-
Warner Bros, Scooby Doo Vampire Plush is 23" tall and a great decoration for Halloween. He is brand new with tags.
-
Windsor Drinkers savings bank with the original box. A battery-operated toy produced in the 1960s. The toy is complete with the rare, original coin. Watch the man at the bar take a drink when the coin slides into the register. This toy is in excellent working condition.
-
Buddy L Mechanical Scarab Windup Automobile. A pressed steel toy measuring about 10" long with a wind-up motor on the rear wheels.. Be sure to check out the video. This is a very unique and imaginative toy produced by Buddy L in the mid 1930's. The toy is in very good to excellent operating condition, with original paint and Scarab decals on the doors. The toy shows moderate playwear, with numerous scratches overall but the plated trim is clean. This is an extremely well made and unusual subject, collectible toy. To operate the toy, swing the stop lever to secure the rear wheels from rotating and wind the mechanism. Place the toy on the floor, release the stop lever and watch the Scarab move in a forward direction. As the mechanism continues its cycle, a small wheel drops at the rear of the mechanism causing the Scarab to turn in another direction.
-
A Smoky Bear remote-control, battery-operated toy made by SAN Co. (Marusan) of Japan in the 1950s. Smoky has 4 actions. He walks forward while raising and lowering his pipe. The pipe lights up and he exhales smoke from his mouth. The battery box is clean! The body is plush with tin litho parts and accessories. Check out the video of this marvelous toy. As with many American copywritten, iconic names and institutions, Smokey the Bear was not immune from shameless hustle. Marusan got around the legal aspects of this by removing the 'e' from the Smokey name and by labeling the toy's hat with the word 'Pioneer', all the while mimicking the Smokey the Bear full wardrobe, complete with shovel! The ultimate in irony, Smoky Bear has a light up pipe and blows smoke like a chimney!
-
Sonsco Red Gulch Bar, Western Badman Battery Operated Toy in excellent working condition. The Western Badman, Red Gulch Bar battery operated toy is a great, all-time favorite and prized collectible by vintage battery toy enthusiasts. The toy operates with two 'D' cell batteries inserted into the base. The Red Gulch Bar, aka: Western Badman is from the 1950's and comes with three reproduction bottles and reproduction beer mug. Uncle Al has also re-created the Badman's holster and belt to the dimensions of the original toy!
-
Peter Porpoise Puzzle Toy by Child Guidance Toys. There are 12 unbreakable, colorful pieces that create a cute porpoise when assembled correctly. Peter Porpoise also floats in water. . The toy is in great shape. The box shows wear and has been taped in spots.
-
This is an extremely nice 1960's TN Nomura Piston Tractor with a lighted engine, very near mint in the original box. The toy features forward, neutral, reverse and stop settings with a turn of the chrome knob on top of the tractor. The clear engine block has a red light inside that waves back and forth, simulating busy action. The toy requires two 'D' cell batteries for operation. Please see our video of this toy in motion. The original box is in very good condition and comes with all of the original insert materials. This is an excellent choice for your construction toy collector.
-
Vintage Yone SKELETON COFFIN COIN BANK Wind Up Toy. A fun Halloween decoration in like new excellent working condition. Wind it up and watch the skeleton hand reach out and grab the coin. Check out the video in the picture gallery. The Coffin Bank is in excellent working condition, retaining its original felt shroud. The lithograph is brilliant and crisp with only a couple minor imperfections. This item is virtually unused, (except for myself and my lovely photographer to shoot the video). The original box has minor wear to the outside edges from shelf storage. As happened with so many toy boxes, this box bottom was used and labeled with handwriting as shown in the picture. Every toy has a story to tell! No disappointments!
-
Yone, Japan Coffin Bank Wind Up Tin Toy with Original Box. A fun Halloween decoration in like new excellent working condition. Wind it up and watch the skeleton hand reach out and grab the coin. Check out the video in the picture gallery. The Coffin Bank is in excellent working condition, retaining its original felt shroud. The lithograph is brilliant and crisp with only a couple minor imperfections. This item is virtually unused, (except for myself and my lovely photographer to shoot the video). The original box has minor wear to the outside edges from shelf storage. No disappointments!
-
Texaco Fire Chief, Fire Engine Truck, 1960s AMF WEN MAC Made in USA with the original box and original parts. The fire truck was made in the USA in the early 1960's. This toy was a premium purchase that was available at Texaco Gasoline Service Stations and was wildly popular due to its impressive 25" in length. The toy comes with a garden hose attachment. When used in conjunction with the two rubber side mounted hoses and attached at the pump point on the side of the engine, the water cannon on the rear will dispense a spray for realistic play! A very nice condition toy that has never been used with water. The metal is crisp and rust free. This makes for an incredible display piece as it is in very near mint condition with its illustrated accessory bag.
-
A replacement mug for the Sonsco Western Badman, Red Gulch Bar battery operated toy produced exclusively for the Badman toy. The toy originally came with 1 mug as shown but is often missing from the toy when it comes up for sale. The replacement mug is a copy made from an original mug and has the molded boss at the back of the mug handle for insertion into the cowboy's hand. This part is available nowhere else! You can find the 3-piece bottle set in our replacement parts category.
-
Nylint Milwaukee Tools Semi Truck and Trailer new in box, #345-Z. The truck's cab is made out of plastic and pressed steel. The trailer is all pressed steel. The tires are branded Firestone. Nylint Toys produced toy semi-truck toys with Firestone branded tires until a major safety recall of real tires prompted discontinued use. Nylint then replaced the Firestone script with their Nylint brand. Nylint Trucks with the Firestone script are now highly sought after because of the controversy surrounding the brand. Our offering comes from Uncle's private collection and is in mint, boxed condition. #345-Z is the designation for special markets. This truck was sold through Berland's House of Tools in Illinois.
-
Nylint "Do It Best" Home Improvement Semi Truck and Trailer new in box. The truck's cab is made out of plastic and pressed steel. The trailer is all pressed steel. The side of the trailer reads DO IT BEST home improvement products, Best Quality, Best Value, Best Selection. The side and front of the cab reads DO IT BEST ALL ACROSS AMERICA. I purchased this example from the 'Do It Best', Roselle (Illinois) Lumber Company on Irving Park Road in the late 1990's. There is a special vertical Roselle Lumber magnetic business card attached to the front of the trailer. This almost qualifies as a private label toy, never removed from its original packaging.
-
Child Guidance Mechanical Robot No. 8260 new in original plastic box. A child's introduction to mechanics. Wind it up and watch it run! The robot can be disassembled and is color-coded for easy reassembly. The Child Guidance series of Mechanical Toys are tremendous teaching tools. Children learn the science behind how things work, by watching the operation of gears working together to create action and movement. You'll find the rarest examples of these toys right here!
