-
A replacement Red Lens for the Masudaya Space Capsule 6.
-
A replacement tail fin for the Yoshiya SS Space Friction Rocket. It installs just as the original. The Replacement Tail Fin is a specific component designed for the restoration or repair of the Rocket toy.
-
A replacement hat brim for the Strauss Jenny The Balky Mule Wind Up Toy.
-
This listing is for one replacement tin flag for the Wolverine Carousel. The tin flag removes easily from Wolverine Carousel, which is why you often find one or more missing from the toy. The toy in the photographs is for display purposes only and not for sale.
-
The Yonezawa Burger Chef is a very cute battery operated tin toy from 1950's. It came with a hamburger for the frying pan which the Burger Chef would flip over as it was cooking. However this loose accessory was often lost and the toy is usually seen without the hamburger.
-
Alps Lincoln Futura Replacement Metal Antenna is an exact fitting replica of the original toy deck mounted antenna. This part will fit on all variations of the Alps Futura cars; friction, battery operated and remote control. The replacement antenna mounts to the toy using the same spring shaft configuration and is an easy install. Also available for this toy are the rubber tires and the metal steering wheel. The Alps Futura concept car is a stunning creation that is still popular today. Alps did a magnificent job of recreating this fine automobile in tin.
-
Dan Dare SS Eagle Spaceship Canopy for the tin friction rocket from Mettoy of Great Britton. This replacement canopy is an exact copy of an original toy part and is produced in amber tint. The canopy is a removable toy part that allows for flint sparking replacement. This new part contains all of the original flaws of the master part and looks tremendous! Uncle Al is the only toy specialist making this part in amber tint to match the original! Just snap it on and you're good to go.
-
Lincoln Continental Hood Ornament Antenna Set A reproduction tin and metal hood ornament/antenna combination for the Linemar 1956 Lincoln Continental tin cars. These parts are compatible with all versions of the Linemar Lincoln battery operated friction and remote control. The company liked to ship these parts separately from the toy and as a result, these parts were often lost. I fabricate the reproduction hood ornament exactly as the original with a large tab on the bottom side. This feature allows the hood ornament to insert easily into the slot above the grill. The reproduction antenna is the same as the original diameter of the shaft and fits correctly into the hole in the fender. The car in the picture is for display purposes only and is not for sale. These parts are now made to order. Please allow two weeks for delivery.
-
New from Uncle Al's Toys is this excellent replacement missile for the 1960's Mattel Lost in Space Roto Jet Gun. This round, flying missile was created by making a mold of an original toy part. The two part mold captures all of the fine details of the missile for the best and ONLY current reproduction of this part. Be sure to view all of the attached pictures showing the flying missile in action! If your Roto Jet Gun is still working and in need of projectiles, your search is over. These parts are in stock and ready to ship. Danger Will Robinson!! The Roto Jet Gun was a wildly popular toy from the mid 1960's and coincided with the equally popular TV series, 'Lost In Space'. The box packaging for the toy featured the likeness of child star Billy Mumy in his space suit firing his Roto Jet Gun. It also listed all of the accessory pieces and different gun configurations. A boxed version of this toy sold on eBay in 2019 for just over $2900.00! The Roto Jet Gun shown in the pictures is for toy clarification only and is not currently available. This sale is for ONE missile only.
-
Marx Pete the Parrot This Marx Pete the talking Parrot toy from the 1960's comes to you in nearly flawless, mint condition with the original box, hang tag and instruction sheet. This awesome battery-operated toy requires 3 D cell batteries and one 9 volt battery for the talking feature. This is one of the first battery operated toys to feature the use of transistors for operation. The voice recording mechanism utilizes the 9 volt battery. Pressing one of the buttons on the base allows you to record a special message. After the recording is completed, pressing the button again plays back your message and actuates Pete's beak, eyes and head movement to imply Pete speaking with your voice. These toys are almost never seen in this virtually unplayed with condition. The original box lid has a bit of damage and the missing pieces of the front are included should you wish to have the box repaired. This is a beautiful and outstanding collectible toy.
-
This is a brand new replacement windshield/convertible top for the 1950's 20" tin Marx Falcon friction drive car. The top comes clear and ready for painting in your favorite color. This new top was created from a mold made from the black top in the pictures. As you can see, it's a perfect fit and the glass is clear. The mounting pins are about 1/4" long. A perfect replacement for that cracked, warped or missing top.
-
XM-12 Moon Rocket - Yonezawa - Replacement Cockpit Canopy - Perfect fit replacement, crystal clear canopy just like original! Our canopy was created from a mold taken of an excellent condition original part in order to provide you the finest nearly exact copy available. We also offer other parts for this toy and are experts in it's repair and restoration. We will be offering replacement snap on tin fins and the twist on rear plated exhaust with light in the very near future!
-
Austin powers car produced by RC2 in 2003, the Austin Powers Mini Cooper diecast model car is a true-to-scale replica of the car driven by the 60's British Intelligence undercover agent himself. Like any spy worth his weight in love beads, Powers relies on specially equipped vehicles to give him the edge in the battle of good versus evil. The Austin Powers Mini Cooper features posable front wheels and opening doors. The dimensions of this "shag-a-delic" replica are approximately L-8, W-3.5, and H-3 inches. The window box dimensions are L-13.75 x W-6.25 x H-5.25 inches. The model is still in its original packaging with the original plastic banding still around the car. It was never displayed and the box only shows some minor wear from storage. A must-have for true collectors!
-
Produced by Ertl Collectibles in 2004, the 1974 Plymouth Duster diecast model car is Issue No. 11 and part of a Limited Edition of 2004. This model is a true-to-scale replica of the "Miss Mighty Mopar" 1974 Plymouth Duster driven by long-time Chrysler racer Judy Lilly. In 1975, Judy drove this 1974 Plymouth Duster into the winners circle in several major events. She became the first female competitor to win the Gaternationals at Gainesville in Super Stock. In all, Judy Lilly held 4 national and 5 divisional drag racing titles and she never finished lower than 3rd in the NHRA standings during her 12 years on the circuit. In addition, Judy won driver of the year honors in 3 different years and was one of Mopar's best ever in the quarter mile. This 1974 Plymouth Duster diecast model features opening doors and hood, steerable front wheels, chrome wheels, authentic logos and paint colors and a beautifully detailed interior. The dimensions of the car are approximately L-10.5, W-4.5, H-3 inches. The window box dimensions are L-13.5 x W-6.5 x H-6 inches. The model is still in its original packaging. It was never displayed and the box shows minimal wear from storage. A must have for true collectors!
