are also available as a set for a discounted rate of $250.00.
-
Bandai Area Radiation Tester Replacement LIGHT PODS, L&R Set of two lights are now finally available. These light pods were created from molds made of the original toy parts. The brass contacts for the light bulbs are hand made of the same thickness and configuration of the original parts. The same wattage bulbs are installed and colored as original. Ample wire is supplied and will be trimmed to length when you install. It should be noted that the pods are designed to be installed in the same fashion as the original parts. Some skill is required to open the tin pod pylons (not included - you must have the original pylons). The pods are secured to the pylon by brass eyelets with a minimum length of approximately 3/16". Once mounted, the wiring for each pod is trimmed to length and soldered to the pylon electrical mount pins. Be sure to apply electrical tape over the solder connections before reassembling the two pylon halves. The pods are also available separately for $135.00 each. A discount savings is applied when buying the set of two and is reflected in this price of $250.00.
-
Bandai Area Radiation Tester Replacement RADAR DISH is a 3 piece part. The dish has a plastic backing, center plastic mount and a metal reflector. It attaches to the toy exactly as the original with holes for the mounting pin and extension arm. More parts are available for this toy.
-
This is an item that I've needed to make for some time and finally have it ready for purchase. The Bandai Volkswagen Bus battery operated version has this delicate, rear opening door that is so often missing from these toys. I had a toy with a damaged original door that I was able to recreate in tin to look and function just as original. This new tin door comes as shown in white automotive primer for $95.00 USD and can be finish painted in either RED or CREAM IVORY as the two original toy color versions that were available for an additional $25.00. It also comes with the hinge pin for mounting the door to the vehicle. This is an absolute must have if your bus is missing its rear hatch door and it is available no where else!
-
Beautiful Bandai BMW Isetta friction powered vehicle in excellent original condition. Friction motor is sound and firm as new and the toy features a realistic opening front end to enter the vehicle.
-
A hood ornament replica for the Bandai Lincoln Convertible/Coupe. The replica is cast from an original ornament and fits exactly like the original installation. These are in stock and ready to go. *PLEASE NOTE* You may have to disassemble the toy in order to install this part, depending on whether or not the original emblem was pulled completely out or snapped off. If a piece is still showing on the top of the radiator shell, you can carefully trim the emblem base with an Exacto knife and push the remainder of the shaft through the hole. The new ornament can be glued in place rather than opening the toy.
-
Bandai Rolls Royce Silver Cloud 'Flying Lady' hood ornament replica, faithfully reproduced to fit exactly like the original installation. I cast my replica from an original ornament. Unlike the replacements offered by my competitors, my 'Flying Lady' still has her head . . . *PLEASE NOTE* You may have to disassemble the toy in order to install this part, depending on whether or not the original emblem was pulled completely out or snapped off. If a piece is still showing on the top of the radiator shell, you can carefully trim the emblem base with an exacto knife and push the remainder of the shaft through the hole. The new ornament can be glued in place rather than opening the toy. These are in stock and ready to go!
-
Another wonderful friction car is the Bandai Rolls Royce Silver Cloud Convertible. This beautiful convertible is in excellent, fully working condition. A must have for collectors and enthusiasts alike!
-
Without a doubt, one of the RAREST and coolest space toys ever made. 1960's Bandai Sears Radiation Tester Exclusive Area battery operated toy in nice working condition. This toy was available ONLY through Sears and could be found in their 1961 catalog. It operates on two 'D'cell batteries and features Bump N Go action, opening rear bay doors, a smoky fog emits while the radiation tester unfolds and lifts out of the bay. The arm retracts back into the bay and the doors close and the toy is on it's way again. During the entire cycle, the light pods in the rear flash red and green intermittently and are very bright. This early Japanese tin toy is a highly sought after space toy example and is sure to please. As can be seen in the pictures, the toy is in working condition and shows playwear and no paint touch ups. The battery compartment is very clean. This is a sizable toy stretching 21 inches in length, 5 inches wide and nearly 6 inches tall to the top of the antenna. Uncle Al's Toys is the only maker and provider of replacement parts for this toy. Both toys available here have replacement light pods, large antenna and front sight. Also included but not shown is a wonderful, first quality reproduction box, also available nowhere else! A great old vintage battery operated space toy that makes an outstanding functioning shelf piece display. This is not one to miss!