-
1956 Vintage Bandai 579 Messerschmitt KR200 Bubble Top Tin Toy Friction Car, in very nice, played with condition. The friction drive works well, and the top can be opened to view the interior.
-
Child Guidance Mechanical Pay Phone No. 8270 new in original plastic box. Complete with coins. A child's introduction to mechanics. Wind it up and watch it run! The pay phone can be disassembled and is color-coded for easy reassembly. The Child Guidance series of Mechanical Toys are tremendous teaching tools. Children learn the science behind how things work, by watching the operation of gears working together to create action and movement. You'll find the rarest examples of these toys right here!
-
Child Guidance Mechanical V-8 Engine, No. 8280. A child's introduction to mechanics. Wind it up and watch it run! The engine can be disassembled and is color-coded for easy reassembly. The Child Guidance series of Mechanical Toys are tremendous teaching tools. Children learn the science behind how things work, by watching the operation of gears working together to create action and movement. You'll find the rarest examples of these toys right here!
-
Child Guidance Mechanical Helicopter No. 8200. A child's introduction to mechanics. The gears turn, the motor spins and it makes a realistic sound. Wind it up and watch it run! The helicopter can be disassembled and is color-coded for easy reassembly. The Child Guidance series of Mechanical Toys are tremendous teaching tools. Children learn the science behind how things work, by watching the operation of gears working together to create action and movement. You'll find the rarest examples of these toys right here!
-
A child's introduction to mechanics. Wind it up and watch it run! The train can be disassembled and is color-coded for easy reassembly. The Child Guidance series of Mechanical Toys are tremendous teaching tools. Children learn the science behind how things work, by watching the operation of gears working together to create action and movement. You'll find the rarest examples of these toys right here!
-
Dimestore Dreams Tonette No. 30600 mint in the box. Includes instruction booklet with 50 tunes. This item is new and unused.
-
This listing is for a 1957 Tonka Hydraulic Dump Truck. The copper brown truck shows some play wear and the piston for the truck bed does not work. Still a wonderful display piece at a great price. Please review the photos as they are part of the description and show the condition detail. Discover the Best Vintage Toys Online Find the Best Vintage Toys from Various Product Categories Best Selling Toys | Action Figure Toys | Antique Toy Parts | Battery Operated Toys | Custom Toys | Diecast Toys | Dinosaur Toys | Holiday Toys & Decorations | Original Toy Parts | Other Toys & Antiques | Remote Control Toys | Space Toys | Toy Banks | Toy Car | Toy Guns | Toy Model Kits | Toy Replacement Parts | Toy Robots | Transportation Toys | Wind Up Toys Join us on social media. Facebook | Instagram | LinkedIn | Twitter
-
Rosbro Halloween Witch on Motorcycle Candy Container - Rosbro Halloween candy containers come in a variety of subjects and styles. The Motorcycle Witch is a classic favorite! The toy measures 7" long, 5 1/2" in height and 2 1/2" in width, making her one of the larger Rosbro collectibles. Our offering is in excellent physical condition but does show paintwear to the black paint, which is common on played with items like this. Important places to look for damage on the Motorcycle Witch are the bottoms of her shoes, the green wheel axel pins and the edges on the pumpkin candy holder. All are perfect on this example. These are constantly increasing in value and an extremely good investment!
-
Rosbro Halloween candy containers come in a variety of subjects and styles. The Halloween Cat on Wheels is a RARE collectible! The toy measures 6" in height and 4 1/4" in width, and about 3" in depth. Our offering is in excellent physical condition and shows minimal to no paint wear. Important places to look for damage are the extended arm, the hand that holds the small pumpkin and the small pumpkin handle. All are perfect on this example. These are constantly increasing in value and an extremely good investment! No disappointments here and an absolute MUST HAVE for kitty and cat collectors as well as Halloween fans!
-
A 1957 Tonka "Big Mike" Hydraulic Dump Truck highly prized by Tonka collectors. The truck is in original condition, shows light play wear and both hydraulic pistons are freely working. The original Big Mike is a 1957 offering depicting the Ford style cab. Later versions of Big Mike are the square fender 1958 and the 1959 Landrover that has wide, solid plastic wheels. The truck originally sold as a standalone toy and as part of the 1957 Road Builder Set. This toy is also available occasionally on eBay as a reproduction toy by Don DeSalle. This Tonka will be the highlight your pressed steel toy collection!
Discover the Best Vintage Toys Online
Find the Best Vintage Toys from Various Product Categories Best Selling Toys | Action Figure Toys | Antique Toy Parts | Battery Operated Toys | Custom Toys | Diecast Toys | Dinosaur Toys | Holiday Toys & Decorations | Original Toy Parts | Other Toys & Antiques | Remote Control Toys | Space Toys | Toy Banks | Toy Car | Toy Guns | Toy Model Kits | Toy Replacement Parts | Toy Robots | Transportation Toys | Wind Up Toys Join us on social media. Facebook | Instagram | LinkedIn | Twitter -
This is a 1954 Tonka Livestock Truck and Trailer in extremely nice original condition with signs of light play wear. This marks the first year of production for this toy, as indicated by the straight cut metal at the base of the doors on the cab. The toy measures 24" long. The toy is 100% original and complete with dolly wheels and rear trailer gate ramp. It has very minor paint scratches and scrapes but is in overall very fine condition for a 74-year-old toy. This is a must have for any vintage Tonka collector and has been a part of my personal collection for many years. Part of the Livestock Series, the truck will make a wonderful addition to any pressed steel collection.
Discover the Best Vintage Toys Online
Find the Best Vintage Toys from Various Product Categories Best Selling Toys | Action Figure Toys | Antique Toy Parts | Battery Operated Toys | Custom Toys | Diecast Toys | Dinosaur Toys | Holiday Toys & Decorations | Original Toy Parts | Other Toys & Antiques | Remote Control Toys | Space Toys | Toy Banks | Toy Car | Toy Guns | Toy Model Kits | Toy Replacement Parts | Toy Robots | Transportation Toys | Wind Up Toys Join us on social media. Facebook | Instagram | LinkedIn | Twitter -
This is an extremely nice, played with condition, 1957 Tonka No.16 Gas Truck. This is one of my favorite Tonka Trucks from my private collection. It is complete with all three of its access doors. A very nice addition to your Tonka or Pressed Steel collection! Discover the Best Vintage Toys Online Find the Best Vintage Toys from Various Product Categories Best Selling Toys | Action Figure Toys | Antique Toy Parts | Battery Operated Toys | Custom Toys | Diecast Toys | Dinosaur Toys | Holiday Toys & Decorations | Original Toy Parts | Other Toys & Antiques | Remote Control Toys | Space Toys | Toy Banks | Toy Car | Toy Guns | Toy Model Kits | Toy Replacement Parts | Toy Robots | Transportation Toys | Wind Up Toys Join us on social media. Facebook | Instagram | LinkedIn | Twitter
-
This is a 1954 Tonka Jewel Tea Co. Truck and Trailer Pressed Steel toy. This marks the first year of production for this toy, as indicated by the straight cut metal at the base of the doors on the cab. The toy measures 24" long. The toy is essentially 100% original, with the exception of the repainted fuel tanks behind the cab. It has minor paint scratches and scrapes but is in overall very fine condition for a 74-year-old toy. This is a must have for any vintage Tonka or private label collector and has been a part of my personal collection for many years. The Jewel Tea Company operated a door-to-door delivery business from 1899 to 1981 delivering groceries and other household items from their catalog. Tonka partnered with companies like Jewel to create private label toys.