-
1968 Dodge Dart 440 GTS diecast
Produced by Ertl in 2005, the 1968 Dodge Dart 440 GTS diecast model car 1:18 scale is part of a Limited Edition of 2500 cars. A true-to-scale replica of MOPAR Champion Ron Mancini's bumble bee-striped SS/EA 440 Dart, which on its first time out created a new class record of 12.02, 118 mph. Ron drove it to the world record and second place overall in national points in 1968 and was only edged out by another Dodge in the last race of the season. This diecast model is No 7 in the Series and features opening doors and trunk, removable front hood, chrome accents, real rubber tires and a beautifully detailed interior. The dimensions of the car are approximately L-10.5, W-4.25, H-3 inches. The window box dimensions are L-13.75 x W-6.5 x H-5.75 inches. The model is still in its original packaging with the plastic banding still around the model. It was never displayed and the box shows minimal storage wear. A must have for true collectors! -
Produced by Ertl Collectibles in 1996, the 1969 Dodge Daytona Charger 1:18 scale diecast model car is part of the American Muscle series Collector's edition. The 426 Hemi MOPAR diecast model features true-to-scale details. Opening doors and trunk, removable front hood, chrome accents, real rubber tires and a beautifully detailed interior. The dimensions of the car are approximately L-10.5, W-4.25, H-3 inches. The model is still in its original packaging and the box shows minimal storage wear. A must have for true collectors!
-
This listing is for a replica tin flag for the Masudaya 'Queen of the Sea' battery operated tin ocean liner. This tin flag is a nearly exact replica of the original, almost always missing tin flag that fits to the rear of the ocean liner. A shoulder is machined onto the shaft so the flag sits and fits at the appropriate height. Other parts are available for this toy such as the light blue radar antenna and the set of two clear dome light bulb covers. This great toy from the 1950's is such a nice, LARGE toy but many times nowadays when you find an example of this toy, it's missing some of these key, impossible to find pieces. Look no further, they're here at Uncle Al's!
-
Tommy-Ray Space Gun Replacement Bee Hive Battery Cap - A perfect fitting replacement Bee Hive Battery Cap for the B-W Molded Plastics Company 'Tommy-Ray Space Gun'. The space gun is a battery operated toy featuring a noisy, vibrating ray gun blast with a light up gun tip. The toy operates on two 'D' cell batteries. When batteries are inserted into the back of the gun, a folding brass contact tips up against the negative side of the battery and the Bee Hive Cap secures the brass tightly to the battery. Without the cap, the battery does not maintain contact. Due to the nature of the plastic used in manufacturing this toy, warping of the plastic battery opening often occurs in the absence of the cap. This issue can be remedied by applying medium heat with a heat gun or hair dryer completely around the battery opening, but not TOO much. *Be sure to remove the batteries before attempting this procedure!* Once softened the cap can be used to round the opening once more by manipulating the tabs of the cap into the opening and allowing the warmed plastic to cool, but this process must be done quickly as the plastic cools quickly. Many Tommy-Ray Space Guns no longer work. There is little to no way to service them because of the adhesive and type of plastic used. They are literally fused together and I've yet to successfully separate one to date. With that being said, they are still excellent display toys when complete and REALLY look good with the matching helmet and box.
-
Irwin 'Man From Mars' Replacement Bubble Helmet A two piece bubble helmet for the Irwin 'Man From Mars' wind up toy from the 1950's. The helmet comes in two pieces as shown and installs just as the original. There are 4 alignment pins on one helmet half and 4 corresponding holes on the other half. A small bit of super glue to each pin will secure the helmet to the spaceman. There is a hole in the top of the helmet for the rubber antenna, which is also available here on this site. Many of the original bubbles are missing, cracked and re-glued or have become clouded or crazed from age. My new bubble is guaranteed to be an excellent fit and remain clear for years to come!
-
This is a brand new exact reproduction of the Pyro X-300 Space Cruiser manufactured by Uncle Al's Toys. A complete original toy was disassembled and molds were made of the individual pieces. As with the original, it features rolling wheels and an astronaut figure. These spaceships can be made in any color combination and more will be available here and on Ebay. The Pyro X-300 Space Cruiser is a beautiful, classic 1950's design that has withstood the test of time in it's popularity. Many different companies across the globe have taken this rocket and added there own design elements. Kleeware and Tudor Rose are two companies that offered this toy in color varieties. T. Cohn offered the rocket with their tin Space Port that would launch the rocket out of the garage and across the floor. Values continue to climb on original toys, making them somewhat unaffordable to new collectors which is why I decided to recreate the toy for those collectors. I will be making other X-300 variations myself with features such as battery operated lighting and friction/sparking drive.
-
A replacement red button for the battery-operated sound box. If your Monkeemobile is missing this button, the sound mechanism is very hard to operate. Just a drop of Super Glue will bond the replacement button to the stem. The button is translucent red, just like the original. Many additional parts are available for this toy. Please keep looking at Uncle Al's!
-
This PLASTIC WING for the 1/10 scale battery operated Asahi Junior Toys Gold Leaf Lotus 49 Ford F-1 race car. The wing was created from a mold taken from an original toy part and is an exact copy of the original, perfect fitting and strong material. Many of these cars are missing this accessory and now there is this excellent replacement available from Uncle Al's Toys. Please note that this listing is for ONE WING ONLY - NO CAR. These parts are in stock and ready to ship!
-
A wonderful, 1999 Fisher-Price Dino-roarrr TYRANNOSAURUS REX, mint carded toy. It is a newer version of the popular Fisher Price 'Puffalump' dinosaur. Dino-roars have a soft, squeezable body and makes a high shrill noise that slowly descends into a cooing, 'Aaah' sound. A fun and appealing toy for small children. This vivid orange Dino-roarrr was purchased brand new in 1999 and was kept in sealed stored condition. When squeezed, he opens his mouth and out comes the sound of a very content Dino-roarrr! Also available is an equally fun Triceratops in vivid PURPLE color. These toys are fabulous for collectors or for those parents who want to give their little ones cherished vintage gifts. Very few left in this condition that aren't already in private collections.