-
This is a wonderful Bandai Silver Cloud Rolls Royce Hardtop battery operated toy in excellent, fully working condition. A must have for collectors and enthusiasts alike!
-
A new replacement seat for the Bandai Silver Pigeon Scooter. Molded and cast from an original seat so the shape and diameter are a perfect fit. The rubber hand grips for this toy are also available.
-
Replica Batman Batcuffs 1966 Ideal Batman Utility Belt Accessory
Replica Batman Batcuffs for the 1966 Ideal Batman Utility Belt. An accessory for the utility belt worn by Batman in the original 1966 TV series. These batcuffs are an exact replica of the original. -
Battery Box Marx Hootin Hollow Haunted House is a perfect fitting replacement tin part complete with battery contacts. Each battery box is test fit to an original toy rear panel to ensure an exact fitting installation. Just solder your wires and go! The battery contacts are slightly different than the original ONLY in that I have installed the flexible brass contact at both ends rather than the round stationary contact as original. The contact board is also gray vs. the original tan color. *Please note* You will see in one of the gallery pictures that I have installed 3 'D' Cell batteries in the new box. These are Heavy Duty batteries - NOT ALKALINE BATTERIES! Alkaline batteries did not exist at the time the haunted house and many other tin battery toys were made. Slightly dimensionally larger than the heavy duty batteries, it explains why so many vintage toys with either tin OR plastic battery boxes have damaged battery boxes. Always remember, NO ALKALINE BATTERIES IN ANTIQUE/VINTAGE TOYS! Marx Hootin’ Hollow Haunted House first appeared on TV in the mid 1960’s. The commercial features a spooky announcer and two children playing with and truly enjoying the houses many amazing features. The toy boasts a jumping cat, a witch behind the opening front door, a ghost floating in the air behind a lighted window, a scary window shade, a shaking roof with banging shutters, a spooky, eerie sound and a frightening loud whistling noise. All of these features are operated by buttons and 3 ‘D’ cell batteries. Other available parts we make for this toy include the witch behind the door, the standing black cat, and the gray plastic buttons. Please watch for the Marx Hootin’ Hollow Haunted House to appear in stock at Uncle Al’s Toys!
-
The BIG CHIEF DELUXE bicycle light is hand painted in brilliant, vibrant multicolor. The 308 stainless steel mounting stem needs no extra care and secures easily to the bicycle's axel utilizing the wheel mounting nut, front or rear. The light has a 36" wire lead that attaches to a 'positive' battery lead and the mounting stem acts as the system ground. The lights to attach to both original tank bike lighting or dynamo light systems. Future editions of light pairs will be available as LED wireless installation. Coming soon, Uncle Al's Toys will introduce another version of the Big Chief light for your fender.
-
Add a splash of color to your bike with the new BIG CHIEF bicycle accessory light set! The 308 stainless steel mounting stem needs no extra care and secures easily to the bicycle/s axel utilizing the wheel mounting nut, front or rear. The light has a 36†wire lead that attaches to a 'positive' battery lead and the mounting stem acts as the system ground. These units attach to original tank bike lights or dynamo light systems. Future editions will be available as LED wireless installation. The Big Chief bike light is available in red or blue with more colors to be added soon. It is currently sold in pairs with FREE SHIPPING (lower 48 only). Made in the USA!