-
Thimble-Drome Curtiss Pusher by L.M. Cox. The 1911 vintage style, engine powered airplane is a ready to assemble flying model. Complete with a T-D babe bee engine. The Thimble-Drome Curtiss flying model was only produced for one year, (1960/61) due to its delicate nature and inability to survive smooth landings. The model kits came with a parts re-ordering form that I assume was used extensively by model flyers! One of my favorite all-time kits that is extremely well made and has excellent detail. The pilot figure comes with lead weights that fit inside his legs and acts as the counterbalance to the power of the gas, .029 engine. This kit is becoming exceedingly rare to find in any condition, but this kit offered is 100%original, including the decal sheet. I offer replacement waterslide decals for this model elsewhere on our site.
-
Ford Gas-Turbine Van Friction Motor by M.K.K. Powered by a friction motor. Quality construction, heavy gauge metal. A nicely constructed reproduction box. Known as the Ford Gas Turbine, Experimental Superhighway Truck, this vehicle was designed to be the cutting edge of hauling transportation efficiency in 1964. It featured 600 H.P. and a cruising range of 600 miles. Our featured toy is in lightly played with condition, strong friction motor and opening rear trailer door. It's missing one light from the roof of the trailer (at the moment. I'll see if I can find it or make a new replacement.) This is an extremely collectible toy and had to come by in such nice shape.
-
Revell Mobilgas Truck Plastic Model Kit 1995, Kit No. 1420. Easy to build and ready to paint. Features two figures, scaled engine, movable cab, and chassis.
-
New in original plain box. A 1920s style, polished aluminum ashtray measures about 3.5” x 5.75”. A great collectible most likely made in the Prohibition Era. Selling AS IS since the age is unknown, but assuming during the 1950's. There are many versions of this novelty available in different metals, ceramics and Bakelite. I acquired this particular item from the Pomona, California Hot Rod Swap Meet in the early 1980's.
-
A Gemmy Triumph the Insult Comic Dog Plush Toy in the box. Press his foot and listen to Triumph's insults as he moves his mouth to the words. This Gemmy Original features Synchro-Motion, a cutting-edge animation technology that synchronizes the motion of the mouth to words or songs, allowing an inanimate figure to come to life before your eyes. A great novelty toy for your collection or as a gift.
-
The Carousel Texaco Gas Pump Gumball Machine Bank looks like a vintage style Texaco gas pump. Quality construction, made of die cast metal with a safe plastic globe. The bank stands 21" tall and the globe on top lights up. The globe is battery powered and works. The globe holds up to 1.5 lbs of gumballs or other types of treats like candy or peanuts. The coin mechanism accepts pennies, nickels, dimes and quarters. Or set it for free dispensing. This item is new and was opened only to photograph and verify light function. This is an excellent collectible for your Texaco oil enthusiast or gas and oil memorabilia collector!
-
This RARE, Yonezawa Alfa #53 Racer comes from the private collection of a dear friend who has been collecting toy cars for over 50 years. This is a nearly flawless, RARE race car and is 100% all original. The friction motor mechanism is strong and smooth. It is huge at 11" in length and 4 1/2" high to the top of the driver's helmet. This is an incredible, rare toy featuring the extremely unique, painted 'Sports' hubcaps. I don't believe these have been offered on any other Yonezawa car. Zero disappointments and an absolute 'must have' for the serious Indy car, open wheel racer collector. Additional photos will be provided to interested buyers. Please feel free to ask. Due to the nature of this item, interested buyers need to contact me for purchase. Payment may be made by cash, good personal check, money order / cashier’s check or bank wire transfer ONLY. Arrangements can be made for personal pick up or professional packaging and shipping. The price for this toy is $4,500.00 or you are welcome to negotiate an offer.
-
This RARE, Yonezawa Racer comes from the private collection of a dear friend who has been collecting toy cars for over 50 years. This is a nearly flawless, RARE race car and is 100% all original. The friction motor mechanism is strong and smooth. It is 11" in length and 4 1/2" high to the top of the driver's helmet. An excellent companion piece to the Yonezawa #53 racer also listed here at Uncle Al's. Zero disappointments and an absolute 'must have' for the serious Indy car collector. Additional photos will be provided to interested buyers. Please feel free to ask. Due to the nature of this item, interested buyers need to contact me for purchase. Payment may be made by cash, good personal check, money order / cashier’s check or bank wire transfer ONLY. Arrangements can be made for personal pick up or professional packaging and shipping. The price for this toy is $4,500.00 or you are welcome to negotiate an offer.
-
This RARE, Wuco Racer comes from the private collection of a dear friend who has been collecting toy cars for over 50 years. This is a nearly flawless, RARE race car and is 100% all original. The friction motor mechanism is strong and smooth. It is huge at 20" in length and 7" high to the top of the driver's helmet. This is the last known use of the Yonezawa Champion's Racer stamping dies from the 1960's. Prior to this offering by Wuco, the dies were used by Gem of France, who created and sold the #42 Super Racer. As I have owned and sold all versions of this large toy, this particular example is one of the finest I've ever seen. Zero disappointments and an absolute 'must have' for the serious Indy car collector. Additional photos will be provided to interested buyers. Please feel free to ask. Due to the nature of this item, interested buyers need to contact me for purchase. Payment may be made by cash, good personal check, money order / cashier’s check or bank wire transfer ONLY. Arrangements can be made for personal pick up or professional packaging and shipping. The price for this toy is $15000.00 or you are welcome to negotiate an offer.
-
This extremely rare CIJ Alfa Romeo P2 racer was manufactured between the years 1925 and 1935. This comes from the private collection of a dear friend who has been collecting toy cars for over 50 years. Though the toy shows age, the patina is tremendous and is 100% all original. The wind-up mechanism is still functional and strong, the steering operates by the steering wheel and also works. I will include one of Uncle Al's custom-made wind-up keys with the purchase. Please don't confuse this toy with the re-issue Alfa P2. Quality wise, there is no comparison. Many of the details that made the original toy so authentic to the real Alfa P2 racer are missing from the re-issue. Pay particular attention to the wheels, grills and decals and you'll see what I mean. Due to the nature of this item, interested buyers need to contact me for purchase. Payment may be made by cash, good personal check, money order / cashier's check or bank wire transfer ONLY. Arrangements can be made for personal pick up or professional packaging and shipping. The price for this toy is $15000.00 or you are welcome to negotiate an offer.