-
A wonderful, 1999 Fisher Price 'Dino-roarrr' TRICERATOPS, mint carded plush toy. It is a newer version of the popular Fisher Price 'Puffalump' dinosaur. I nearly had a cow the first time my wife and I came upon our first 'Puffalump' dinosaur. He was so soft and squeezable. I just wasn't expecting the sound that came from the toy when squeezed. It starts out as a high shrill noise and slowly descends into a cooing, 'Aaah' sound. An absolute gas and I was immediately sold by its appeal to small children. The toy was purchased brand new in 1999 and it has been kept in sealed stored condition. This guy comes to you in vivid PURPLE. When squeezed, he opens his mouth and out comes the sound of a very content Dino-roar! Also available is and equally fun Tyrannosaurus Rex in vivid ORANGE color. These toys are fabulous for collectors or for those parents who want to give their little ones cherished vintage gifts. Very few left in this condition that aren't already in private collections.\
-
This is a replacement WIND UP KEY for the CIJ Alfa P2 Racer , made in France. All dimensions for the replacement were taken from an original key. The brass shaft diameter and the steel winding handle are of the same thickness as the original key. The length is correct and allows winding without interference or binding near the back wheel of the toy. If you look closely at the pictures, I also drilled and inserted a brass locking pin which secures the handle to the shaft, just as original. These can be ordered with black painted steel winding handle or aged patina. Please specify when ordering. These are in stock in both variations shown here. Make your Alfa complete with one of these rare keys.
-
<span style="float: none; background-color: #ffffff; color: #333333; cursor: text; font-family: Georgia,'Times New Roman','Bitstream Charter',Times,serif; font-size: 16px; font-style: normal; font-variant: normal; font-weight: 400; letter-spacing: normal; text-align: left; text-decoration: none; text-indent: 0px;">New from Uncle Al's is this great set of replacement TAIL LIGHTS for the Bandai 1959 Cadillac tin friction automobile. You get a left and a right to complete the rear end of your car. Some modeling experience is helpful, but if you're doing this yourself you're probably already quite handy! These are very small and fit the 11 1/2" version of the car. Bandai 1959 Cadillac replacement tail lights, sold in pairs and currently only available HERE! These require the installer to trim off the mold pin in order to properly fit into the plated trim on the toy and are a PERFECT FIT replacement made from a mold of the original parts. My replacements are shown installed on one of my Cadillacs!
-
A replacement Beacon Lens for the Yonezawa, Cragstan DC-7 Automatic Multi-Action Prop-Jet Plane. Created from a mold of an original toy part to ensure the greatest accuracy. A drop of super glue will hold it in place and is guaranteed to be a perfect fit! This toy was manufactured with many different features and airline names. We offer a wide variety of additional replacement parts. Common to all the planes is the white antenna mounted behind the cockpit. Also available are the white propellers in both round or square tip, and red nacelle engine covers.
-
1950's Yonezawa Japan Atom Jet Racer, 30 " friction space concept car replacement two piece cowl lights, molded from the original parts for a perfect fit and perfect color. These are available with either flat face orange cone or pointed orange cone with gray plastic back end. The original toy cone parts have a fine male and female thread that screw together. My replacements work EXACTLY the same way to provide you the greatest authenticity when restoring your collectible Atom Jet!
-
The Toy Masters Space Survey Jeep friction toy sometimes comes with a tin astronaut driver, but always has a telescope that swings back and forth. A shaft protrudes vertically through the rear of the telescope and the antenna will rotate 360 degrees when mounted atop that shaft. Uncle Al's also fabricates the replacement telescope and cradle assembly for this toy.
-
Replacement front bumper cones for the rare Sensco Japan Future Car or the TV Space Patrol friction car. The TV Space Patrol Car cones come with the slight teal blue tint as original and the Future Car comes clear green tinted as original. Please specify which you need at the time you order. These cones are sold only in pairs for a perfect color match on your rare toy. TV Space Patrol Car tin mounting rings are sold separately.
-
Masudaya battery operated Queen of the Sea replica radar antenna. Available ONLY through Uncle Al's Toys is this plastic resin replica antenna available in light blue, dark blue and white. (Please specify color when ordering.)The antenna mounts on a rod protruding from the upper deck of the toy and is nearly always lost. Also available for the Queen is a replica tin flag and the clear light bulb domes for the upper deck! Time to complete your large cruise ship and increase it's value!
-
Marx Dick Tracy Squad Car / Army Command Car / Fire Chief Car replacement siren light. This fabulous replacement light is exactly like the original and comes completely wired with socket and bulb. Just attach and install as original. The rear housing can also be molded in olive drab on request but standard in stock is yellow/red
-
Made exactly like the original, this tin tower will fit perfectly should your Space Station be lacking. My tower also comes with the drive wheel and shaft for the large plastic antenna dish. (sold separately) This tower is used on both the red and blue versions of this toy.
-
New from Uncle Al's Toys! Horikawa Space Station replica Antenna Dish and Mast in Red or Silver Gray. Made exactly like the original this antenna dish and mast will fit perfectly should your Space Station be lacking. My tower (sold separately)also comes with the drive wheel and shaft. These dishes are used on both the red and blue versions of this toy.
-
A hood ornament replica for the Bandai Lincoln Convertible/Coupe. The replica is cast from an original ornament and fits exactly like the original installation. These are in stock and ready to go. *PLEASE NOTE* You may have to disassemble the toy in order to install this part, depending on whether or not the original emblem was pulled completely out or snapped off. If a piece is still showing on the top of the radiator shell, you can carefully trim the emblem base with an Exacto knife and push the remainder of the shaft through the hole. The new ornament can be glued in place rather than opening the toy.
-
This is a new replacement clear plastic canopy for the 1950's Yonezawa Atom Jet Racer, 30" friction car from Japan. The mold for this new canopy was created using the original metal canopy frame for a PERFECT FIT. Original canopies have tended to shrink and crack over time. This excellent, custom vacuum formed canopy is GUARANTEED to fit as perfectly as original. We have many other custom parts for the Atom Jet such as cowl lights (both versions of pointy and flat), tail cone lights, siren boxes and the most ACCURATE replacement fin on the planet!
-
Tamiya Harley-Davison FLH Classic with Sidecar 1/6 Scale, kit #16018. This kit is 100% complete unbuilt/unstarted and was opened only by me since new. A giant model containing many metal, rubber and plastic parts with tremendous, large scale detail and authentic working details. A MUST for Harley collectors!
-
This is the Metaluna Mutant from the movie 'This Island Earth' back in the 1950's, I believe. This is a latex mask, very heavy (just under 10 pounds) and is approximately 20" tall. I believe this is the first version since 2000 and is increasingly more difficult to find.