-
Buddy L Mechanical Scarab Windup Automobile. A pressed steel toy measuring about 10" long with a wind-up motor on the rear wheels.. Be sure to check out the video. This is a very unique and imaginative toy produced by Buddy L in the mid 1930's. The toy is in very good to excellent operating condition, with original paint and Scarab decals on the doors. The toy shows moderate playwear, with numerous scratches overall but the plated trim is clean. This is an extremely well made and unusual subject, collectible toy. To operate the toy, swing the stop lever to secure the rear wheels from rotating and wind the mechanism. Place the toy on the floor, release the stop lever and watch the Scarab move in a forward direction. As the mechanism continues its cycle, a small wheel drops at the rear of the mechanism causing the Scarab to turn in another direction.
-
Line Mar Calypso Joe the Drummer Mechanical Figurine. A very nice tin litho windup toy with a reproduction box from ToyTent. Joe works perfectly, pounding his drum and rocking back and forth.
-
Vintage 1960's Ohio Art Carnival Shooting Gallery in wonderful complete and working condition. Received as a birthday present when I was a kid, this large and heavy wind up tin toy has ducks on a conveyor belt that slowly pass in front of a circular spinning target. The original elastic belts are still in very good condition and the toy works well. It comes with two original dart guns and two original black shaft darts. An after market package of Ohio Art darts is included as the rubber tips are in good shape. This toy comes in the original box and shows wear and age but displays nicely. Beautiful full color litho gallery in extremely nice condition and rare to find with two original working dart guns/darts!
-
Child Guidance Mechanical Helicopter No. 8200. A child's introduction to mechanics. The gears turn, the motor spins and it makes a realistic sound. Wind it up and watch it run! The helicopter can be disassembled and is color-coded for easy reassembly. The Child Guidance series of Mechanical Toys are tremendous teaching tools. Children learn the science behind how things work, by watching the operation of gears working together to create action and movement. You'll find the rarest examples of these toys right here!
-
A child's introduction to mechanics. Wind it up and watch it run! The train can be disassembled and is color-coded for easy reassembly. The Child Guidance series of Mechanical Toys are tremendous teaching tools. Children learn the science behind how things work, by watching the operation of gears working together to create action and movement. You'll find the rarest examples of these toys right here!
-
Child Guidance Mechanical Pay Phone No. 8270 new in original plastic box. Complete with coins. A child's introduction to mechanics. Wind it up and watch it run! The pay phone can be disassembled and is color-coded for easy reassembly. The Child Guidance series of Mechanical Toys are tremendous teaching tools. Children learn the science behind how things work, by watching the operation of gears working together to create action and movement. You'll find the rarest examples of these toys right here!
-
Child Guidance Mechanical Robot No. 8260 new in original plastic box. A child's introduction to mechanics. Wind it up and watch it run! The robot can be disassembled and is color-coded for easy reassembly. The Child Guidance series of Mechanical Toys are tremendous teaching tools. Children learn the science behind how things work, by watching the operation of gears working together to create action and movement. You'll find the rarest examples of these toys right here!
-
Child Guidance Mechanical V-8 Engine, No. 8280. A child's introduction to mechanics. Wind it up and watch it run! The engine can be disassembled and is color-coded for easy reassembly. The Child Guidance series of Mechanical Toys are tremendous teaching tools. Children learn the science behind how things work, by watching the operation of gears working together to create action and movement. You'll find the rarest examples of these toys right here!
-
This is a replacement WIND UP KEY for the CIJ Alfa P2 Racer , made in France. All dimensions for the replacement were taken from an original key. The brass shaft diameter and the steel winding handle are of the same thickness as the original key. The length is correct and allows winding without interference or binding near the back wheel of the toy. If you look closely at the pictures, I also drilled and inserted a brass locking pin which secures the handle to the shaft, just as original. These can be ordered with black painted steel winding handle or aged patina. Please specify when ordering. These are in stock in both variations shown here. Make your Alfa complete with one of these rare keys.
Copyright © 2024 Uncle Al's Toys. All rights reserved.
Website design and developed by Concept Infoway LLC