-
This extremely rare CIJ Alfa Romeo P2 racer was manufactured between the years 1925 and 1935. This comes from the private collection of a dear friend who has been collecting toy cars for over 50 years. Though the toy shows age, the patina is tremendous and is 100% all original. The wind-up mechanism is still functional and strong, the steering operates by the steering wheel and also works. I will include one of Uncle Al's custom-made wind-up keys with the purchase. Please don't confuse this toy with the re-issue Alfa P2. Quality wise, there is no comparison. Many of the details that made the original toy so authentic to the real Alfa P2 racer are missing from the re-issue. Pay particular attention to the wheels, grills and decals and you'll see what I mean. Due to the nature of this item, interested buyers need to contact me for purchase. Payment may be made by cash, good personal check, money order / cashier's check or bank wire transfer ONLY. Arrangements can be made for personal pick up or professional packaging and shipping. The price for this toy is $15000.00 or you are welcome to negotiate an offer.
-
Vintage Handmade Bronze Wiking Ship by Edward Aagaard for Copenhagen Iron Art. This listing is for a patinated bronze Viking Ship made by Edward Aagaard for Iron Art in Copenhagen, Denmark. Beautifully crafted and detailed model with a dragon head on the bow and its tail on the stern. Fourteen individual shields are attached to each side of the boat using ropes made of metal wire. The mast and bench seat are made of wood and the sail is made of copper with a depiction of a bird in the center of the sail. The boat is intact and complete. It is stamped Iron Art Copenhagen on the rudder. Measures approximately 16 inches long and 13.5 inches tall. Wooden boat stand included.
-
This is a brand new custom toy manufactured by Uncle Al's Toys and is called Robot Super Cycle. Color stylings are reminiscent of the vintage tin Bandai Super Cycle. Robot Super Cycle features a die cast metal cycle with rubber tires and a tin, seated robot. The cycle and robot are hand embellished with lacquer paints, colored rhinestones and a real, working compass! Each unit is unique and serialized by Uncle Al. Toy measures approximately 7" x 4" x 2.25 ". The Uncle Al version is a special order item and requires a 4 week delivery time.
-
Cragstan Great Astronaut Replacement Face Shield. We create the face shield from a mold taken of an original part. This ensures a perfect fitting and authentic replacement part requiring no refinishing or alteration prior to installation. The results are undeniable and sure to please. We also employ the same process when re-creating our tin and metal parts, which we pre-fit to an original toy prior to shipping to you.
-
Masudaya Space Giant Flying Saucer Replacement Tail Fins. We create all of our reproduction parts from a duplicating process using original toy parts (NOT 3D!). This ensures a perfect fitting and authentic replacement part requiring no refinishing or alteration prior to installation. The results are undeniable and sure to please. We also employ the same process when re-creating our tin and metal parts, which we pre-fit to an original toy prior to shipping to you.Your new tail fin lenses are cast in RED or GREEN. They come as a set of left and right lenses. You can order one each color or both the same color. Please specify when you order.
-
AMT ERTL Fiber Optic Lighting Kit. Customize any model kit, picture or other project with AMT's fiber optic lighting accessories kit. Complete with everything except batteries. Opened by Uncle and guaranteed complete!
-
Rare, TN Toys Frankenstein Hand Mechanical Bank Wind-Up made in Japan. Wind the key and watch Frankenstein's hand come out of the house and grab the coin. This bank comes with the even rarer original box. Newer versions of this bank are called 'Mystery Bank'. Frankenstein Hand Mechanical Bank is in excellent working, original condition.
-
Revell Sox & Martin Boss Cuda 1:25 Scale Plastic Model Kit #GC-1800. Features 426 Hemi Super Stock engine, 1-PC hood and scoop, a roll bar cage, bucket seat and keystone wheels. Kit was opened by Uncle Al and is guaranteed complete!
-
Lindberg Little Red Wagon Drag Racing Team 1:25 Static Model Kit SEALED. Features include detailed chassis, engine, tires, and interior. Chrome plated parts. Also features the incredible Dodge race truck hauler!
-
Revell Tommy Ivo Showboat Four Engine Dragster 1:25 Scale Plastic Model Kit #H1285:198. Features four "hot" engines, metal axles, chrome front and rear ends, and 4 M & H Racemaster drag slicks.
-
Jo-Han Sox & Martin Superbird 1:25 Scale Plastic Model Kit #C-1770. The wild super stocker. Molded in white, clear and plated parts.
-
Revell Sox & Martin GTX 1:25 Scale Plastic Model Kit #7365. Molded in white, clear and plated parts. Super Stock drag equipment, Keystone mags and slicks.
-
AMT ERTL Fireball 500 1:25 Scale Plastic Model Kit SEALED. The SSXR Barracuda as seen in the American International Pictures movie "Fireball 500".
-
Tommy Ivo 4 Engine Dragster - GMP 1:18 Metal Diecast Model. One of 5000 made by GMP in 2006. Bonus DVD included. 1:18 scale. Part No. G1800809. Exact model car intended for adult collectors. Not suitable for children under 14 years of age. Die cast model car.
-
A nice Holdraketa Friction Tin Rocket. Made in Hungary in 1986. A high-quality 'push and go' friction power motor. It runs horizontally until the nose bumps into something triggering another action. The rocket can stand itself upright and the ladder unfolds and drops down to the ground. Inside you will see an astronaut. Box and rocket are in good condition overall. The rocket measures 15.25" long.
-
The "AMT ERTL Ala-Kart 1:25 Scale Model Kit" is a finely detailed replica of the Ala-Kart, a legendary custom hot rod designed by George Barris and Richard Peters.
-
Scale Models 1930 Duesenberg "Speed Line Phaeton" Die Cast Model Kit #4015. Unassembled. Over 150 realistic pieces. Includes English instructions. Piece missing from box lid.</p>
-
A 1960's Marx Colonel Hap Hazard battery operated robot in excellent working condition. The Colonel is sporting new replacement oxygen tanks, a new antenna ring and insulator and a replacement antenna from an unknown source. Hap walks with correct arm movement and spinning, flashing antenna. Haps arms can be positioned as desired. This toy has been thoroughly cleaned and restored to top condition by my professional restoration business, with the exception of minor paint chips, scratches and blemishes. Black boots have minor touch ups as well as other black features on the toy.