-
This is a rare Walt Disney World, Epcot Mission Space X-2 Experimental Exploration Spacecraft battery-operated toy that was only available at the theme park gift shop many years ago, and the toy is no longer produced. There are three buttons on the back of the toy that make sound as well as flashing red LED lights in the engines and leading edges of wings and fins. I tried to capture the colors but they are much more vivid in person. An extremely well-made toy that also features an opening cockpit and retractable rolling landing gear. I have a demonstrator to play with and three in their original boxes for sale. These are highly sought after by space toy collectors and Disneyana collectors alike.
-
Beautiful vintage 1950's Japan Masudaya 'Space Giant' flying saucer battery operated toy in tremendous condition. This large (12") diameter toy requires 3 'D' cell batteries and features Bump n' Go action, eerie whistling sound and flashing alternating lights on the deck as well as tail fins. A very nice, rare collectible spaceship!
-
Looney Tunes/Warner Bros. 'Marvin's Countdown Rock-O-Tron' Marvin Martian Rocket Ship Game from the movie Space Jamb with Michael Jordan. Cool rocket ship basketball game that stands about 15" tall and comes with a Marvin figure. This was released in 1996.
-
Yonezawa Lincoln Sundeck Convertible XL 500 - This stunning, friction drive concept car is a very rare and desirable TEAL color model. The Sundeck is more commonly seen in a bright red or bright blue color. This is one of the many Yonezawa concept tin friction cars made in the late 1950's. The original tinted canopy is in remarkable original condition and the toy finish has very few minor imperfections. Very little tire wear, excellent friction power and the faint painted script is quite clear on the bottom side of the car. This is one of Uncle's most prized possessions! For those that already own a Sundeck and need a replacement canopy, Uncle Al's Toys is your only source for a replacement!
-
This is a beautiful, all original, Mechanical Bank J&E Stevens BALD EAGLE & Eaglets c. 1883. In wonderful operating condition with the original 'chirp' box. When the coin is inserted into the eagle's beak and the 'snake' lever is rotated, mother eagle tilts forward and drops the coin into the nest with the eaglets. A 'chirp' noise is emitted to complete the coin drop cycle. The finish on the bank is still vibrant and excellent. A very nice and rare color scheme is hand painted on the bank. As all of the J E Stevens banks are hand painted, no two are alike and greatly adds to their collectability.
-
1957 Tonka TFD Aerial Hook and Ladder Fire Truck No 5, highly prized by Tonka collectors. The pressed steel fire truck is in original, unrestored condition, shows light playwear and is complete with ladders. A must have for your pressed steel toy collection! Discover the Best Vintage Toys Online Find the Best Vintage Toys from Various Product Categories Best Selling Toys | Action Figure Toys | Antique Toy Parts | Battery Operated Toys | Custom Toys | Diecast Toys | Dinosaur Toys | Holiday Toys & Decorations | Original Toy Parts | Other Toys & Antiques | Remote Control Toys | Space Toys | Toy Banks | Toy Car | Toy Guns | Toy Model Kits | Toy Replacement Parts | Toy Robots | Transportation Toys | Wind Up Toys Join us on social media. Facebook | Instagram | LinkedIn | Twitter
-
1954 Tonka MFD Arial Ladder Fire Truck No 5, highly prized by Tonka collectors. This is the first production year that the Arial Ladder. The pressed steel fire truck is in original, unrestored condition, shows light playwear and is complete with ladders. This is a beautiful and rare first edition toy. A must have for your pressed steel toy collection!
-
1954 Tonka Wrecker Tow Truck Official MM (Mound, Minnesota) Service, a must have by Tonka collectors. This is the first year of the Ford style, round fendered truck toys that Tonka will produce. The pressed steel wrecker is in extremely nice, original condition and shows light playwear. This toy has never been cleaned (other than dusting) and has never been polished so the extraordinary patina is tremendous! A great piece for your pressed steel toy collection! Discover the Best Vintage Toys Online Find the Best Vintage Toys from Various Product Categories Best Selling Toys | Action Figure Toys | Antique Toy Parts | Battery Operated Toys | Custom Toys | Diecast Toys | Dinosaur Toys | Holiday Toys & Decorations | Original Toy Parts | Other Toys & Antiques | Remote Control Toys | Space Toys | Toy Banks | Toy Car | Toy Guns | Toy Model Kits | Toy Replacement Parts | Toy Robots | Transportation Toys | Wind Up Toys Join us on social media. Facebook | Instagram | LinkedIn | Twitter
-
A 1957 Tonka Fire Truck Pumper with Fire Hydrant Pressed Steel highly sought after by Tonka collectors. The pressed steel truck is in original condition and shows light playwear. It is complete with the hoses, ladders, and fire hydrant. Add this beautiful piece to your pressed steel collection today! This is the perfect companion piece to the 1957 Tonka Arial Ladder Fire Truck. With the addition of the Tonka Rescue Metro Van, you'll have the complete B-212 Fire Rescue Set that was available for 1957!
-
Freaky Geek Monster Frankenstein Gemmy Products with Original Box, a wonderful, time-tested Halloween favorite! The hip-shaking, dancing Frankenstein monster uses 'AA' batteries for power and also features moveable arms and mouth. This is a great addition to your Halloween decoration collection! This is a brand new, unused item from Uncle's personal collection.
-
1929 Buddy L #208 Transportation Company Bus, 100% Original - This is one of the finest, all original, heavy pressed steel toy busses that you will ever see. This Buddy L Transportation Coach is in incredible, 100% original, unrestored condition with the original leather pull cord still attached. At an impressive 30" length, it's one of the largest toy busses ever produced. The toy has minor surface imperfections and there is mild wear to the original aluminum wheels. As this was also considered a 'ride on' style toy, the steerable front wheels were operated by the riding child turning the spare tires on either side of the front cowl. The toy features steerable wheels and both left and right front opening doors. The original paint is time aged but remarkably few chips or imperfections. The original decals are at 90%. Plated surfaces are tarnished and left unrestored. This is a true museum piece that was acquired from a reputable, world travelled dealer of fine antiquities. There are no disappointments here. Additional photos are available on request and please, only serious inquiries answered. This toy can be purchased through direct contact ONLY and acceptable payment will be by bank draft, direct wire transfer or verified personal check.