-
A replacement brass metal battery holder and lightbulb for the 1960’s Ideal Toys Robert the Robot. The battery holder is a perfect fitting replacement brass part complete with a correct, new bulb. We test fit each battery bar to an original toy robot to ensure an exact fitting installation.
To install, just remove Robert's head and insert the battery into the holder. Install the part into the robot's body cavity and reinstall the head. He is now ready to light up!
-
A new, replacement metal helmet ring and fiber insulator for the Marx Colonel Hap Hazard battery operated Robot and the Marx Hi-Bouncer Moon Scout Robot. These parts are commonly missing from the toy because of aggressive removal of the lighted antenna. The ring and fiber gasket design keeps the lighted antenna from shorting out during operation. We fabricate these parts from original toy parts for dimensional reference. Test fitting each part to the original toy ensures a hassle free, easy installation.
-
A 1960's Marx Colonel Hap Hazard battery operated robot in excellent working condition. The Colonel is sporting new replacement oxygen tanks, a new antenna ring and insulator and a replacement antenna from an unknown source. Hap walks with correct arm movement and spinning, flashing antenna. Haps arms can be positioned as desired. This toy has been thoroughly cleaned and restored to top condition by my professional restoration business, with the exception of minor paint chips, scratches and blemishes. Black boots have minor touch ups as well as other black features on the toy.
-
New hollow cast OXYGEN TANKS for the Marx Hi-Bouncer Moon Scout battery operated robot (set of 2). We create our reproduction parts from a duplicating process using original toy parts (NOT 3D!). This process ensures a perfect fitting and authentic replacement part requiring no refinishing or alteration prior to installation. The results are undeniable and sure to please. We employ the same process when re-creating our tin and metal parts, which we pre-fit to an original toy prior to shipment.Your new oxygen tanks come hollow cast in white with red painted nozzles as shown, JUST AS ORIGINAL!
-
A new battery cover LATCH for the Marx Colonel Hap Hazard battery operated robot. We create our reproduction parts from a duplicating process using original toy parts (NOT 3D!). This process ensures a perfect fitting and authentic replacement part requiring no refinishing or alteration prior to installation. The results are undeniable and sure to please. We employ the same process when re-creating our tin and metal parts, which we pre-fit to an original toy prior to shipment.Your new latch comes with the brass mounting eyelet as shown, JUST AS ORIGINAL!
-
New hollow cast OXYGEN TANKS for the Marx Colonel Hap Hazard battery operated robot (set of 2). We create our reproduction parts from a duplicating process using original toy parts (NOT 3D!). This process ensures a perfect fitting and authentic replacement part requiring no refinishing or alteration prior to installation. The results are undeniable and sure to please. We employ the same process when re-creating our tin and metal parts, which we pre-fit to an original toy prior to shipment.
-
A new CLEAR VISOR for the Marx Colonel Hap Hazard and Hi-Bouncer Moon Scout battery operated robots. We create our reproduction parts from a duplicating process using original toy parts (NOT 3D!). This process ensures a perfect fitting and authentic replacement part requiring no refinishing or alteration prior to installation. The results are undeniable and sure to please. We employ the same process when re-creating our tin and metal parts, which we pre-fit to an original toy prior to shipment.
-
A new ON/OFF SWITCH for the Marx Colonel Hap Hazard battery operated robot. We create all of our reproduction parts from a duplicating process using original toy parts (NOT 3D!). This process ensures a perfect fitting and authentic replacement part requiring no refinishing or alteration prior to installation. The results are undeniable and sure to please. We employ the same process when re-creating our tin and metal parts, which we pre-fit to an original toy prior to shipment.
-
Hubley American Eagle Diecast Fighter / Bomber 4 Blade Propeller Airplane in Original Box. This P-47 die cast metal toy airplane has retractable landing gear and both wings fold up. Made in the USA by Hubley Kiddie Toy. This particular version features a 4-blade propeller. Please see our other offering featuring a two-blade propeller.
-
Remco Motorized Sea Plane in Box, is in excellent working condition. The Sea Plane scoots across the water under its own power, provided by a single 'C' cell battery. The toy also comes with its original box for safe storage or display.
-
Battery-operated, remote-control Crane toy, made in Japan by SKK Toy. SKK would later collaborate with Bandai Toys to create some of the most detailed and mechanically diverse toys of that time. This toy has forward and reverse motion and crane performs lifting action, as well as directional steering via the corded remote. This toy is in excellent, fully working condition and is quite rare to find.
-
Hot Wheels Legends to Life Don “the Snake” Prudhomme Electronic Funny Car. Scale 1:24. Mint in the box. Matching serial number and paperwork. This phenomenal model is truly a work of art and coupled with the finest electronics at the time of manufacturing, it is unparalleled in quality. Some of the many features of this model are a synchronized cassette tape that coincides with the functions of the car; the lifting of the funny car body, firing sound of the engine, which features flashing header pipes and spinning blower belt on the engine front. Spinning tires, wheelie action, count down lights on the starting line tree, just so many features and actions all working at the same time, and the ability to repeat these actions for continued demonstration. The base unit requires 4 'D' cell batteries for operation. I highly recommend only using fresh, brand-new batteries each time this is operated and NEVER leave the batteries in the base. It is NOT recommended for unsupervised children. The display also offers the ability to run the second feature in manual mode and plays the 'B' side of the tape, which is a conversation/interview with the 'Snake' himself. All in all, there is nothing but action packed into this tremendous offering from Mattel. The serialized model matches the packaging and included documentation and is extremely important to maintaining the overall rarity and value of the item. You can be sure that there are very few of these available in this condition and most are in private collections. No disappointments here!
-
Vintage Marx Battery Op Lighted Gas Pump Island in excellent original, working condition.
-
HUGE! Nomura Cessna 310L Friction Airplane with Reproduction Box. Beautiful, large airplane with spinning propellers. The Cessna 310 is also the same model as featured in the early 1960's TV show 'Sky King', a Saturday morning favorite program from my childhood. This toy is really beautiful and one of my personal favorites! There are two planes available and only one comes with a reproduction box. Please deduct $150 for the non-boxed aircraft.
-
Marx Roy Rogers Double R Bar Ranch Tin Litho Bunk House, for the Marx Ranch playset. The house is in excellent condition with no fade to the lithography.
-
See and hear the big bird in action. Watch it load and unload as it prepares for takeoff with roaring sounds and flashing lights. One of my favorite toys to display and operate for family and guests at Christmas, during the 1980's. This is also one of the first Chinese battery toys to enter the US market. An awesome toy that has only been owned and operated by me!
-
Smithsonian Motor-Works. Build a working model of a 4-cylinder engine. Valves rock, spark plugs fire and pistons drive crankshaft. Battery operated moving parts and lights. Includes 35" x 23" color poster.
-
Fao schwarz rocket candy dispenser RED NIB. Motion activated. Easy open top. Plugs in or runs on battery power for use indoors. Fill with your favorite tiny treats or use plastic beads for display play. It differs from a bank as there is no place to insert coins, but a simple wave of your hand will dispense a small amount of treats. Wonderful, retro rocket look that I just had to have in my space toy collection! This is an FAO Schwarz Exclusive item. Approximately 14" tall.
-
Monogram Oval Gas Tank. Includes large oval chrome plated gas tank with embossed ends, filer cap and mounting platform. Custom Accessory for big 1/8 scale model cars or for customizing Monograms Big "T" and other large-scale models.
-
Meridan Kidzlight LED Night Light. Item 10271. Color changing LED and soft continuous white glow. Long lasting LED with night sensor. These things are just awesome and extremely rare to find now. Because they are sealed LED units, they never seem to wear out. I first saw the Meridian UFO night light at my sister's house nearly 15 years ago, which prompted me to go in search of these lights for myself. I ended up purchasing all of the remaining lights I could find and haven't seen any more available for years now. These lights are brand new and come sealed in their original blister card packaging. A must have for your sci-fi, space toy enthusiast or collector!
-
Gemmy Road Rage Racer, BLUE Helmet driver, NIB Battery operated zany toy! As you shift through the gears, the driver shakes and shimmies, and makes a ridiculous sound of a guy imitating a car engine sound going through the shifting gears. Really quite comical and a fun gift for your car enthusiast. This toy is brand new in unplayed condition and never removed from the box. Blue Helmet driver is quite rare!
-
Scale Models 1928 Duesenberg "Town Car" Die Cast Model Kit. Unassembled. Over 150 realistic pieces. Includes English instructions. Piece missing from box lid. Professional modeler Uncle Al has started the construction.
-
Scale Models Packard "Phaeton" Die Cast Model Kit #4017. Unassembled and complete. Over 75 realistic pieces. Includes English instructions. Piece missing from box lid.
-
Unassembled 1/20 scale vintage METAL model kit. These kits are a true delight to build. The modeler should possess intermediate model building skills and will need tools such as miniature drill bits and jewelers files, as well as a small flat blade screwdriver for assembly. Paints and adhesives are also necessary.
-
Unassembled 1/20 scale vintage METAL model kit. These kits are a true delight to build. The modeler should possess intermediate model building skills and will need tools such as miniature drill bits and jewelers files, as well as a small flat blade screwdriver for assembly. Paints and adhesives are also necessary.
-
Gabriel 1912 Model T Delivery Truck Metal Model Kit. Unassembled 1/20 scale.
-
Hubley Model A Station Wagon #4858 Metal Model Kit. Open box but unassembled and complete.
-
GMP Offenhauser 1:6 Scale 255 ci. Engine Model #7504 in used, displayed condition. The display case has some cracks in the top but the engine model itself is in beautiful, mint condition. The original assembly screwdriver is missing.
-
Moon Mobile Scout Wagon Explorer Reproduction Box Sears Exclusive, Moon Mobile Scout Wagon Explorer Reproduction Box. A beautiful, faithfully reproduced high quality box for your collectible toy or for display. The toy was available through the Sears Christmas catalogs during the early 1960's and are amazing, complex toys for the era. The box art on the Sears Exclusives is collectible in its own right.
-
Experience the classic charm of Japanese toy craftsmanship with the Yonezawa Giant Bus Friction Powered Toy. This beautifully designed toy bus, produced by the renowned Yonezawa company, is a perfect example of the quality and creativity that characterized vintage Japanese toys.
-
Yonezawa Giant Bus Friction Powered Toy with Box
-
Jupiter 2 Lost in Space Model Kit 1/35 Scale Sealed Moebius Models 2018. Assembled kit is 18 inches in diameter.
-
Assembled ship is 28 inches in diameter. Dome is removable to reveal detailed command center and crew quarters. Includes 6 in-scale crew members, Altaira, Commander Adams, Robby the Robot and a Transparent ID Monster.
-
The Munsters Model Sealed Kit 5013 by Polar Lights 1997 is a delightful blend of nostalgia and craft. It's not just a model kit; it's a portal to the past, offering a unique way to connect with one of the most cherished television shows of the 1960s. Whether for assembly, display, or as a part of a larger collection, this kit is sure to bring joy to fans of "The Munsters" and model builders alike
-
Anzio Beach Plastic Model Sealed Kit 1968 by Aurora. Complete with 7 Vehicles (4 Tanks, LCT, Raft, Jeep), Bunkers, Ridges, Barricades, Trees, Rocks, Barrels, Boxes, Bales and 50 Combat Troops (American and Axis).
-
The Rat Patrol Plastic Model Sealed Kit 1967 by Aurora. Complete with 15 Battle Actions Figures 2 Rat Patrol Jeeps, 1 German Panzer Tank, 1 German Panther Tank Dimensional Battlefield with Sandbag Bunkers, Sand Dunes and Palm Trees.
-
A sealed Star Trek USS Enterprise NCC-1701 Cut-Away Model Kit 1/650 scale by AMT ERTL Removable sections reveal the inner workings of the original Enterprise. Display base included.
-
A near mint 1950s Tonka Dump Truck No. 315 with its original box and a small sale sheet featuring a Tonka construction hat. The box has age wear from being in a basement for years but is sturdy and sound. The red/yellow color combination truck shows no playwear, and the tires are perfect. There's a slight tinge of oxidation on the front bumper. Not terrible, but worth mentioning to the discerning collector. Also included is a little promo sheet that came with the toy, offering a value discount on the purchase of a Tonka hardhat.
-
A very nice Jenny the Balky Mule tin litho windup toy with built-in key by the Ferdinand Strauss Corporation. Circa late 1920's, the toy is wound with a key located on the underside of the cart. Wind the key and watch the wheels turn, the mule balk and the farmer rock back and forth.
-
A fantastic Disney, Star Wars Paper Model Kit Set that comes with two detailed model kits - the Millennium Falcon and the X-Wing Starfighter. Fun to build and great to display once they are complete. Stands are included. I've built a kit for myself. They're sturdy and well designed. The perfect gift for your Star Wars fan!
-
1980's Universe Televiboat ME777 Space Toy. A clean tin litho battery operated toy in good working condition. Made in China.
-
Line Mar Calypso Joe the Drummer Mechanical Figurine. A very nice tin litho windup toy with a reproduction box from ToyTent. Joe works perfectly, pounding his drum and rocking back and forth.
-
Ichiko Space Patrol Car Astronaut Driver Head - This is a replacement replica tin head for the Ichiko Space Patrol Car. I fabricated my first one of these from pictures of the original. They are comprised of four pieces, front and rear of the helmet, inside face and outer earmuffs and strap. I have since acquired an original head and have created new tooling so that my replacement head is now near perfect! I also replicate the windshields and frames for this toy which run $175.00. These take about 4 weeks to complete from the time of order.