-
RARE, Energy Miser novelty toy was created by Poynter Products in 1978. The toy is battery operated. Check out the video and watch how the Energy Miser hand reaches out to turn off the switch handle each time it is turned on. An extremely hard to come by Poynter Products exclusive! This unit comes as shown, without its original box.
-
This is a RARE, Full House Productions (2011) Jack In The Boxxx Limited Edition Series 1. As you turn the crank, the melody XXX plays until the jester pops up with a 1 finger salute. A very naughty and impossible to find gift! I believe this was a very short-lived company, as there is no current information regarding their current status or other products offered, making this a truly unique item. Risque humor very reminiscent of the Poynter Products Novelty Company.
-
Warner Bros, Scooby Doo Vampire Plush is 23" tall and a great decoration for Halloween. He is brand new with tags.
-
Windsor Drinkers savings bank with the original box. A battery-operated toy produced in the 1960s. The toy is complete with the rare, original coin. Watch the man at the bar take a drink when the coin slides into the register. This toy is in excellent working condition.
-
Buddy L Mechanical Scarab Windup Automobile. A pressed steel toy measuring about 10" long with a wind-up motor on the rear wheels.. Be sure to check out the video. This is a very unique and imaginative toy produced by Buddy L in the mid 1930's. The toy is in very good to excellent operating condition, with original paint and Scarab decals on the doors. The toy shows moderate playwear, with numerous scratches overall but the plated trim is clean. This is an extremely well made and unusual subject, collectible toy. To operate the toy, swing the stop lever to secure the rear wheels from rotating and wind the mechanism. Place the toy on the floor, release the stop lever and watch the Scarab move in a forward direction. As the mechanism continues its cycle, a small wheel drops at the rear of the mechanism causing the Scarab to turn in another direction.
-
A Smoky Bear remote-control, battery-operated toy made by SAN Co. (Marusan) of Japan in the 1950s. Smoky has 4 actions. He walks forward while raising and lowering his pipe. The pipe lights up and he exhales smoke from his mouth. The battery box is clean! The body is plush with tin litho parts and accessories. Check out the video of this marvelous toy. As with many American copywritten, iconic names and institutions, Smokey the Bear was not immune from shameless hustle. Marusan got around the legal aspects of this by removing the 'e' from the Smokey name and by labeling the toy's hat with the word 'Pioneer', all the while mimicking the Smokey the Bear full wardrobe, complete with shovel! The ultimate in irony, Smoky Bear has a light up pipe and blows smoke like a chimney!
-
Sonsco Red Gulch Bar, Western Badman Battery Operated Toy in excellent working condition. The Western Badman, Red Gulch Bar battery operated toy is a great, all-time favorite and prized collectible by vintage battery toy enthusiasts. The toy operates with two 'D' cell batteries inserted into the base. The Red Gulch Bar, aka: Western Badman is from the 1950's and comes with three reproduction bottles and reproduction beer mug. Uncle Al has also re-created the Badman's holster and belt to the dimensions of the original toy!
-
Peter Porpoise Puzzle Toy by Child Guidance Toys. There are 12 unbreakable, colorful pieces that create a cute porpoise when assembled correctly. Peter Porpoise also floats in water. . The toy is in great shape. The box shows wear and has been taped in spots.
-
This is an extremely nice 1960's TN Nomura Piston Tractor with a lighted engine, very near mint in the original box. The toy features forward, neutral, reverse and stop settings with a turn of the chrome knob on top of the tractor. The clear engine block has a red light inside that waves back and forth, simulating busy action. The toy requires two 'D' cell batteries for operation. Please see our video of this toy in motion. The original box is in very good condition and comes with all of the original insert materials. This is an excellent choice for your construction toy collector.
-
Vintage Yone SKELETON COFFIN COIN BANK Wind Up Toy. A fun Halloween decoration in like new excellent working condition. Wind it up and watch the skeleton hand reach out and grab the coin. Check out the video in the picture gallery. The Coffin Bank is in excellent working condition, retaining its original felt shroud. The lithograph is brilliant and crisp with only a couple minor imperfections. This item is virtually unused, (except for myself and my lovely photographer to shoot the video). The original box has minor wear to the outside edges from shelf storage. As happened with so many toy boxes, this box bottom was used and labeled with handwriting as shown in the picture. Every toy has a story to tell! No disappointments!
-
Yone, Japan Coffin Bank Wind Up Tin Toy with Original Box. A fun Halloween decoration in like new excellent working condition. Wind it up and watch the skeleton hand reach out and grab the coin. Check out the video in the picture gallery. The Coffin Bank is in excellent working condition, retaining its original felt shroud. The lithograph is brilliant and crisp with only a couple minor imperfections. This item is virtually unused, (except for myself and my lovely photographer to shoot the video). The original box has minor wear to the outside edges from shelf storage. No disappointments!
-
Texaco Fire Chief, Fire Engine Truck, 1960s AMF WEN MAC Made in USA with the original box and original parts. The fire truck was made in the USA in the early 1960's. This toy was a premium purchase that was available at Texaco Gasoline Service Stations and was wildly popular due to its impressive 25" in length. The toy comes with a garden hose attachment. When used in conjunction with the two rubber side mounted hoses and attached at the pump point on the side of the engine, the water cannon on the rear will dispense a spray for realistic play! A very nice condition toy that has never been used with water. The metal is crisp and rust free. This makes for an incredible display piece as it is in very near mint condition with its illustrated accessory bag.
-
A replacement mug for the Sonsco Western Badman, Red Gulch Bar battery operated toy produced exclusively for the Badman toy. The toy originally came with 1 mug as shown but is often missing from the toy when it comes up for sale. The replacement mug is a copy made from an original mug and has the molded boss at the back of the mug handle for insertion into the cowboy's hand. This part is available nowhere else! You can find the 3-piece bottle set in our replacement parts category.
-
Nylint Milwaukee Tools Semi Truck and Trailer new in box, #345-Z. The truck's cab is made out of plastic and pressed steel. The trailer is all pressed steel. The tires are branded Firestone. Nylint Toys produced toy semi-truck toys with Firestone branded tires until a major safety recall of real tires prompted discontinued use. Nylint then replaced the Firestone script with their Nylint brand. Nylint Trucks with the Firestone script are now highly sought after because of the controversy surrounding the brand. Our offering comes from Uncle's private collection and is in mint, boxed condition. #345-Z is the designation for special markets. This truck was sold through Berland's House of Tools in Illinois.