-
Kanto Battery Operated Space Patrol - Replica Tower and Radar Dish, available ONLY through Uncle Al! - You won't find a more accurate, perfect fitting replica tower anywhere else. An outstanding original was borrowed for reference in the dimensioning, fit and color of this replica and it installs just as the original - an easy installation that you can do yourself with my instructions. The Kanto Space Patrol vehicle is one of the most highly sought after space toy collectibles and many times is missing this critical detail part. My re-creation is made exactly like the original 10 piece part. It comes painted in the correct colors and installs in minutes. This part is hand made to order, so please allow a minimum of two weeks for assembly prior to shipping. Another fine part available nowhere else!
-
Kanto Space Patrol Friction version replica cannon expertly crafted for a perfect fit.
-
Daiya Japan Martian Supersensitive Radar Jeep - These are replacement windshield domes for the Daiya, Martian Supersensitive Radar Jeep. Sold as a set of two for a perfectly matched set and best look.
-
Yonezawa USAF F100 FW 707 Tin Jet Plane Yonezawa F-100 Super Sabre 707, friction powered jet offered separately here and at one time, together with the Yonezawa Jet Plane Base. The plane has the special retainers for locking into the Jet Plane Base, located directly below the main wings. Excellent condition!
-
1930's Wyandotte Boat Tail Racer with Lights in excellent original condition with replacement lights and tires that have been patina aged to match the condition of the racer. The paint has original luster and moderate overall patina. The racer is missing the headlight bar and sold in as-is condition.
-
A 1950's Wyandotte Auto Transport Truck with 4 plastic cars. The toy is approximately 9" long and is an all-metal transport cab and trailer with 4 plastic vehicles in excellent condition!
-
This is a wonderful Bandai Silver Cloud Rolls Royce Hardtop battery operated toy in excellent, fully working condition. A must have for collectors and enthusiasts alike!
-
A Cragstan Piasecki Army Mule Helicopter battery-operated remote control in excellent, fully working condition. The "Cragstan Piasecki Army Mule Helicopter Tin Litho" is a vintage toy that exemplifies the mid-20th-century fascination with military vehicles and aircraft.
-
Nomura Friction #7 Racecar. This beautiful all original toy works perfectly and the litho condition is fabulous.
-
A Nikko USAF Fairchild C120 Friction Pack Plane tin litho toy in excellent, fully working condition. Nose doors open to reveal replacement tank and jeep vehicles. The propellors spin with friction action. There are push buttons that release the main wing segments for shipping and storage.
-
A wonderful 1953 Marusan Kosuge Cadillac friction toy in excellent, fully working condition. A must have for collectors and enthusiasts alike!
-
Kyodo Press Co. KDP Tom and Dick Metal Rail Road Key Wind Hand Car toy. Works well and very whimsical!
-
A 1920's Greppert and Kelch Tin Litho Wind-up Car with Driver #548 in excellent original fully working condition. The toy is marked G. & E. and was made in Brandenburg, Germany.
-
A 1952 Gama Cadillac 300 tin friction powered toy in excellent original condition. Red body paint with a white tin roof. This toy has been in my personal collection for several years and will be a beautiful addition to any tin toy car collector's fleet.
-
This is an early 1950's Tin Friction Packard Convertible Open Car with Driver in excellent original condition. This will be a beautiful addition to any tin toy car collector's fleet.
-
Asahi Corp. Toys Junior Products, battery operated 1/10 scale Lotus 49 Ford F-1 formula race car, CUSTOM, in excellent working condition. This is a beautiful car that Asahi SHOULD have made but didn't. The car sports the engine cover and front spoiler from a Gold Leaf car. I painted the front spoiler in the special yellow/green paint scheme and added the large silver wing. This is car #36.
It has been in my personal collection for several years and displayed in a glass cabinet.,
The toy has a few minor playwear imperfections but nothing distressing and is still a superior condition, working example to display.
-
This is a Cragstan Firebird Speedway Racer friction powered tin toy with RC airplane tires.
-
A 1960's Humble Oil Pump & Derrick toy manufactured by Escon for toy distributor Melvin G. Miller and given as a gift to Humble Oil Refining Co. customers. It is a battery-operated working replica of an oil pump rig and derrick in fully working condition. The battery covers came in two colors, white and red. This toy has an original battery cover that has yellowed over time.
-
A Lehmann Brandenburg Dancing Sailor wind-up tin toy in good, fully working condition. Made in Germany between 1904 and 1948 with a dark blue ribbon representing the vessel Columbia. There is some tattering of the cloth, expected on a toy of this age.
-
1990's Vintage Mask Illusions Hand Critters Boxer Dog Puppet with the original tag. Made from latex rubber.
-
Unique item from the 1970's is this fun and functional 'The Picker' novelty guitar transistor radio in original styro packaging with name plate.
-
The Buffalo Toys Hy-Lo Ferris Wheel was the very first Ferris Wheel toy known to be produced in the United States. The toy was produced from the mid to late 1920's. The toy was created to resemble The Great Ferris Wheel, built for the 1893 World Fair. The toy has six revolving carriages, and each car is shown with eight people in the standing position, which was how passengers were carried in the Great Ferris Wheel. The toy is all tin and utilizes a spring and twisted metal rod propulsion system. As the twisted rod is pulled straight up through the trap doors, tension from the spring pulls the rod back down into the tower, turning the two-inch gear and spinning the wheel. Buffalo Toys used this mechanism in several of their other toy offerings. This Ferris Wheel has been in my personal collection for several years and is in very fine condition for a 100-year-old toy!
-
Hostess With The Mostest Remote Controlled Figure and Bar Cart 1970's Poynter Products - Highly unusual and one of the finest toy in my collection! 1970's Poynter Products 'Hostess with the Mostest' battery operated figure and bar cart, complete with remote control and original instruction sheet. I have no idea how many of these were made but this one is serial #174 and is matched to the powered bar cart. I have never seen another one of these available anywhere. Hostess R/C works perfectly as new. Two very powerful motors under cart can handle the delivery of a full six pack and more as it appears the 31" tall sultry vixen slowly pushes the cart across the floor. The cart dimensions are 16" tall, shelf dimensions are 16" x 10" and width including main drive wheels is 12". Small wires attached to the drive system on one end and in the toes of our 'Giant Babe's' shoes on the other give the illusion of her legs moving back and forth in walking motion. Quite anatomically accurate, she's a sight to behold! Early 1970's, 100% original, serial number and original instructions included.
-
Eldon Dodge Charger Road Race Set. Eldon Dodge Charger Road Race Set, #5859 in excellent working played with condition. As inventoried, the set seems pretty complete with both Charger cars and accessories. A great piece of automotive toy history!