-
Nylint "Do It Best" Home Improvement Semi Truck and Trailer new in box. The truck's cab is made out of plastic and pressed steel. The trailer is all pressed steel. The side of the trailer reads DO IT BEST home improvement products, Best Quality, Best Value, Best Selection. The side and front of the cab reads DO IT BEST ALL ACROSS AMERICA. I purchased this example from the 'Do It Best', Roselle (Illinois) Lumber Company on Irving Park Road in the late 1990's. There is a special vertical Roselle Lumber magnetic business card attached to the front of the trailer. This almost qualifies as a private label toy, never removed from its original packaging.
-
Child Guidance Mechanical Robot No. 8260 new in original plastic box. A child's introduction to mechanics. Wind it up and watch it run! The robot can be disassembled and is color-coded for easy reassembly. The Child Guidance series of Mechanical Toys are tremendous teaching tools. Children learn the science behind how things work, by watching the operation of gears working together to create action and movement. You'll find the rarest examples of these toys right here!
-
1956 Vintage Bandai 579 Messerschmitt KR200 Bubble Top Tin Toy Friction Car, in very nice, played with condition. The friction drive works well, and the top can be opened to view the interior.
-
Child Guidance Mechanical Pay Phone No. 8270 new in original plastic box. Complete with coins. A child's introduction to mechanics. Wind it up and watch it run! The pay phone can be disassembled and is color-coded for easy reassembly. The Child Guidance series of Mechanical Toys are tremendous teaching tools. Children learn the science behind how things work, by watching the operation of gears working together to create action and movement. You'll find the rarest examples of these toys right here!
-
Child Guidance Mechanical V-8 Engine, No. 8280. A child's introduction to mechanics. Wind it up and watch it run! The engine can be disassembled and is color-coded for easy reassembly. The Child Guidance series of Mechanical Toys are tremendous teaching tools. Children learn the science behind how things work, by watching the operation of gears working together to create action and movement. You'll find the rarest examples of these toys right here!
-
Child Guidance Mechanical Helicopter No. 8200. A child's introduction to mechanics. The gears turn, the motor spins and it makes a realistic sound. Wind it up and watch it run! The helicopter can be disassembled and is color-coded for easy reassembly. The Child Guidance series of Mechanical Toys are tremendous teaching tools. Children learn the science behind how things work, by watching the operation of gears working together to create action and movement. You'll find the rarest examples of these toys right here!
-
A child's introduction to mechanics. Wind it up and watch it run! The train can be disassembled and is color-coded for easy reassembly. The Child Guidance series of Mechanical Toys are tremendous teaching tools. Children learn the science behind how things work, by watching the operation of gears working together to create action and movement. You'll find the rarest examples of these toys right here!
-
Dimestore Dreams Tonette No. 30600 mint in the box. Includes instruction booklet with 50 tunes. This item is new and unused.
-
This listing is for a 1957 Tonka Hydraulic Dump Truck. The copper brown truck shows some play wear and the piston for the truck bed does not work. Still a wonderful display piece at a great price. Please review the photos as they are part of the description and show the condition detail. Discover the Best Vintage Toys Online Find the Best Vintage Toys from Various Product Categories Best Selling Toys | Action Figure Toys | Antique Toy Parts | Battery Operated Toys | Custom Toys | Diecast Toys | Dinosaur Toys | Holiday Toys & Decorations | Original Toy Parts | Other Toys & Antiques | Remote Control Toys | Space Toys | Toy Banks | Toy Car | Toy Guns | Toy Model Kits | Toy Replacement Parts | Toy Robots | Transportation Toys | Wind Up Toys Join us on social media. Facebook | Instagram | LinkedIn | Twitter
-
Rosbro Halloween Witch on Motorcycle Candy Container - Rosbro Halloween candy containers come in a variety of subjects and styles. The Motorcycle Witch is a classic favorite! The toy measures 7" long, 5 1/2" in height and 2 1/2" in width, making her one of the larger Rosbro collectibles. Our offering is in excellent physical condition but does show paintwear to the black paint, which is common on played with items like this. Important places to look for damage on the Motorcycle Witch are the bottoms of her shoes, the green wheel axel pins and the edges on the pumpkin candy holder. All are perfect on this example. These are constantly increasing in value and an extremely good investment!
-
Rosbro Halloween candy containers come in a variety of subjects and styles. The Halloween Cat on Wheels is a RARE collectible! The toy measures 6" in height and 4 1/4" in width, and about 3" in depth. Our offering is in excellent physical condition and shows minimal to no paint wear. Important places to look for damage are the extended arm, the hand that holds the small pumpkin and the small pumpkin handle. All are perfect on this example. These are constantly increasing in value and an extremely good investment! No disappointments here and an absolute MUST HAVE for kitty and cat collectors as well as Halloween fans!
-
A 1957 Tonka "Big Mike" Hydraulic Dump Truck highly prized by Tonka collectors. The truck is in original condition, shows light play wear and both hydraulic pistons are freely working. The original Big Mike is a 1957 offering depicting the Ford style cab. Later versions of Big Mike are the square fender 1958 and the 1959 Landrover that has wide, solid plastic wheels. The truck originally sold as a standalone toy and as part of the 1957 Road Builder Set. This toy is also available occasionally on eBay as a reproduction toy by Don DeSalle. This Tonka will be the highlight your pressed steel toy collection!
Discover the Best Vintage Toys Online
Find the Best Vintage Toys from Various Product Categories Best Selling Toys | Action Figure Toys | Antique Toy Parts | Battery Operated Toys | Custom Toys | Diecast Toys | Dinosaur Toys | Holiday Toys & Decorations | Original Toy Parts | Other Toys & Antiques | Remote Control Toys | Space Toys | Toy Banks | Toy Car | Toy Guns | Toy Model Kits | Toy Replacement Parts | Toy Robots | Transportation Toys | Wind Up Toys Join us on social media. Facebook | Instagram | LinkedIn | Twitter -
This is a 1954 Tonka Livestock Truck and Trailer in extremely nice original condition with signs of light play wear. This marks the first year of production for this toy, as indicated by the straight cut metal at the base of the doors on the cab. The toy measures 24" long. The toy is 100% original and complete with dolly wheels and rear trailer gate ramp. It has very minor paint scratches and scrapes but is in overall very fine condition for a 74-year-old toy. This is a must have for any vintage Tonka collector and has been a part of my personal collection for many years. Part of the Livestock Series, the truck will make a wonderful addition to any pressed steel collection.
Discover the Best Vintage Toys Online
Find the Best Vintage Toys from Various Product Categories Best Selling Toys | Action Figure Toys | Antique Toy Parts | Battery Operated Toys | Custom Toys | Diecast Toys | Dinosaur Toys | Holiday Toys & Decorations | Original Toy Parts | Other Toys & Antiques | Remote Control Toys | Space Toys | Toy Banks | Toy Car | Toy Guns | Toy Model Kits | Toy Replacement Parts | Toy Robots | Transportation Toys | Wind Up Toys Join us on social media. Facebook | Instagram | LinkedIn | Twitter -
This is an extremely nice, played with condition, 1957 Tonka No.16 Gas Truck. This is one of my favorite Tonka Trucks from my private collection. It is complete with all three of its access doors. A very nice addition to your Tonka or Pressed Steel collection! Discover the Best Vintage Toys Online Find the Best Vintage Toys from Various Product Categories Best Selling Toys | Action Figure Toys | Antique Toy Parts | Battery Operated Toys | Custom Toys | Diecast Toys | Dinosaur Toys | Holiday Toys & Decorations | Original Toy Parts | Other Toys & Antiques | Remote Control Toys | Space Toys | Toy Banks | Toy Car | Toy Guns | Toy Model Kits | Toy Replacement Parts | Toy Robots | Transportation Toys | Wind Up Toys Join us on social media. Facebook | Instagram | LinkedIn | Twitter
-
This is a 1954 Tonka Jewel Tea Co. Truck and Trailer Pressed Steel toy. This marks the first year of production for this toy, as indicated by the straight cut metal at the base of the doors on the cab. The toy measures 24" long. The toy is essentially 100% original, with the exception of the repainted fuel tanks behind the cab. It has minor paint scratches and scrapes but is in overall very fine condition for a 74-year-old toy. This is a must have for any vintage Tonka or private label collector and has been a part of my personal collection for many years. The Jewel Tea Company operated a door-to-door delivery business from 1899 to 1981 delivering groceries and other household items from their catalog. Tonka partnered with companies like Jewel to create private label toys.
-
Thimble-Drome Curtiss Pusher by L.M. Cox. The 1911 vintage style, engine powered airplane is a ready to assemble flying model. Complete with a T-D babe bee engine. The Thimble-Drome Curtiss flying model was only produced for one year, (1960/61) due to its delicate nature and inability to survive smooth landings. The model kits came with a parts re-ordering form that I assume was used extensively by model flyers! One of my favorite all-time kits that is extremely well made and has excellent detail. The pilot figure comes with lead weights that fit inside his legs and acts as the counterbalance to the power of the gas, .029 engine. This kit is becoming exceedingly rare to find in any condition, but this kit offered is 100%original, including the decal sheet. I offer replacement waterslide decals for this model elsewhere on our site.
-
Ford Gas-Turbine Van Friction Motor by M.K.K. Powered by a friction motor. Quality construction, heavy gauge metal. A nicely constructed reproduction box. Known as the Ford Gas Turbine, Experimental Superhighway Truck, this vehicle was designed to be the cutting edge of hauling transportation efficiency in 1964. It featured 600 H.P. and a cruising range of 600 miles. Our featured toy is in lightly played with condition, strong friction motor and opening rear trailer door. It's missing one light from the roof of the trailer (at the moment. I'll see if I can find it or make a new replacement.) This is an extremely collectible toy and had to come by in such nice shape.
-
Revell Mobilgas Truck Plastic Model Kit 1995, Kit No. 1420. Easy to build and ready to paint. Features two figures, scaled engine, movable cab, and chassis.
-
New in original plain box. A 1920s style, polished aluminum ashtray measures about 3.5” x 5.75”. A great collectible most likely made in the Prohibition Era. Selling AS IS since the age is unknown, but assuming during the 1950's. There are many versions of this novelty available in different metals, ceramics and Bakelite. I acquired this particular item from the Pomona, California Hot Rod Swap Meet in the early 1980's.
-
A Gemmy Triumph the Insult Comic Dog Plush Toy in the box. Press his foot and listen to Triumph's insults as he moves his mouth to the words. This Gemmy Original features Synchro-Motion, a cutting-edge animation technology that synchronizes the motion of the mouth to words or songs, allowing an inanimate figure to come to life before your eyes. A great novelty toy for your collection or as a gift.
-
The Carousel Texaco Gas Pump Gumball Machine Bank looks like a vintage style Texaco gas pump. Quality construction, made of die cast metal with a safe plastic globe. The bank stands 21" tall and the globe on top lights up. The globe is battery powered and works. The globe holds up to 1.5 lbs of gumballs or other types of treats like candy or peanuts. The coin mechanism accepts pennies, nickels, dimes and quarters. Or set it for free dispensing. This item is new and was opened only to photograph and verify light function. This is an excellent collectible for your Texaco oil enthusiast or gas and oil memorabilia collector!
-
This RARE, Yonezawa Alfa #53 Racer comes from the private collection of a dear friend who has been collecting toy cars for over 50 years. This is a nearly flawless, RARE race car and is 100% all original. The friction motor mechanism is strong and smooth. It is huge at 11" in length and 4 1/2" high to the top of the driver's helmet. This is an incredible, rare toy featuring the extremely unique, painted 'Sports' hubcaps. I don't believe these have been offered on any other Yonezawa car. Zero disappointments and an absolute 'must have' for the serious Indy car, open wheel racer collector. Additional photos will be provided to interested buyers. Please feel free to ask. Due to the nature of this item, interested buyers need to contact me for purchase. Payment may be made by cash, good personal check, money order / cashier’s check or bank wire transfer ONLY. Arrangements can be made for personal pick up or professional packaging and shipping. The price for this toy is $4,500.00 or you are welcome to negotiate an offer.
-
This RARE, Yonezawa Racer comes from the private collection of a dear friend who has been collecting toy cars for over 50 years. This is a nearly flawless, RARE race car and is 100% all original. The friction motor mechanism is strong and smooth. It is 11" in length and 4 1/2" high to the top of the driver's helmet. An excellent companion piece to the Yonezawa #53 racer also listed here at Uncle Al's. Zero disappointments and an absolute 'must have' for the serious Indy car collector. Additional photos will be provided to interested buyers. Please feel free to ask. Due to the nature of this item, interested buyers need to contact me for purchase. Payment may be made by cash, good personal check, money order / cashier’s check or bank wire transfer ONLY. Arrangements can be made for personal pick up or professional packaging and shipping. The price for this toy is $4,500.00 or you are welcome to negotiate an offer.