-
Great Planes Spirit of St. Louis, ARF R/C Model Kit. This out of production 'Park Flyer' is a foam construction kit that uses an electric motor as a power source. You need to provide your own servos, controls and batteries. The plane is designed for quick assembly so that you can fly it within a few hours. This has been in my model collection for many years and is almost impossible to find today.
-
Monogram Chrome Wheel Set. Custom Accessories for big 1/8 scale model cars or for customizing Monograms Big "T" and other large-scale models. Monogram Chrome Wheel Set. Custom Accessories for big 1/8 scale model cars or for customizing Monograms Big "T" and other large-scale models. The set includes two chrome reverse wheels and two mag wheels. These were the wheel combinations used on the Monogram Big Tub, the Big Drag and the Big Rod.
-
Monogram Drag Race Set Custom Accessories for big 1/8 scale model cars or for customizing Monograms Big "T" and other large-scale models. Monogram Drag Race Set. Custom Accessories for big, 1/8 scale car models. Complete. This set includes many of the items used to create the Monogram Big Drag, such as the Footprint Gas Pedal and roll bar.
-
Horikawa Space Explorer Robot aka TV Robot is in very nice, working condition. The robot walks with a lighted space scene in his chest and spinning, shoulder mounted antenna.
-
The Marx Moon Creature Robot Windup from 1963 is a delightful piece of toy history, encapsulating the excitement and optimism of the space age. Its charm lies not only in its playful design but also in its representation of a bygone era's hopes and dreams about the future. For collectors and enthusiasts, it offers a tangible connection to the past and a reminder of the enduring appeal of imaginative toys. Whether as part of a collection or as a standalone display item, this robot is a cherished piece for anyone fascinated by the intersection of toys, history, and space exploration.
-
Marx Hi Bouncer Moon Scout astronaut - a very rare robot man indeed! Hi-Bouncer was so named because of the 'Hi-Bounce' superball style rubber balls that he shoots from his chest. This toy works wonderfully but is not 100% original. The toy has my replica working/lighted antenna, 5 correct size rubber balls and a replacement remote control, all in a beautiful replica box. The two button remote functions are robot walking and robot shooting. 5 rubber balls are loaded into a small compartment in the back of Hi Bouncers head.
-
Vintage Marx Colonel Hap Hazard Astronaut Robot battery operated toy in very nice replica box. Hap Hazard operates on two 'C' cell batteries inserted into his back behind his oxygen bottles. He has a movable clear visor and spinning flashing replacement antenna. The arms swing as he walks. Colonel Hap Hazard is on the move and looking for his friend, the Marx Moon Creature! There is a spinning antenna on top which is pretty big by the way that houses 2 lights, in green and in red. Colonel Hap Hazard was built for Marx (Louis Marx and Co.) in Japan but it's unknown who the original manufacturer was for this astronaut. His upgraded version is called the Marx Hi-Bouncer Moon Scout.
-
1950's Irwin Toys Spaceman wind-up toy in beautiful replica box made in the USA. Spaceman is a plastic wind-up toy just under 11" tall to the top of his antenna. When you wind him up, he walks forward with a swaying motion and alternately swings his ray guns. This toy was molded in several colors, red being one of the rarest. This toy is completely molded in orange.
-
1950's Irwin Toys Spaceman wind up toy in beautiful replica box made in the USA. Spaceman is a plastic wind up toy just under 11" tall to the top of his antenna. When you wind him up he walks forward with a swaying motion and alternately swings his ray guns. This toy was molded in several colors, RED being one of the rarest. The arms of this toy are the common orange but the body is RED.
-
A vintage Taiyo Japan Blink-A-Gear Robot in a very nice replica box. This very large (15" tall) battery operated robot has wonderful moving action. He walks and swings his arms, has lighted moving eyes and visible spinning chest gears. He operates on two'D' cell batteries and is in extremely nice working condition. This is a very nice, RARE and LARGE robot for your collection and a perfect mate to the RARE Wheel-A-Gear Robot!
-
Vintage Taiyo Wheel-A-Gear Robot Japan in a very nice replica box. This very large (15" tall) battery operated robot has wonderful action as he walks and swings his arms, lighted moving eyes and visible spinning chest wheels that are belt driven. He operates on two 'D' cell batteries and is in extremely nice working condition. This is a very nice, RARE and LARGE robot for your collection!
-
A replacement Canopy for the Bandai Area Radiation Tester. The pivotal and meticulously crafted component, embodying precision and authenticity to cater to the discerning needs of enthusiasts and collectors seeking to revive the functionality and aesthetics of their cherished vintage radiation testers.
-
Cragstan Mr. Robot Replacement Eyes. This is a set of replacement eyes for the Cragstan Mr. Robot. These easily glue in place with just a couple drops of super glue.
-
Reproduction Whistle for the Masudaya Sonicon Rocket. With a blow of the whistle, you control the direction of the rocket. Guaranteed to perform just like the original whistle!
-
A replacement Amber Canopy for the A.L. Maxey Challenger Jr. race car. Created from a mold taken of an original part to ensure an accurate fit.
-
The Robby Space Patrol, Moon Patrol replacement lens is available in red or green. This high-quality replacement part is guaranteed to be a perfect fit! Please specify your color choice.
-
A clear replacement canopy for the K logo/Alps Space Fighter X-Y-105 space toy.&amp;amp;lt;/p>
-
Thomas Toys Atom Bomber B-29, Replacement Metal Bomb - This is a replacement metal bomb for the 1950's Thomas Toys plastic B-29 Atom Bomber toy aircraft. It was made from a mold of an original toy part and is authentic to the toy.
-
Yonezawa X-5 Space Tank Replica Antennas - These replacement antennas are two-piece spring and plastic ball parts modeled after original toy parts and are a guaranteed fit. You get one red ball antenna and one blue ball antenna.
-
Alps Television Spaceman and Revolving Flashing (Door) Robot Replica Ears. These new red ears come as a set to complete your toy. Simply glue in place with a few drops of super glue.
-
Replacement steering knuckle for the battery operated Yonezawa Electro Special 21 Racer. These are often broken on the 21 cars. The tooling for this part is created from an original steering knuckle to ensure a perfect, factory fit. Just remove from the package and install on your car. Absolutely no disappointments with this part! Other parts are available for this toy. The toy pictured is used to clarify the part in this listing and is not for sale.
-
Tin replacement battery box cover for the battery operated Yonezawa Electro Special 21 Racer. These are often missing from the 21 cars. The tooling for this cover was created from an original cover to ensure a perfect, factory fit. The cover is primed and finished in an automotive lacquer that matches the Yonezawa black color and then polished. Just remove from the package and install on your car. Absolutely no disappointments with this part! Other parts are available for this toy. The toy pictured is used to clarify the part in this listing and is not for sale.