-
This RARE, Wuco Racer comes from the private collection of a dear friend who has been collecting toy cars for over 50 years. This is a nearly flawless, RARE race car and is 100% all original. The friction motor mechanism is strong and smooth. It is huge at 20" in length and 7" high to the top of the driver's helmet. This is the last known use of the Yonezawa Champion's Racer stamping dies from the 1960's. Prior to this offering by Wuco, the dies were used by Gem of France, who created and sold the #42 Super Racer. As I have owned and sold all versions of this large toy, this particular example is one of the finest I've ever seen. Zero disappointments and an absolute 'must have' for the serious Indy car collector. Additional photos will be provided to interested buyers. Please feel free to ask. Due to the nature of this item, interested buyers need to contact me for purchase. Payment may be made by cash, good personal check, money order / cashier’s check or bank wire transfer ONLY. Arrangements can be made for personal pick up or professional packaging and shipping. The price for this toy is $15000.00 or you are welcome to negotiate an offer.
-
This extremely rare CIJ Alfa Romeo P2 racer was manufactured between the years 1925 and 1935. This comes from the private collection of a dear friend who has been collecting toy cars for over 50 years. Though the toy shows age, the patina is tremendous and is 100% all original. The wind-up mechanism is still functional and strong, the steering operates by the steering wheel and also works. I will include one of Uncle Al's custom-made wind-up keys with the purchase. Please don't confuse this toy with the re-issue Alfa P2. Quality wise, there is no comparison. Many of the details that made the original toy so authentic to the real Alfa P2 racer are missing from the re-issue. Pay particular attention to the wheels, grills and decals and you'll see what I mean. Due to the nature of this item, interested buyers need to contact me for purchase. Payment may be made by cash, good personal check, money order / cashier's check or bank wire transfer ONLY. Arrangements can be made for personal pick up or professional packaging and shipping. The price for this toy is $15000.00 or you are welcome to negotiate an offer.
-
This extremely rare CIJ Alfa Romeo P2 racer was manufactured between the years 1925 and 1935. This comes from the private collection of a dear friend who has been collecting toy cars for over 50 years. Though the toy shows age, the patina is tremendous and is 100% all original. The wind-up mechanism is still functional and strong, the steering operates by the steering wheel and also works. I will include one of Uncle Al's custom-made wind-up keys with the purchase. Please don't confuse this toy with the re-issue Alfa P2. Quality wise, there is no comparison. Many of the details that made the original toy so authentic to the real Alfa P2 racer are missing from the re-issue. Pay particular attention to the wheels, grills and decals and you'll see what I mean. Due to the nature of this item, interested buyers need to contact me for purchase. Payment may be made by cash, good personal check, money order / cashier's check or bank wire transfer ONLY. Arrangements can be made for personal pick up or professional packaging and shipping. The price for this toy is $15000.00 or you are welcome to negotiate an offer.
-
Vintage Handmade Bronze Wiking Ship by Edward Aagaard for Copenhagen Iron Art. This listing is for a patinated bronze Viking Ship made by Edward Aagaard for Iron Art in Copenhagen, Denmark. Beautifully crafted and detailed model with a dragon head on the bow and its tail on the stern. Fourteen individual shields are attached to each side of the boat using ropes made of metal wire. The mast and bench seat are made of wood and the sail is made of copper with a depiction of a bird in the center of the sail. The boat is intact and complete. It is stamped Iron Art Copenhagen on the rudder. Measures approximately 16 inches long and 13.5 inches tall. Wooden boat stand included.
-
Cragstan Great Astronaut Replacement Face Shield. We create the face shield from a mold taken of an original part. This ensures a perfect fitting and authentic replacement part requiring no refinishing or alteration prior to installation. The results are undeniable and sure to please. We also employ the same process when re-creating our tin and metal parts, which we pre-fit to an original toy prior to shipping to you.
-
Masudaya Space Giant Flying Saucer Replacement Tail Fins. We create all of our reproduction parts from a duplicating process using original toy parts (NOT 3D!). This ensures a perfect fitting and authentic replacement part requiring no refinishing or alteration prior to installation. The results are undeniable and sure to please. We also employ the same process when re-creating our tin and metal parts, which we pre-fit to an original toy prior to shipping to you.Your new tail fin lenses are cast in RED or GREEN. They come as a set of left and right lenses. You can order one each color or both the same color. Please specify when you order.
-
AMT ERTL Fiber Optic Lighting Kit. Customize any model kit, picture or other project with AMT's fiber optic lighting accessories kit. Complete with everything except batteries. Opened by Uncle and guaranteed complete!
-
Rare, TN Toys Frankenstein Hand Mechanical Bank Wind-Up made in Japan. Wind the key and watch Frankenstein's hand come out of the house and grab the coin. This bank comes with the even rarer original box. Newer versions of this bank are called 'Mystery Bank'. Frankenstein Hand Mechanical Bank is in excellent working, original condition.
-
Revell Sox & Martin Boss Cuda 1:25 Scale Plastic Model Kit #GC-1800. Features 426 Hemi Super Stock engine, 1-PC hood and scoop, a roll bar cage, bucket seat and keystone wheels. Kit was opened by Uncle Al and is guaranteed complete!
-
Lindberg Little Red Wagon Drag Racing Team 1:25 Static Model Kit SEALED. Features include detailed chassis, engine, tires, and interior. Chrome plated parts. Also features the incredible Dodge race truck hauler!
-
Revell Tommy Ivo Showboat Four Engine Dragster 1:25 Scale Plastic Model Kit #H1285:198. Features four "hot" engines, metal axles, chrome front and rear ends, and 4 M & H Racemaster drag slicks.
-
Jo-Han Sox & Martin Superbird 1:25 Scale Plastic Model Kit #C-1770. The wild super stocker. Molded in white, clear and plated parts.
-
Revell Sox & Martin GTX 1:25 Scale Plastic Model Kit #7365. Molded in white, clear and plated parts. Super Stock drag equipment, Keystone mags and slicks.
-
AMT ERTL Fireball 500 1:25 Scale Plastic Model Kit SEALED. The SSXR Barracuda as seen in the American International Pictures movie "Fireball 500".
Copyright © 2024 Uncle Al's Toys. All rights reserved.
Website design and developed by Concept Infoway LLC